2010 SMART FORTWO COUPE service reset

Technical data (dimensions)see Vehicle specification
Technical data (electrical system)
see Vehicle specification
Technical data (engine)
see Vehicle specification
Technical data (weights)
see Vehicle specification
Temperature
Coolant .................................. 140
Interior temperature .................93
Outside ................................... 86
Tether anchorage points
see Children in the vehicle
Tightening torque
Wheels ................................... 125
TIN (Tire Identification
Number) ................................. 129, 131
Tire and Loading Information
placard ....................................... 120
Tire and loading terminology .......... 130
Tire Identification Number see TIN
Tire inflation pressure
Checking ................................ 116
Important notes on ....................116
Placard on driver’s door B-
pillar .................................... 120
Tire labeling ............................... 125
Tire load rating ........................... 131
Tire ply composition and material
used ........................................... 132
Tire Pressure Monitoring System
(TPMS) ......................................... 117
Tire repair kit ....................... 148, 172
Tires .................................... 114, 202
Air pressure ............................ 115
Care and maintenance ...............123
Cleaning ................................ 124
Direction of rotation, spinning ..123
Driving instructions ................. 137
Flat tire ................................. 172
Important notes on tire
inflation pressure ....................116
Inflation pressure ...............116, 117
Information placard .................120
Inspection .............................. 123Labeling ................................ 125
Load rating ............................. 131
Ply composition and material
used ...................................... 132
Problems under-/overinflation ...116
Retreads ................................. 114
Rims and tires (technical data) ...202
Rotation ................................. 125
Service life ............................ 123
Sizes ..................................... 202
Snow chains ............................ 133
Speed rating ................ 127, 132, 138
Storing .................................. 124
Temperature ...................... 116, 125
Terminology ............................ 130
Tire Identification Number ..129, 131
Tire Pressure Monitoring
System (TPMS) .......................... 117
Traction ...................... 125, 132, 137
Tread ..................................... 132
Tread depth ....................... 123, 132
Treadwear indicators ..........123, 132
Vehicle maximum load on ...........132
Winter tires ...................... 132, 202
Tire speed rating .................... 127, 132
Top tether see Children in the vehicle
Total load limit ........................... 132
Tow-away alarm ............................. 48
Towing ........................................ 185
Traction ................................ 132, 137
Transmission see Automatic transmission
Transmission position indicator ...... 85
Transmitting power values .............. 196
Traveling abroad .......................... 140
Tread (tires) ................................ 132
Tread depth (tires) .................. 123, 132
Treadwear indicators (tires) ..... 123, 132
Trip odometer, resetting ................. 88
Turning off the engine .................... 79
Turn signal lamps ......................... 165
Turn signals ................................. 65
Indicator lamps ....................... 155Keywords11451_AKB; 3; 22, en-USd2ureepe,Version: 2.11.8.12009-07-27T09:36:34+02:00 - Seite 11

iIf the seat, including the trim cover and
cushion, needs to be serviced in any way,
take the vehicle to an authorized smart
center. Only seat accessories approved
by smart may be used.
Both driver and the passenger should
always use the 007F 007B indicator
lamp as an indication of whether or not
the passenger is properly positioned
( Y page 40).GWarning!
If the 007F 007B indicator lamp
illuminates when an adult or someone
larger than a small individual is in the
passenger seat, have the passenger re-
position himself or herself in the seat
until the 007F 007B indicator lamp
goes out.
In the event of a collision, the air bag
control unit will not allow passenger front
air bag deployment when the OCS has
classified the passenger seat occupant as
being up to or less than the weight of a
typical 12‑month‑old child in a standard
child restraint, or if the passenger seat is
sensed as being empty.
When the OCS senses that the passenger seat
occupant is classified as being up to or
less than the weight of a typical
12‑month‑old child in a standard child
restraint, the 007F 007B indicator
lamp will illuminate when the ignition is
switched on and remain illuminated,
indicating that the passenger front air bag
is deactivated.
When the OCS senses that the passenger seat
is classified as being empty, the
007F 007B indicator lamp will
illuminate and remains illuminated.
When the OCS senses that the passenger seat
occupant is classified as being heavier
than the weight of a typical 12‑month‑old
child seated in a standard child restraint
or as being a small individual (such as a
young teenager or a small adult), the
007F 007B indicator lamp will
illuminate for approximately 4 seconds
when the ignition is switched on and then,
depending on occupant weight sensor
readings from the seat, remains
illuminated or goes out.
When the 007F 007B indicator lamp is
illuminated, the passenger front air bag is
deactivated.
When the 007F 007B indicator lamp is
out and the passenger seat is occupied by
an adult or someone larger than a small
individual, the passenger front air bag is
activated.
When the OCS senses that the passenger seat
occupant is classified as an adult or
someone larger than a small individual, the
007F 007B indicator lamp will
illuminate for approximately 4 seconds
when the ignition is switched on and then
goes out, indicating that the passenger
front air bag is activated.
If the 007F 007B indicator lamp is
illuminated, the passenger front air bag is
deactivated and will not be deployed.
If the 007F 007B indicator lamp is not
illuminated, the passenger front air bag is
activated and will be deployed
R in the event of certain frontal impacts
R if impact exceeds a preset deployment
threshold
R independently of the head-thorax air
bags
If the passenger front air bag is deployed,
the rate of inflation will be influenced by
R the rate of vehicle deceleration and a
fastened or unfastened seat belt as
assessed by the air bag control unit
R the passenger’s weight category as
identified by the OCS38Occupant safety>> Safety.
451_AKB; 3; 22, en-USd2ureepe,Version: 2.11.8.12009-07-27T09:36:34+02:00 - Seite 38

Trip odometer display
Example illustration (U.S. vehicles)
XSelecting trip odometer display: Press
left button 0046 (Y page 87) repeatedly
until the trip odometer display appears
in the status indicator.XResetting trip odometer display: Press
and hold left button 0046 (Y page 87) until
the value is set to 0.
Maintenance service interval display
Example illustration (U.S. vehicles)
i Canada vehicles: The maintenance
service interval display shows km
instead of miles.
The maintenance service interval display
will notify you approximately one month
before the next maintenance service is
due.
The following information will be
displayed after starting the engine:
R Days or distance to next maintenance
service
This information will be displayed
instead of the main odometer display.
The main odometer display will reappear
after approximately ten seconds
( Y page 85).
R Type of service that is due
This information will be displayed in
the status indicator.XStart the engine.XSelecting maintenance service interval
display: Press left button 0046 (Y page 87)
repeatedly until the maintenance
service interval display appears in the
status indicator.
Depending on the type of maintenance
service that is due, symbol ¬ or } is
displayed.XClearing maintenance service interval
display: Press left button 0046 (Y page 87)
once.
The maintenance service interval
display is cleared.XActivating maintenance service
interval display: Press left button 0046
( Y page 87) twice in quick succession.
Reserve fuel indicator
Example illustration (U.S. vehicles)
88Instrument cluster>> Controls.
451_AKB; 3; 22, en-USd2ureepe,Version: 2.11.8.12009-07-27T09:36:34+02:00 - Seite 88