General information
4
– Set the desired value by turning the menu control button .
You can select between the following parameters:
BASS - bass setting;
MIDDLE - midtone setting;
TREBLE - treble setting;
BALANCE - setting of the volume ratio between the left and right side;
FA D E R * - setting of the volume ratio between the front and the rear;
ON VOL
PDC VOL
GALA
LO U D - in case of low volume level, this fu nction reinforces the range of bass and
treble frequencies.
ON VOL
Your radio stores the last volume set before switching off. If the value is higher, the
volume is reduced to the value of the parameter ON VOL after switching on the radio
again.
GALA
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
PDC VOL*
If your vehicle is eq uipped with “parking ai d”, the volume is automatically decreased
to a pre-defined value, when the “parking aid” is active.
Setting the special functions– Press the menu control button for a long period of time.
– Select the individual functions of the menu with the help of the station keys.
– Set the desired value using the menu control button or with the help of the station keys. AUX*
Switching on or off the functions of the external audio source.
Setting of the input sensitivity
AUX LEV:
AUX LEV 1 - high level, used in particular for notebooks;
AUX LEV 2 - middle level, used for cassettes or CD player;
AUX LEV 3 - low level, used for MP3 player;
PHONE*
If your vehicle is eq uipped with a handsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
vehicle.
BEEP
Switching on or off the tone signal when storing the radio stations.
ILLUM
Switch on (value 2) or switch off (value 1) the rear lighting of the control buttons.
AF
The function alternative frequency (AF) ensu res that the best receivable frequency of
the selected station is automatically and precisely set. The replay of the broadcast can
be muted briefly during the search process a ccording to the best receivable frequency.
If no alternative frequency of the set stat ion can be found and the station no longer
offers a satisfactory quality, then please select another station.
REG
Certain programs of the broadcasting companies are divided into regional programs at
specific times. That is why in individual re gions the regional programs of a station can
broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected station.
If the quality is however so low, that there is a risk of a “program loss”, the unit also
accepts “related” frequencies.
FIX - the receiver switches to a regional “related” station, if the reception of the
current station could be interrupted;
AUTO - the receiver can access the re gional “related” station unlimited.
A2
A2
A2
s214.14.book Page 4 Thursday, January 28, 2010 1:29 PM
