Fuses and light bulbs235
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Light unit (Octavia)Fig. 197 Luggage compartment: Cover for th e lamp holder / removing the lamp holderChanging light bulbs in the lamp holder– Switch the ignition and all lights off.
– Unlock the locking button and open the cover of the lamp holder fig. 197 - left.
– Press the catches in the direction of arrow and take out the lamp holder fig. 197
- right.
– Press the defective light bulb into th e socket, turn to the left and remove.
– Press a new light bulb into the socket and turn the light bulb to the right as far as
the stop.
– Insert the lamp holder in such a way that the catches lock in place in the housing.
– Close and lock the cover of the lamp holder.Change the light bulb for the parking light– Switch the ignition and all lights off.
– Unlock the locking button and open the cover of the lamp holder fig. 197 - left.
– Take the defective light bulb (arrow or ) out of the housing and replace it with
a new one.
– Close and lock the cover of the lamp holder.
Rear light unit (Combi)Fig. 198 Luggage compartment: Side co mpartment / removing the lamp holderChanging light bulbs in the lamp holder– Switch the ignition and all lights off.
– Remove the side compartment cover by turning the locks in the direction of arrow
fig. 198 - left.
– Take out the cover of the lamp holder on the luggage compartment side.
– Take out the light bulbs of the tail light (arrow and ).
– Press the catches in the direction of arrow and take out the lamp holder.
– Press the defective light bulb into th e socket, turn to the left and remove.
– Press a new light bulb into the socket and turn the light bulb to the right as far as the stop.Change the light bulb for the parking light– Switch the ignition and all lights off.
– Remove the side compartment cover by turning the locks in the direction of arrow fig. 198 - left.
– Take out the cover of the lamp holder on the luggage compartment side.
– Take the defective light bulb (arrow or fig. 198 ) out of the housing and
replace it with a new one.
A1
A2
A1
A2
A1
A2
s43s.1.book Page 235 Thursday, May 13, 2010 1:21 PM
