2010 Seat Leon 5D navigation system

Audio mode33
Note
If you insert a number of different CDs and receive the message CD drive error
every time, contact a qualified workshop.Inserting and removing memory cardsOnly supported audio files are displayed and played in the MEDIA main
menu. Other file types will be ignored.
A compatible memory card is indicated by SD card or
K on the screen.
Inserting the memory card
If a memory card cannot be inserted, make sure it is positioned correctly and
is compatible with the unit.
•Insert a compatible memory card into the memory card slot ⇒page 8,
fig. 1 with the cut-off corner first and facing upwards until the card clicks
into place.•Playback starts automatically if supported audio files are stored on the
memory card.
Manually removing the memory card•Press the inserted memory card. The memory card “jumps” to the eject
position.•Remove the memory card.
Memory card cannot be read
If legible audio files have not been stored on a memory card, the unit will not
change to memory card mode after it is loaded.
If the unit cannot read from the memory card at all, you will also be informed
by a pop-up window.•Press the function button. If an illegible memory card or an card which does not contain audio files is
inserted, the function button for the
Media selection menu remains inac-
tive ⇒page 37.
The memory card must be removed manually.
External audio source connected to the AUX-IN multimedia socketThe AUX-IN multimedia socket ⇒page 8, fig. 1 can only be used with a
3.5 mm jack plug.
The external audio source connected to it is played over the vehicle speakers
and cannot be controlled via the radio-navigation system.
An external audio source connected to the socket is indicated by AUX on the
screen.
A12
OK
K
Fig. 27 External audio
source connected to AUX
IN multimedia socket.
A9
MediaSystem2.1_EN.book Seite 33 Donnerstag, 29. April 2010 4:18 16

Audio mode
34Connecting an external audio source to the AUX IN multimedia socket•Lower the base volume on the radio-navigation system ⇒page 10.•Connect the audio source to the AUX IN multimedia socket.•Start playback on the external audio source.•In the MEDIA main menu, press the unit button to open the media
selection menu ⇒page 37, fig. 33 .•Press the function button to start playback of the external audio
source over the vehicle speakers ⇒page 37.
The output volume of the connected external audio source should be
adjusted to the volume of the other audio sources ⇒page 41.
Information on operating an external audio source connected to the AUX-IN
multimedia socketNote
Interference may be heard if the external audio source is powered from the
vehicle's 12-volt socket.
Note
Please read and observe the external audio source manufacturer operating
manual.
Additional AUX2 external audio sourceIf the vehicle does not have a MEDIA-IN or MDI multimedia interface, an addi-
tional audio source called AUX2 is made available to the user. This source can
Action
Result
Selection of another audio source on
the radio-navigation system.
The external audio source continues
to run in the background.
Stopping playback on the external
audio source.
The radio-navigation system remains
in the AUX menu.
Disconnecting the plug from the
AUX-IN multimedia socket.
The radio-navigation system
switches to playback of the previous
media source.MEDIA
AUX
Fig. 28 Media setup
menuFig. 29 When the AUX2
input is activated, the
AUX2 audio source is
displayed on the media
selector and is always
shown as active.
MediaSystem2.1_EN.book Seite 34 Donnerstag, 29. April 2010 4:18 16

Audio mode35
be used to play audio from an external player connected to a Rear Seat Enter-
tainment (RSE ) device through the vehicle sound system
2).
The audio from the external player connected to the RSE is played through the
vehicle loudspeakers but cannot be controlled with the radio and navigation
system controls.
An external audio source connected to the socket is indicated by AUX2 on the
screen.
Playing audio from an RSE system using an additional external audio source
•Lower the base volume on the radio-navigation system ⇒page 10.•Connect the external player to the AUX-RSE connector in the vehicle and
start playback on the external player in accordance with the instructions
given in the RSE handbook.•In Media mode, press the unit button to open the Media setup
menu . Tick the checkbox Activate AUX2 input so that the AUX2 source is
shown in the Media selection menu
3) ⇒ page 34, fig. 28 .
•In the MEDIA main menu, press the unit button to open the Media
selection menu .•Press the AUX2 ⇒ page 34, fig. 29 function button to start playback of the
external audio source connected to the RSE over the vehicle speakers.
The output volume of the connected external audio source should be
adjusted to the volume of the other audio sources ⇒page 41 ( AUX2 volume
in the Media settings menu ⇒ page 34, fig. 28).
Things to note about the AUX2 additional external audio source•If another audio source (CD, SD, etc.) is selected during playback, the
external player connected to the RSE continues playing.
•When playback on the external audio source has finished or if the external
player is disconnected from the AUX-RSE connector, the radio and navigation
system remains in the AUX2 menu.•The AUX2 symbol remains visible and on (highlighted in red), and there-
fore accessible, as long as the “ Activate AUX2 input” check box in the (Media
setup menu ) is ticked. The option should be deactivated when playback has
finished.
Recommendations for use•If your vehicle is not fitted with an RSE system or a MEDIA-IN or MDI multi-
media interface, we recommend that the Activate AUX2 input is always left
unticked . Otherwise, the AUX2 source (if your vehicle does not have MDI) or
the “MDI” source may be shown in the Media selection menu as “active”
(accessible), even if there is no audio source connected to them.•If your vehicle is fitted with a MEDIA-IN or MDI multimedia interface , the
AUX2 additional external source is not available. Use the check box Activate
AUX2 input as described in the section MEDIA-IN or MDI multimedia
interface .
2)If the vehicle is supplied from the factory with an RSE system connected to the radio
and navigation system.3)This option can also be activated using the function button in the pop-up window
which appears when you try to go to the MEDIA main menu when there is no media
source connected or activated.
SETUP
MEDIA
MediaSystem2.1_EN.book Seite 35 Donnerstag, 29. April 2010 4:18 16

Audio mode
36External audio source connected via Bluetooth
®
In Bluetooth audio mode, audio files from an external audio source
connected by Bluetooth
® can be played over the vehicle speakers. The
external audio source must be compatible with the Bluetooth A2DP profile. The external audio source connected via Bluetooth
®
cannot be controlled via
the radio-navigation system.
Starting Bluetooth audio transfer
•Pair and connect the external audio source with the Bluetooth interface of
the mobile telephone provision as described in the owner's manual.•Lower the base volume on the radio-navigation system ⇒page 10.•Start playback on the Bluetooth external audio source.
Depending on the unit, you can start playback of the Bluetooth audio source
via the Media selection menu ⇒page 36.
Starting Bluetooth audio playback•In the MEDIA main menu, press the unit button to open the Media
selection menu .•Select the Bluetooth function button for the mode described
⇒ page 37.
Bluetooth Audio mode is indicated by BT audio or

on the screen.
When playback on the external audio source is stopped, the radio-navigation
system remains in the Bluetooth audio menu ⇒fig. 30. To switch to another
audio source, it must be selected manually ⇒page 37.
Note
The output volume of the connected external audio source should be
adjusted to the volume of the other audio sources ⇒page 41.
Note
Always switch off the warning and service tones on a connected Bluetooth
audio source, e.g. key tones on a mobile telephone, to prevent interference
noise and malfunctions.
Fig. 30 Bluetooth audio
mode.Fig. 31 Media selection
menu with BT audio
selected.
MEDIA


MediaSystem2.1_EN.book Seite 36 Donnerstag, 29. April 2010 4:18 16

Audio mode41
In units with RDS, the TP function can be switched on by ticking the check box
on the function button ⇒page 21.
Adjusting playback volume
If you need to increase the output volume of an external audio source, first
lower the base volume on the radio-navigation system ⇒page 11.
If the sound from the external audio source is too low, if possible, increase
the output volume on the external audio source. If it is too low, increase the
input volume.
If the sound from the connected external audio source is too loud or
distorted , if possible, lower the output volume on the external audio source.
If it is still too loud, lower the input volume.
WARNING
If the volume is too high, you could damage your hearing. Even if the
volume is too loud for a short period only.
Caution
If the volume is too high or the sound is distorted, the vehicle speakers may
be damaged.
’Traffic News (TP)
MediaSystem2.1_EN.book Seite 41 Donnerstag, 29. April 2010 4:18 16

Audio mode
42MEDIA-IN multimedia interfaceIntroductionFor the ALHAMBRA model, depending on the version, the MEDIA-IN multi-
media interface is in the passenger storage compartment or the centre
armrest between the two front seats.
For the ALTEA, ALTEA XL, ALTEA Freetrack and LEON models, the MEDIA-IN
multimedia interface offers users a USB connector and an AUX connector,
located on the centre console in the Leon and under the front armrest in the
Alteas.
The supported file formats listed below are collectively referred to in this
manual as “audio files”.
Audio files on an external data medium connected to the MEDIA-IN multi-
media interface can be played and controlled via the radio and navigation
system.
Where this manual refers to external data media, this means USB mass
storage devices containing supported audio files, such as MP3 players,
iPods
® and USB sticks. External data media are displayed as MDI (Media
Device Interface).
The MEDIA-IN multimedia interface supplies the usual USB voltage of 5 volts.
Additional Information:
•Safety notes
’ ⇒ page 6
•Unit overview ⇒page 8•Media mode ⇒page 29Note
The rubber mat in the storage compartment of the MEDIA-IN multimedia inter-
face can be removed.
Information on connecting a data mediumFig. 38 MEDIA-IN socket for Altea and LeonData medium connection adapter
An adapter is required to connect the external data medium to the MEDIA-IN
multimedia interface ⇒fig. 39 .
Do not use memory card adapters, USB extension cords or USB hubs!
Fig. 39 MEDIA-IN multi-
media interface
MediaSystem2.1_EN.book Seite 42 Donnerstag, 29. April 2010 4:18 16

Audio mode43
Notes and requirements
Notes and restrictions
Only audio files that can be read via the MEDIA-IN multimedia interface can
be displayed, played and controlled on the radio and navigation system.
In the case of MTP players and depending on the battery charge and the
quantity of data, it may take a few minutes for them to be ready for use.
If an external data medium is divided into several partitions, only the first
partition with compatible audio files will be played.
Please observe the additional instructions and restrictions regarding the
requirements for multimedia sources ⇒page 29.
Connecting and operatingBefore connecting or playing an external data medium, turn down the volume
on the radio-navigation system ⇒ page 11.
Compatible data media
Legible files and formats
Data media compliant with the
USB 2.0 specification.
Data media with the FAT file sys-
tem FAT16 (< 2 GB) or FAT32 (> 2
GB).
iPods
® and iPhones
® of various
generations
a).
MTP players with the “PlaysFor-
Sure” or “ReadyForVista” logo.
a)iPod® and iPhone
® are protected registered trademarks of Apple Inc.
- Audio files in MP3, WMA, OGG-Vorbis
and AAC format.
Playlists in PLS, B4S, ASX and WPL for-
mat.
Please read and observe the external data medium operating instructions.
Fig. 40 MEDIA main
menu: MDI multimedia
source (MEDIA-IN multi-
media interface).Fig. 41 Selection menu
for a connected iPod.
MediaSystem2.1_EN.book Seite 43 Donnerstag, 29. April 2010 4:18 16

Audio mode
44Connecting and disconnecting an external data medium (MDI)•Connect the appropriate adapter to the MEDIA-IN multimedia interface
⇒ page 42.•Connect the external data medium to the MEDIA-IN multimedia interface
via the adapter.•I f n e ce s sa r y, s wi tch o n t h e e x t e r na l d a ta m e d i u m o r s e l e c t t h e a p p r o p r i a t e
data mode.
Even though the display may indicate otherwise, the external data medium
may be disconnected from the MEDIA-IN multimedia interface at any time
without data loss.
Connecting or disconnecting an external data medium (MDI) - Altea, Altea XL,
Altea Freetrack, Leon
– Connecting a mass storage device or player with a USB connection
Connect the device to the USB connector of the MEDIA-IN interface.
If necessary, start playback in the external device.
– Connecting an iPod or iPhone in order to control it from the radio and
navigation system
Connect the iPod or iPhone to the MEDIA-IN interface using the cable or
special iPod adapter provided by SEAT.
– Connecting an external device to the AUX input of the MEDIA-IN interface
Connect the device to the AUX input of the MEDIA-IN interface with the
right cable.
Even though the display may indicate otherwise, the external data medium
may be disconnected from the MEDIA-IN multimedia interface at any time
without data loss.
Control through the radio and navigation system
An external data medium correctly connected to the MEDIA-IN multimedia
interface can be controlled through the radio and navigation system. Depending on the unit, when an external data medium is connected and
switched on, it is necessary to change to the radio and navigation system
manually for playback.
•Open the
MEDIA main menu.•Press the unit button to open the Media selection menu .•Press the function button to start or resume playback from the
external data medium.
Further operation of the external data medium (changing track, selecting
tracks and playback modes) is described in the appropriate chapters of this
manual ⇒page 29.
If the selected media source is disconnected from the MEDIA-IN multimedia
interface while being played, the radio and navigation system will remain in
MDI mode. Another audio source must be selected manually.
Special features. ALTEA and LEON models
Depending on the vehicle equipment, from the radio and navigation unit and
via the MEDIA-IN interface, the user can:•play and control audio files from a mass storage device or MP3 player with
USB, iPod or iPhone connection.•play audio from an external player connected to the AUX input of the
Media-In Interface•play audio from an external player connected to the AUX input of the Rear
Seat Entertainment system (if fitted in the vehicle)
Sometimes the additional auxiliary input of the Media-In interface must be
activated in order to use the MDI media source in the media selector.
Activation:•ticking the Activate AUX2 input check box in the Media Setup Menu or,•this option can also be activated using the function button in the pop-up
window which appears when you try to go to the MEDIA main menu when
there is no media source connected or activated.
MEDIAMDI
MediaSystem2.1_EN.book Seite 44 Donnerstag, 29. April 2010 4:18 16