2010 Seat Leon 5D manual radio set

Audio mode
44Connecting and disconnecting an external data medium (MDI)•Connect the appropriate adapter to the MEDIA-IN multimedia interface
⇒ page 42.•Connect the external data medium to the MEDIA-IN multimedia interface
via the adapter.•I f n e ce s sa r y, s wi tch o n t h e e x t e r na l d a ta m e d i u m o r s e l e c t t h e a p p r o p r i a t e
data mode.
Even though the display may indicate otherwise, the external data medium
may be disconnected from the MEDIA-IN multimedia interface at any time
without data loss.
Connecting or disconnecting an external data medium (MDI) - Altea, Altea XL,
Altea Freetrack, Leon
– Connecting a mass storage device or player with a USB connection
Connect the device to the USB connector of the MEDIA-IN interface.
If necessary, start playback in the external device.
– Connecting an iPod or iPhone in order to control it from the radio and
navigation system
Connect the iPod or iPhone to the MEDIA-IN interface using the cable or
special iPod adapter provided by SEAT.
– Connecting an external device to the AUX input of the MEDIA-IN interface
Connect the device to the AUX input of the MEDIA-IN interface with the
right cable.
Even though the display may indicate otherwise, the external data medium
may be disconnected from the MEDIA-IN multimedia interface at any time
without data loss.
Control through the radio and navigation system
An external data medium correctly connected to the MEDIA-IN multimedia
interface can be controlled through the radio and navigation system. Depending on the unit, when an external data medium is connected and
switched on, it is necessary to change to the radio and navigation system
manually for playback.
•Open the
MEDIA main menu.•Press the unit button to open the Media selection menu .•Press the function button to start or resume playback from the
external data medium.
Further operation of the external data medium (changing track, selecting
tracks and playback modes) is described in the appropriate chapters of this
manual ⇒page 29.
If the selected media source is disconnected from the MEDIA-IN multimedia
interface while being played, the radio and navigation system will remain in
MDI mode. Another audio source must be selected manually.
Special features. ALTEA and LEON models
Depending on the vehicle equipment, from the radio and navigation unit and
via the MEDIA-IN interface, the user can:•play and control audio files from a mass storage device or MP3 player with
USB, iPod or iPhone connection.•play audio from an external player connected to the AUX input of the
Media-In Interface•play audio from an external player connected to the AUX input of the Rear
Seat Entertainment system (if fitted in the vehicle)
Sometimes the additional auxiliary input of the Media-In interface must be
activated in order to use the MDI media source in the media selector.
Activation:•ticking the Activate AUX2 input check box in the Media Setup Menu or,•this option can also be activated using the function button in the pop-up
window which appears when you try to go to the MEDIA main menu when
there is no media source connected or activated.
MEDIAMDI
MediaSystem2.1_EN.book Seite 44 Donnerstag, 29. April 2010 4:18 16

Navigation
48longer be up-to-date. This may lead to inaccurate or incorrect route
guidance.Updating the internal navigation data memoryThe navigation data is already in the navigation data memory and can be
used directly ⇒page 48.
If the navigation database is updated, or if data from another country is over-
written, the former data will be erased and cannot be recovered.
Updating navigation data
A memory card containing updated navigation data can be obtained from an
Authorised Service.•Cancel the mechanical protection against overwriting in the memory card.•Inserting the memory card ⇒page 29. If the inserted memory card contains valid navigation data, a window opens
asking whether you wish to permanently allocate the memory card to the
radio navigation system.
Due to licensing legislation, when the copy has been completed, the memory
card will be allocated to this radio and navigation system and can
not be used
for other radio and navigation units.
•Press the function button to continue.
Information about the navigation data installed and available on the memory
card is displayed.•Press the function button to start copying the information.
No navigation functions are available during the copying process. The
copying process lasts approximately 2 hours.
Do not remove the memory card while the navigation data is being copied.
This could damage the memory card!
If the unit is switched off during the copying process, the process stops and
will start automatically when the unit is switched back on.
Starting the copying process manually
If the copying process does not start automatically after the memory card
containing valid navigation data has been inserted, the updating process can
be started manually.•Press the unit button.•Press the unit button.•Activate by turning and pressing the setting knob
⇒ page 8, fig. 1 ⇒ fig. 42.•Press the function button to view the area
of navigation and the version of the navigation data stored.•Press the function button to start copying the
information.
Fig. 42 Navigation setup
menu.
AssignUpdateNAVSETUPNavigation data base
A10Display navigation database infoInstall Nav data from SD
MediaSystem2.1_EN.book Seite 48 Donnerstag, 29. April 2010 4:18 16

Navigation
66•To permanently retain the manually selected map scale, “Autozoom”
must be deactivated in the Navigation setup menu ⇒ page 73.
Selecting the map view mode
The map view mode can be changed.•In the map, briefly press the bottom-right or bottom-left area of the screen
to display the function buttons again.•Press the function button ⇒page 65, fig. 65 .•Select one of the playback modes displayed in the pop-up window.
: two dimensions, map oriented to North.
: two dimension, map oriented to vehicle heading.
: three dimensions, birds-eye view of map.
Alternatively, it is possible to switch between the three map views by pressing
on the compass shown on the map.
During route guidance, the calculated route can also be shown on an over-
view map.•Press in the pop-up window to display current position and
destination.
The scale of the overview map cannot be changed.•Press the function button to return to the last shown map view.
Displaying speed limits
If there is a speed limit stored in the navigation data for the road along which
you are travelling, this will be displayed on the map. During route guidance,
the arrow indicating a change of direction takes precedence over the speed
limit display.
Please remember that the navigation data may not be up-to-date and that the
system has limitations ⇒ page 47! The speed limit display is activated in the navigation system settings
⇒
page 73.
Points of interest on map
Depending on the programmed settings, points of interest (petrol stations,
car parks, Authorised Services) will be displayed as symbols on the map
⇒ page 73.
Note
If you miss a turning during route guidance and are currently unable to turn
back, keep on driving until the navigation system offers a new route.
Note
T he q ua lit y o f the i nst ru cti ons g ive n by th e uni t will d e pe nd o n th e navi gat io n
data used.
Note
In addition, the route is optimised with the TMC traffic news received
⇒page 70. The radio stations broadcasting this information are responsible
for the content and the quality of the TMC traffic reports.
Extras
2D North2D Heading3D Heading
Overview map
Back
MediaSystem2.1_EN.book Seite 66 Donnerstag, 29. April 2010 4:18 16

Navigation
72The unit only processes and displays TMC traffic reports affecting the area
within a radius of roughly 100 km from the current vehicle position.
TMC traffic reports are required for dynamic route guidance and are displayed
on the map ⇒ page 70.
Display TMC traffic reports•Press the unit button to display the list of the current TMC traffic
reports ⇒page 71, fig. 72 .•Press one of the TMC traffic reports on the screen to open the detailed
view ⇒page 71, fig. 73 .•Alternatively: select the TMC report by turning the setting knob
⇒ page 8, fig. 1 and open the detailed view by pressing ⇒page 71,
fig. 73 .•In the detailed view, you can browse through the TMC traffic reports using
the function buttons and .
Display TMC traffic news stations•Open the list of the current TMC traffic reports.•Press the ⇒page 8, fig. 1 unit button to open the information
window. The current TMC traffic news station is displayed.•Press the unit button again to close the information window.Note
By using the ⇒ page 71, fig. 72 function button it is
possible to enter a manual exclusion from the vehicle position ⇒page 70.
Note
The radio-navigation system can only process and store TMC traffic reports if
the unit has access to navigation data for the area you are currently travelling
through.
Note
The quality of the dynamic route guidance depends on the information
contained in the TMC traffic reports. Th e radio stations are responsible for the
content of the news broadcast.Route guidance in demo modeIf demo mode is activated in the Navigation setup menu ⇒ page 73, an addi-
tional pop-up window opens when you start route guidance.•Pressing the function button starts a “virtual route guidance” to
the destination you have entered.•If you press the function button, a “real route guidance” starts.
The sequence of events and the operations in virtual route guidance are
similar to those in real route guidance.
Virtual route guidance is repeated when you reach the fictitious destination
and always starts again from the starting point if it is interrupted.
If the starting point for demo mode has been defined manually in the
Navigation setup menu , virtual route guidance will start from this position.
If the vehicle is moved and the unit can determine its current location by GPS,
any manually entered starting point will be overwritten with the current
vehicle location ⇒ page 73.
When real route guidance is started following virtual route guidance in demo
mode, the unit first has to reorient itself. This may take some time, depending
on the number of satellites the unit can currently receive. Moving the vehicle
may speed up the reorientation process.
TRAFFICA10Previous
Next
º
A7
ºCongestion ahead
DemoNormal
MediaSystem2.1_EN.book Seite 72 Donnerstag, 29. April 2010 4:18 16

Telephone control (Phone)
80The columns below the Bluetooth
® symbol show the strength of the current
signal (strength of signal from the main mobile phone station).
To display the above, the mobile phone should accept the handsfree profile
1.5 .
Function buttons in the PHONE main menu : dial.
: address book.
: missed calls.
6): numbers dialled.
: calls received.
: voice mailbox number
7).
: accept or make a call.
8): make emergency call.
Setup menu Telephone (SETUP)The functions activated with the button are required for the
connection of a mobile phone or an external Bluetooth device ⇒page 77.6)This may vary depending upon the country.7)The number of the voice mailbox should be entered manually in the telephone setup
menu ⇒ page 80.8)The SOS or emergency call function is not displayed on all appliances and is not avail-
able in all countries even through the mobile phone operator.AAABACADAEAFSOS
Bluetooth settings
Function button: Result
: enter the voice mailbox number.: the telephone book entries in the radio and navigation
system will be updated from the mobile phone and SIM card. The proce-
dure may last several minutes.: sets the volume of phone calls.: Restore factory settings in telephone menu and delete
user profiles and numbers stored.
Enter voice mailboxLoad address bookTe leph on e vol umeFactory settings
MediaSystem2.1_EN.book Seite 80 Donnerstag, 29. April 2010 4:18 16

Telephone control (Phone)
84Using the telephoneAccepting, ending or rejecting a callWhen there is an incoming call, the phone number of the caller is displayed
on the radio and navigation screen.
If a phone number has been saved in the address book, the name stored
against the phone number is displayed instead of the number.
An incoming call can be accepted, ended or rejected using the radio and navi-
gation phone control system.•Press the function button to answer the call.•Press the function button to answer the call.•Press the function button to reject the call.Enter and call a phone number
It is possible to enter a phone number manually using the PHONE main menu.•Open the PHONE main menu by pressing the unit button.•In the PHONE main menu, press the function button ⇒page 79,
fig. 78.•Enter the required phone number in the input window by pressing the
characters.•After entering the complete phone number, press the function button
to make the call.Making a call from the address book•Open the address book in the PHONE main menu.•Select the required entry by turning the setting knob ⇒page 8, fig. 1 .•Press the setting knob to dial the number.•ALTERNATIVELY: Press the required entry to make the call.Making a call from the call list•Open the call list in the PHONE main menu.•Select the required entry in the list by turning the setting knob ⇒page 8,
fig. 1 .•Press the setting knob to dial the number.•ALTERNATIVELY: Press the required entry to make the call.•Alternatively: press the function button or the lower unit button to
make the call.
^^
Fig. 82 Enter a telephone
number.
PHONE
AA

A10
A10

MediaSystem2.1_EN.book Seite 84 Donnerstag, 29. April 2010 4:18 16

Index
96SD card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Searching for a point of interest . . . . . . . . . . . . 56
Setting knob (operation) . . . . . . . . . . . . . . . . . . 13
Settings (SETUP)
Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Factory settings . . . . . . . . . . . . . . . . . . . . . . . 88
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Volume distribution . . . . . . . . . . . . . . . . . . . 87
Settings SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . 87
SETUP DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
See: "Settings (SETUP)" . . . . . . . . . . . . . . . . 87
TRAFFIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Soft keys See: Function buttons . . . . . . . . . . . . . . . . . . 12
Sound (treble/mid-range/bass) . . . . . . . . . . . . . 87
Sound distribution (balance/fader) . . . . . . . . . . 87
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Special features Anti-theft code . . . . . . . . . . . . . . . . . . . . . . . . 10
AUX mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Display information . . . . . . . . . . . . . . . . . . . . 11
Radio coding . . . . . . . . . . . . . . . . . . . . . . . . . 10
Volume reduction . . . . . . . . . . . . . . . . . . . . . 10
Speed-dependent volume adjustment (GALA) . 87
Station buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Station search . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Stopover destination . . . . . . . . . . . . . . . . . . . . . 67
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switch-off delay (timeout) . . . . . . . . . . . . . . . . . 10
Switch-on volume . . . . . . . . . . . . . . . . . . . . . . . . 87
Symbols used in this manual . . . . . . . . . . . . . . . 12
System of units
Metric or imperial . . . . . . . . . . . . . . . . . . . . . 89
TTelephone usersDelete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Dynamic route guidance . . . . . . . . . . . . . . . . 70
TMC traffic reports . . . . . . . . . . . . . . . . . . . . . 71
Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TP (Traffic Programme) . . . . . . . . . . . . . . . . . 21, 22 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Traffic announcement (INFO) . . . . . . . . . . . . 23
Track repeat function . . . . . . . . . . . . . . . . . . . . . 39
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TRAFFIC TMC traffic reports . . . . . . . . . . . . . . . . . . . . . 71
Traffic announcement (INFO) . . . . . . . . . . . . . . . 23
Traffic congestion (TMC) . . . . . . . . . . . . . . . . . . . 70 Traffic news
See "TP (Traffic Programme)" . . . . . . . . . . . . 21
See: "TP (Traffic Programme)" . . . . . . . . . . . 22
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
UUnit buttons (hard keys) . . . . . . . . . . . . . . . . . . . 12 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unit overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
User entries, deleting See: Deleting . . . . . . . . . . . . . . . . . . . . . . . . . 88VVBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
VolumeNavigation announcements . . . . . . . . . . . . . 87
Parking distance warning system volume reduction . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Playback volume (AUX and MDI) . . . . . . . . . 41
See: Adjusting the base volume . . . . . . . . . 11
Speed-dependent volume adjustment (GALA) . 87
Switch-on volume . . . . . . . . . . . . . . . . . . . . . 87
Traffic announcements . . . . . . . . . . . . . . . . . 87
Volume distribution (balance/fader) . . . . . . . . . 87WWarnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Wireless communication interface . . . . . . . . . . 36
MediaSystem2.1_EN.book Seite 96 Donnerstag, 29. April 2010 4:18 16