2010 Seat Alhambra height adjustment

Safe driving 8
xCheck that the lights and turn signals operate correctly.
xCheck the tyre pressures (Ÿpage 323) and level of fuel (Ÿpage 293).
xEnsure there is good visibility through all the windows.
xMake sure that all objects and bags in the storage compartments, in the
luggage compartment and, where applicable, on the roof, are securely
fastened Ÿpage 13.
xEnsure there is nothing obstructing the free passage of the foot pedals.
xUse child retention systems appropriate for the child's body weight and
height Ÿpage 42.
xCorrectly adjust front seat, head rests and rear-view mirrors to suit your
height Ÿpage 10.
xWear close-fitting shoes which do not prevent you from using the pedals
correctly.
xThe driver's floor mat should be fixed to the floor, leaving the pedal area
unobstructed.
xBefore starting out, ensure you are correctly seated and remain in this
position throughout the journey. This applies to all passengers in the vehicle
Ÿpage 10.
xCorrectly fasten your seat belt before starting to drive and keep it securely
fastened throughout the journey. This applies to all passengers in the vehicle
Ÿpage 22.
xNever carry more passengers than the number of available seats and seat
belts in your vehicle.
xNever drive with impaired faculties (for example, due to medication,
alcohol or drugs).
xDo not allow yourself to be distracted from the traffic, for example, to reset
or switch on a menu, by other passengers or to answer a phone call.
xAlways try to adapt the speed of the vehicle and your style of driving to the
condition of the ground or the road and to weather and traffic conditions.
xObserve the highway code and speed limits.
xOn long journeys, rest at regular intervals (at least every two hours).
xIf carrying animals, make sure they are correctly restrained in accordance
with their weight and size.
WARNING
Always observe traffic regulations and speed limits and try to anticipate
traffic movements. Correctly anticipating traffic situations may mean the
difference between arriving safe and sound at your destination or having a
serious accident.
Note
Regular servicing of your vehicle not only helps to keep it in good working
order but also helps to ensure road safety. Therefore, please ensure the
vehicle is taken for service as indicated in the Maintenance Programme. If the
vehicle is subjected to hard use, it may require certain maintenance work
before the next service date. Hard use may involve frequent driving in traffic
jams, driving in dusty areas or frequent use of the tow-bar. For further infor-
mation, please refer to a SEAT dealer or specialised workshop.
Driving abroad
Check list
In some countries, certain safety regulations and requirements are in force
relating to exhaust gas emissions, which differ from the technical character-
istics of the vehicle. Before travelling abroad, SEAT recommends you consult
a SEAT dealer about the legal requirements and the following points:
xDoes the vehicle need technical modifications for driving abroad, for
example, adjustment of the headlamps?
xDoes the vehicle have all the tools, diagnostics equipment and spare
parts required for inspections and repairs?
xAre there any SEAT dealers in the destination country?

Safe driving11
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
xIf passengers on the rear seats are not sitting in an upright position, the
risk of severe injury due to incorrect positioning of the belt web increases.
WARNING
Incorrect seat adjustment may lead to accidents and severe injuries.
xOnly adjust the seats when the vehicle is stationary, as the seats could
move unexpectedly while the vehicle is in motion and you could lose
control of the vehicle. Furthermore, an incorrect position is adopted when
adjusting the seat.
xOnly adjust the height, backrest and forwards or backwards position of
the seat when there is nobody in the seat adjustment area.
xThere must be no objects blocking the seat adjustment area.
xOnly adjust the height, angle and longitudinal position of the rear seats
when nobody is in the way.
xThe seat adjustment and lock areas must be kept clean.
Danger of injuries due to an incorrect sitting position
If the seat belts are worn incorrectly or not at all, the risk of severe injuries
increases. Seat belts can provide optimal protection only if the belt web is
properly worn. The seat belt cannot offer its full protection if the belt web is
not positioned correctly. This could result in severe and even fatal injuries.
The risk of severe or fatal injuries is especially increased when a deploying
airbag strikes an occupant who has assumed an incorrect sitting position.
The driver is responsible for all passengers in the vehicle, particularly chil-
dren.
The following list shows just some examples of incorrect sitting positions
which can be dangerous to all occupants.Whenever the vehicle is in motion:
xNever stand in the vehicle.
xNever stand on the seats.
xNever kneel on the seats.
xNever tilt your backrest too far to the rear.
xNever lean against the dash panel.
xNever lie on the rear bench.
xNever sit on the front edge of a seat.
xNever sit sideways.
xNever lean out of a window.
xNever put your feet out of a window.
xNever put your feet on the dash panel.
xNever put your feet on the surface of a seat or backrest.
xNever travel in a footwell.
xNever sit on the armrests.
xNever travel on a seat without wearing the seat belt.
xNever carry any person in the luggage compartment.
WARNING
Every incorrect sitting position increases the risk of severe or fatal injuries
in the event of accidents or sudden braking or manoeuvres.
xAll passengers must assume the proper sitting position and be properly
belted in while travelling.
xOccupants in incorrect sitting positions, not wearing their seat belt or
too close to the airbag run the risk of suffering severe or fatal injuries,
particularly if the airbag deploys and hits an occupant sitting in an incor-
rect position.
WARNING (continued)

Seat belts 26
Adapting the position of the belt webbing to your size
The seat belt can be adapted using the following equipment:
xBelt height adjustment for the front seats.
xSeat height adjustment (front seats).
WARNING
An incorrectly worn seat belt web can cause severe injuries in the event of
an accident or sudden braking or manoeuvre.
xThe seat belt cannot provide optimum protection if it is not correctly
worn and the backrest is not tilted slightly backwards.
xThe seat belt itself or a loose seat belt can cause severe injuries if the
belt moves from hard areas of the body to soft areas (e.g. the stomach).
xThe shoulder part of the seat belt must lie on the centre of the shoulder,
never across the neck or the arm.
xThe seat belt must lie flat and fit comfortably on the torso
xThe lap part of the seat belt must lie across the pelvis, never across the
stomach. The seat belt must lie flat and fit comfortably on the pelvis Pull
the belt tight if necessary to take up any slack.
xFor pregnant women, the lap part of the seat belt must lie as low as
possible over the pelvis and always lie flat, “surrounding” the stomach.
xDo not twist the seat belt while it is fastened.
xNever pull the seat belt away from your body using your hand.
xDo not lie the seat belt across rigid or fragile objects, e.g. glasses, pens
or keys.
xNever use seat belt clips, retaining rings or similar instruments to alter
the position of the belt webbing.
Note
If you physical constitution prevents you from maintaining the correct posi-
tion of the belt webbing, contact a qualified workshop for help with any special devices to ensure the optimum protection of the seat belt and airbag.
SEAT recommends visiting a qualified workshop.
Belt height adjustment
Using the height adjusters for the front seats and the outer seats of the
second row, the position of the seat belts can be adjusted in the shoulder
area according to the height of the occupant:
xKeep the guide device pressed down in the direction of the arrow
Ÿfig. 15.
xMove the guide device up or down until the seat belt lies over the centre
of your shoulder Ÿpage 25, “Seat belt position”.
xRelease the guide device.
xPull the belt sharply to check that the device is engaged securely.
Fig. 15 Next to the front
seats: belt height
adjuster.

Airbag system33
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Airbag system
Description and function of the airbag
The airbag can protect vehicle occupants in the event of an accidents, cush-
ioning the movement of the occupants in the direction of the collision in
frontal and side accidents.
Deployed airbags fill with a propellant gas. This causes the airbag covers to
break and the airbags to deploy extremely quickly in their entire deployment
space within fractions of a second. When an occupant with the seat belt prop-
erly fastened puts pressure on the inflated airbag, the propellant gas escapes
to absorb the force of the impact and slow the movement. This reduces the
risk of severe or fatal injuries. Airbag deployment does not mean that other
types of injury such as swelling, bruising, burns and skin injuries can be ruled
out.
Airbags do not protect the arms or the lower part of the body.
The most important factors for triggering the airbag are the type of accident,
the angle of impact, the vehicle speed and the characteristics of the object
the vehicle hits. Therefore, airbags are not triggered every time the vehicle is
visibly damaged.
The airbag system is designed to be triggered in collisions with a severe
impact. The front, curtain, side and knee airbags may be triggered under
special circumstances. The scope of any visible damage to the vehicle is not
an indication of airbag deployment.
Airbags act in conjunction with three-point seat belts in the event of certain
accidents, when the vehicle deceleration rate is severe enough to trigger the
airbags. Airbags only deploy once and only under certain circumstances. Seat
belts remain present to offer protection in situations where airbags are not
triggered or where they have already deployed. For example, when a vehicle
hits another after an initial collision or is hit by another vehicle.The airbag system is an integral part of the car's passive safety system. The
airbag system can only work effectively when the occupants are wearing their
seat belts correctly and have adjusted the head restraints properly
’
Ÿpage 10.
Vehicle safety components
The following safety equipment makes up the vehicle safety design to reduce
the risk of severe and fatal injuries. Depending on the vehicle equipment,
some equipment may not be fitted in the vehicle or may not be available in
some markets.
xOptimised seat belts for all seats.
xBelt tension devices for the driver and front passenger and, where appli-
cable, on the outer seats of the second row of seats in combination with the
side airbags.
xFurthermore, belt tension limiters for the driver's and front passenger's
seat belt.
xBelt height adjustment for the front seats and, where applicable, the
outer seats of the second row of seats.
xSeat belt warning lamp
xFrontal airbags for driver and passenger.
xSide airbags for the driver, front passenger and, where applicable, the
outer seats of the second row of seats.
xLeft and right curtain airbags.
xOne airbag for the driver's knees.
xAirbag control lamp T.
xPASSENGER AIR BAG /&&  control lamp.
xControl units and sensors.
xHeight-adjustable head restraint optimised for rear collisions.
xAdjustable steering column.
xWhere applicable, mountings for child seats on the rear seats and on the
front passenger's seat.

Child safety47
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a The frontal airbag on the front passenger side is highly dangerous for a child.
The front passenger seat is life-threatening to a child if he or she is trans-
ported in a rear-facing child seat.
If a rear-facing child seat is secured to the front passenger seat, an inflating
airbag can strike it with such great force that severe or fatal injuries may result
Ÿ. Therefore, rear-facing child seats must never be used on the front
passenger seat when the front passenger airbag is enabled.
Only use a rear-facing child seat on the front passenger seat if the front
passenger airbag is disabled. When it is disabled, the yellow PASSENGER AIR
BAG
/&&  control lamp on the instrument panel will be lit Ÿpage 33. If you
cannot disable the front passenger airbag and it remains enabled, it is
forbidden to transport children on the front passenger seat Ÿ.
Things to note if using a child seat on the front passenger seat:
xThe front passenger airbag must be disabled ’ Ÿpage 36 if using a
rear-facing child seat.
xThe backrest of the front passenger seat must be upright.
xThe front passenger seat must be moved as far back as possible.
xThe backrest of the front passenger seat must be upright.
xThe seat belt height adjustment must be as high as possible.
Suitable child seats
The child seat must be authorised by the manufacturer especially for use on
a front passenger seat with a frontal or side airbag.
If the front passenger seat is equipped with retaining rings, the child seat can
be secured using the approved retaining system provided it is approved for
this type of vehicle in accordance with current regulations in the country in
question.
Universal seats for children in groups 0, 0+, 1, 2 or 3 according to the ECE-R
44 regulation.
WARNING
If a child seat is mounted on the front passenger seat, the risk of the child
sustaining severe or fatal injuries in the event of an accident increases.
Rear-facing child seats must never be mounted on the front passenger seat
when the front passenger airbag is enabled. This is life-threatening to the
child should the frontal airbag deploy, as the child seat would be struck by
the inflated airbag and thrown against the backrest.
WARNING
If, in exceptional circumstances, a child must be transported in a rear-
facing child seat on the front passenger seat, strictly observe the
following:
xAlways disable the front passenger airbag and leave it disabled.
xThe child seat must be approved by the manufacturer for use on a front
passenger seat with frontal and side airbag.
xFollow the installation instructions of the child seat manufacturer and
observe the warnings.
xMove the front passenger seat as far back as possible and adjust it to
its highest position to keep as far away as possible from the frontal airbag.
xMove the backrest to the upright position.
xThe seat belt height adjustment must be as high as possible.
xChildren must always be protected with an approved child restraint
system suited to their height and weight.
Use of the child seat on the rear seat
If a child seat is mounted on the rear seat, adapt the position of the front
passenger seat so that the child has enough space. Therefore, adapt the front

Child safety 48
passenger seat to the size of the child seat and the height of the child. Ensure
the passenger is in the correct position ’ Ÿpage 10.
Move the second and third row of seats fully back and lock them. Place the
seat backs in a vertical position and fold the armrests down.
ISOFIX child seats approved for rear seats
The rear seats are suitable for child seats with the ISOFIX system specially
designed for this type of vehicle in accordance with regulation ECE-R 44.
ISOFIX child seats are divided into “specific categories for the vehicle”,
“limited” or “semi-universal”.
Child seat manufacturers supply a list of vehicles with each ISOFIX seat,
which includes the models for which the ISOFIX child seat in question is
approved. If the vehicle is included in the manufacturer's list and the ISOFIX
child seat belongs to a seat category included in the list, then it can be used
in your vehicle. If necessary, contact the child seat manufacturer for an
updated list of vehicles.
WARNING
If child seats are fitted to all the seats in the second row then it is possible
that the seats of this row cannot be folded down from the third row of seats
in case of an accident. In case of an emergency, passengers in the third row
of seats will not be able to leave the vehicle or to help themselves.
xChild seats should not occupy all the seats of the second row if other
passengers are to occupy the third row of seats.
Securing child seats with the seat belt
Securing the child seat using the seat belt
xPlease read and observe the child seat manufacturer's handling instruc-
tions.
xPositioning the child seat on the seat according to the manufacturer's
instructions.
xThe seat belt height adjustment must be as high as possible.
Group (weight
category)ISOFIX child seat
categorySeat position on the
rear seats
Group 0: chil-
dren up to 10 kgEIUFa)
Group 0+: chil-
dren up to 13 kg
EIUFa)
DIUFa)
CIUFa)
Group 1: 9 to 18
kg
DIUFa)
CIUFa)
BIUFa)
B1IUFa)
AIUFa)
a)IUF: suitable for “universal” ISOFIX child seats authorised for use in this group.
Group (weight
category)ISOFIX child seat
categorySeat position on the
rear seats

Seats and storage compartments 134
Seats and storage compartments
Seat adjustment
Mechanical controls on the front seat
The controls are mirrored for the front right-hand seat.
Mechanically and electrically adjusted controls can be combined on the seat.
Fig. 81 Front left seat
controls.
fig. 81FunctionNecessary operations
Moving the head
restraint backwards or
forwards.Pull the lever and move the seat for-
wards. The front seat must be
engaged when the lever is released!
Adjusting the lumbar
support.Turn the lever.
Adjusting the backrest
angle.Turn the wheel.
Adjusting the seat
height.Pull the lever up or push down (sev-
eral times if necessary) from its home
position.
A1
A2
A3
A4

Seats and storage compartments135
Safety FirstOperating instructionsPractical tipsTe c h n i c a l D a t a
Electrical controls on the front seat
The controls are mirrored for the front right-hand seat.
Mechanically and electrically adjusted controls can be combined on the seat.
WARNING
Using the front electric seats in a careless or uncontrolled manner may lead
to severe injuries.
xThe front seats can also be electrically adjusted when the ignition is
switched off. Never leave children or disabled people alone in the vehicle.
xIn the event of an emergency, stop electrical adjustment by pressing
any button.
Caution
So as not the damage the electrical components of the front seats, do not
kneel on the seats or apply specific pressure to one point of the seat or back-
rest.
Note
It may not be possible to electrically adjust the seat if the vehicle battery is
very low.
Fig. 82 Adjusting the
front left seat forwards or
backwards, the height,
the seat angle and the
front seat backrest.
Fig. 83 Adjusting the
lumbar support.
page 135, fig. 82 Press the control in the direction of the arrow:
Move the seat backwards or forwards.
and Raise or lower the seat.
or Adjust the seat angle.
Forwards or
backwards.Adjust the backrest angle.
fig. 83 Press the corresponding area of the switch:
or Adjust the curve of the lumbar support.
or Adjust the height of the lumbar support.
AA
A1
A2A3
A2A3
AB
A1A2
A3A4