2010 PORSCHE PANAMERA water pump

· 44 ·· 45 ·
2
3
11112
13
1561059
84197
14
18
16
17
Performance | Engines
V6 engine
Panamera and Panamera 4: 220 kW (300 hp) at 6,200 rpm, 400 Nm at 3,750 rpm
New V6 engine.
The new Panamera and Panamera 4
models are equipped with an
ef ficient and light weight 3.6 -litre
naturally aspirated V6 engine
based on the V8 power unit. A
balance shaft reduces vibration
to ensure very smooth operation.
Direct fuel injection (DFI) and
VarioCam Plus are featured as
standard. The engine delivers
220 kW (300 hp) at 6,200 rpm.
Maximum torque of 400 Nm is
achieved at 3,750 rpm.
This impressive power output
enables the rear-wheel- drive
Panamera with manual gearbox
to accelerate from 0 to 62 mph
(100 km/ h) in only 6.8 seconds,
with a top speed of 162 mph
(261 km/ h). With the optional
Porsche Doppelkupplung (PDK),
these figures are an even more
impressive 6.3 seconds and
161 mph (259 km/ h). Thanks to
PDK and the active all-wheel drive
of Porsche Traction Management
(PTM), the Panamera 4 completes
the sprint in 6.1 seconds and
has a top speed of 159 mph
(257 km/ h).
1. Throt tle body/ E- Gas
2. Intake manifold
3. Intake manifold flap
4. Duplex chain
5. VarioCam Plus (vane - cell controller)
6. Intake camshaf t
7. Exhaust camshaf t
8. Valve
9. Spark plug
10. P i s t o n
11. High - pressure pump
12. High - pressure rail
13. Injector
14. Exhaust manifold
15. Water pump (behind)
16. Oil -water heat exchanger
17. Air-conditioning compressor
18. PDCC/power-steering pump
19. Poly-V belt
100
300 350
400
450
500 550 600
650
160
120
1
80
140
100
200 240 280 320 360
400
4401500
7500
2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 150 200
2501000
480
700
520
750
400 Nm
200 205
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
295
300
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
eff. red. Leistung [kW] eff. red. Drehmoment EWG [Nm]
Drehzahl [U/min]
Panamera V6 BDE 3,6l
Vollastkurve
Pemax. = 221 kW (300 PS) bei 6250 1/min
Md
max. = 400 Nm bei 4250 1/min
220 kW (300 hp)
Power (kW)
Engine speed (rpm)
Torque (Nm)

· 48 ·· 49 ·
1
2
3
4
56
78
9
101112
13
14
15
16
17
18
19
20
21
Performance | Engines
V8 twin-turbo engine.
The Panamera Turbo is powered
by a 4.8-litre V8 t win -turbo engine
with direct fuel injection (DFI),
VarioCam Plus and charge-air
cooling. It generates 368 kW
(500 hp) at 6,000 rpm and its
maximum torque of 700 Nm is
available bet ween 2,250 and
4,500 rpm. With a top speed of
188 mph (303 km/ h), it races
from 0 to 62 mph (100 km/ h) in
4.2 seconds. Using the Launch
Control function of the Sport
Chrono Package Turbo (p. 76),
the clock stops even sooner at
4.0 seconds.
V8 t win -turbo engine
Panamera Turbo: 368 kW (500 hp) at 6,000 rpm,
700 Nm bet ween 2,250 and 4,500 rpm 1. Intake manifold
2. High - pressure pump
3. VarioCam Plus (vane - cell controller)
4. Duplex chain
5. High - pressure rail
6. Injector (underneath)
7. VarioCam Plus (switch tappets with
integrated valve clearance compensation)
8. Intake camshaf t
9. Exhaust camshaf t
10. Valve
11. Piston (underneath)
12. Spark plug
13. Exhaust manifold
14. Turbocharger
15. Oil filter
16. Oil - water heat exchanger
17. Air-conditioning compressor
18. PDCC/power-steering pump
19. Water pump (underneath)
20. Poly-V belt
21. Throt tle body/ E- Gas
100
300 350
400
450
500 550 600
650
160
120
1
80
140
100
200 240 280 320 360
400
4401500
7500
2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 150 200
2501000
480
700
520
750
368 kW (500 hp)
700 Nm
Power (kW)
Engine speed (rpm)
Torque (Nm)

· 94 ·· 95 ·
In models with the V8 engine,
exhaust gas cleaning is supported
by an air injection system. A com-
pressor pumps extra air into the
exhaust tract during the cataly tic
converter warm-up phase for
faster heating and, therefore,
lower emissions.
Other measures for improving fuel
economy are the Auto start/stop
function (p. 50) and electrical
system recuperation, whereby the
vehicle bat tery is charged pre-
dominantly under braking. Under
acceleration, on the other hand,
the charging current of the regu -
lated alternator is reduced so that
the engine does not need to work
as hard to charge the bat tery.
Lightweight construction and
recycling.
A fundamental objective in the
development of any Porsche is
intelligent lightweight construction.
For both economical and ecologi -
cal reasons. This forms the basis
for low fuel consumption values in conjunction with outstanding
performance. It is economical
thanks to the high proportion of
aluminium cast alloys, plastics
and super-high-strength sheet
steel used. This is substantially
more stable and lighter than

conventional steel. The Panamera
models have a bodyshell with a
light weight-metal content of 23 %.
For example, the bonnet, doors,
front wings and rear lid are made
of aluminium, which saves on
weight and has a positive ef fect
on the environmental balance:
according to eco balance sheets,
the extra energy used and the
higher emissions incurred in the
manufacturing of aluminium
are more than compensated by
the savings on fuel af ter only a
relatively short distance.
It is also responsible because all
materials used are meticulously
selected. We use only innovative
and environmentally friendly com -
ponents. All light weight materials
are easily recyclable and each
material is labelled to facilitate its
separation for recycling. The reduction in the number of plastic
variants helps to ensure more
efficient recycling. Recycled plas
-
tics are used where they meet our
exacting technical requirements
In all, the Panamera is approxi -
mately 95 % recyclable.
In addition, Porsche uses only
environmentally friendly water-
based paints, thus reducing
the need for solvents both in pro -
duction and in the workshop.
The Panamera is also absolutely
free of asbestos, CFCs and
components manufactured using
CFCs because, here at Porsche,
environmental protection does
not begin at the end of a vehicle’s
life. It starts at the planning and
development stage.
Balance | Environment