2010 PORSCHE 911 GT3 headlight bulb

[x] Cancel search: headlight bulb

Page 11 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual 10
Table of Contents Exercise Extreme Caution when Working 
on your Vehicle ........................................... 157
Coolant Level ............................................. 158
Engine Oil..

Page 76 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual Operation, Safety
75
Turn Signal / Headlight Dimmer /
Parking light / Flasher Lever Turn signals, low beam and high beam are ready 
for operation when the ignition is on. 
1  –  Turn signal left
2

Page 150 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual Warnings
149
Lights on Low beam/side marker lamps on
Parking light on Left/right parking light on
Check left/right dipped beam (low 
beam)
also applies to: 
high beam, side indicator light, 
reversing

Page 183 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual 182
Practical Tips, Emergency Service
Practical Tips, Emergency ServiceExercise Extreme Caution when Working 
on your Vehicle ........................................... 183
Tires/Wheels .............

Page 220 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual Practical Tips, Emergency Service
219
Bulb chart
Ty p e ,  r a t i n g
Halogen low beam
H7, 55W
Low beam with Bi-Xenon headlight Philips, D2S 35W
Halogen high beam
H9, 65W
Additional high beam with Bi

Page 223 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual 222
Practical Tips, Emergency Service Halogen headlights:
Changing bulb for low beam
1. Pull off plug A.
2. Disengage fixing loop B.
3. Replace defective bulb.
When doing so, ensure bulb is seated pro

Page 224 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual Practical Tips, Emergency Service
223
Bi-Xenon headlight (without cornering light):
Changing bulb for additional high beam
Halogen headlights:
Changing bulb for low beam
1. Turn the bulb holder.
Turn

Page 225 of 251

PORSCHE 911 GT3 2010 5.G Owners Manual 224
Practical Tips, Emergency Service Bi-Xenon headlight (with cornering light):
Changing bulb for low beam and high beam
1. Undo the 3 screws on the control unit and 
remove the control unit.2. Turn
Page:   1-8 9-16 next >