2010 Peugeot Boxer Dag change time
[x] Cancel search: change timePage 32 of 167
Instruments and controls
3 5
2
READY TO SET OFF
SERVICE INDICATOR
F o r a f e w s e c o n d s a f t e r t h e i g n i t i o n i s
s w i t c h e d o n , t h e s p a n n e r s y m b o l i s i n g t h e
s e r v i c e i n d i c a t o r c o m e s o n : t h e s c r e e n
i n f o r m s y o u w h e n t h e n e x t s e r v i c e i s d u e ,
i n a c c o r d a n c e w i t h t h e m a n u f a c t u r e r ' s
s e r v i c i n g s c h e d u l e i n d i c a t e d i n t h e s e r v i c i n g
b o o k l e t . T h i s i n f o r m a t i o n i s d e t e r m i n e d i n
r e l a t i o n t o t h e d i s t a n c e t r a v e l l e d s i n c e t h e
previous service.
LIGHTING RHEOSTAT
T h e r h e o s t a t i s a c t i v e w h e n t h e l i g h t i n g i s o n .
A f t e r a f e w s e c o n d s , t h e d i s p l a y r e t u r n s t o
i t s u s u a l f u n c t i o n s .
U s e t h e s e c o n t r o l s t o a d j u s t t h e
b r i g h t n e s s o f t h e i n s t r u m e n t p a n e l .
There are 8 levels.
A long press returns you to the main menu.
R e f e r t o " M o d e " s e c t i o n o f c h a p t e r 4 .
Deterioration of the engine oil (100 and 120 bhp engines)
T h e " O i l L i f e " f u n c t i o n d e t e r m i n e s t h e
s e r v i c e i n t e r v a l , b e t w e e n 2 0 , 0 0 0 m i l e s
( 3 0 , 0 0 0 k m ) a n d 3 0 , 0 0 0 m i l e s ( 4 5 , 0 0 0 k m ) ,
d e p e n d i n g o n t h e w e a r o f t h e e n g i n e o i l .
T h e e n g i n e c o n t r o l u n i t t e s t s t h e d e g r e e o f
w e a r o f t h e e n g i n e o i l . R e f e r t o t h e l i s t o f c h e c k s i n t h e
s e r v i c i n g b o o k l e t w h i c h w a s g i v e n t o
y o u o n h a n d o v e r o f t h e v e h i c l e .
Reminder of servicing information
A t a n y t i m e , t o a c c e s s t h e s e r v i c e i n d i c a t o r ,
p r e s s b r i e f l y o n t h e M O D E b u t t o n .
U s e t h e u p / d o w n a r r o w s t o s e e t h e
s c h e d u l i n g a n d e n g i n e o i l w e a r i n f o r m a t i o n .
P r e s s i n g t h e M O D E b u t t o n a g a i n a l l o w s y o u
t o r e t u r n t o t h e v a r i o u s d i s p l a y m e n u s .
Menu... Choose...
Allows you
to...
12
Service Service
( M i l e s / k m
b e f o r e o i l
c h a n g e ) Display the
d i s t a n c e
remaining
b e f o r e t h e
n e x t o i l
change.
Oil Display the
oil level.
Resetting to zero
T h e s t o p p i n g o f t h e p e r m a n e n t f l a s h i n g o f
t h e i n d i c a t o r i s c a r r i e d o u t b y a n a u t h o r i s e d
r e p a i r e r w i t h a d i a g n o s t i c t o o l .
I n t h i s c a s e , y o u r v e h i c l e m u s t b e s e r v i c e d
a s s o o n a s p o s s i b l e ( w i t h i n a p p r o x i m a t e l y
6 0 0 m i l e s / 1 0 0 0 k m ) .
T h e f u n c t i o n m u s t b e r e s e t t o z e r o e v e r y
t i m e t h e e n g i n e o i l i s c h a n g e d .
Y o u a r e w a r n e d b y t h e f l a s h i n g o f
t h e e n g i n e o i l p r e s s u r e w a r n i n g
l a m p a n d a m e s s a g e o n t h e
instrument panel every time you
s t a r t t h e e n g i n e , i f y o u r v e h i c l e i s f i t t e d w i t h
t h i s f u n c t i o n .
Page 38 of 167
40
Steering mounted controls
LIGHTING CONTROL STALK
Selection is by rotation of the white mark on
the ring.
All lighting off
Direction indicators(green flashing)
Left: downwards.
Right: upwards.
STEERING MOUNTED CONTROLS
Sidelamps on
Dipped/main beam headlamps on
Dipped/main beam headlamps change
Pull the control stalk fully towards you.
Headlamp flash
Pull the control stalk towards you,
regardless of the position of the ring.
Front foglamps
Rear foglamps
If your vehicle is fitted with foglamps, these
operate with the sidelamps, the dipped or
main beam headlamps.
Press one of these controls to switch on the
lamps. The foglamps should only be used in
fog or when snow is falling.
In clear weather or in rain, both day and
night, rear foglamps dazzle and their use is
prohibited.
Do not forget to switch them off when they
are no longer necessary.
"Motorway" function
Pull the lever towards the steering wheel
with a press, without passing the point
of resistance of the lighting stalk; the
corresponding direction indicators will flash
five times.
Page 41 of 167
43
3
EASE OF USE AND COMFORT
Steering wheel controls
WIPER STALK Slow continuous wiping: 2 notches downwards.
Do not cover the rain sensor, located at
the top centre of the windscreen.
When washing the vehicle, switch off the
ignition or deactivate the automatic rain
sensitive wipers.
Screenwash and headlamp wash
Pull the stalk towards you, the wash-wipe
is accompanied by a timed operation the
wipers.
The headlamp wash is linked with the
screenwash, it is triggered if the dipped
beam headlamps are on.
Windscreen wipers
Wiping is only active when the ignition key is
in the RUNNING position.
The stalk has five different positions:
Wipers off.
Intermittent wiping:
1 notch downwards.
In this position, four speeds can be
selected by turning the ring:
- very slow intermittent,
- slow intermittent,
- intermittent,
- fast intermittent.
Automatic rain sensitive windscreen wipers
If your vehicle is fitted with this system, the
wiping speed is adapted automatically to the
intensity of the rainfall.
Automatic wiping: 1 notch downwards.
This is confirmed by one wipe. Must be
reactivated each time the ignition is
switched on.
In this position, the sensitivity of the rain
sensor can be increased by turning the ring.
Good practice
Check that the windscreen wiper blades can
operate freely when using the wipers in icy
weather.
Use the step in the front bumper, to remove
any accumulation of snow at the base of the
windscreen and on the blades.
To change the blades, refer to the
"Changing a wiper blade" section of
chapter 8.
To top up the levels, refer to the
"Levels" section of chapter 7.
Fast continuous wiping: 3 notches
downwards.
Single wipe, pull the control towards the
steering wheel.
Page 74 of 167
kmC I T Y
Parking assistance
76
AUDIBLE REAR PARKING SENSORS
If fitted on your vehicle, the system consists
of four proximity sensors, installed in the
rear bumper.
They detect any obstacle: person, vehicle,
tree, fence, behind the vehicle during the
manoeuvre.
However, objects the size or thickness of
which are detected at the beginning of the
manoeuvre will no longer be detected at the
end of the manoeuvre: blind spots between
and below the sensors. Examples: stake,
roadworks cone or pavement post. Engage reverse gear
The proximity information is indicated by an
audible signal which becomes more rapid as
the vehicle approaches the obstacle.
When the distance between the rear of
the vehicle and the obstacle is less than
approximately thirty centimetres, the audible
signal becomes continuous.
The system cannot, in any circumstances, take
the place of the vigilance and responsibility of
the driver.
Stop the assistance
Change to neutral.
Operating fault
If this warning lamp comes on on
the instrument panel, contact a
PEUGEOT dealer. If your vehicle is fitted
with this screen, a
message appears.
Good practice
In bad weather or in winter, ensure that the
sensors are not covered with mud, ice or
snow.
Page 76 of 167
Reversing camera
78 Initial settings With reverse gear not engaged,
press and hold the ON/OFF button
for approximately 3 seconds. The
b u t t o n fl a s h e s t w i c e t o c o n fi r m t h e
reinitialisation.
Alarm display on the screen
In the ON position, information in text
format accompanies the manoeuvre and is
displayed on the screen:
- each time reverse gear is engaged, a message appears before the first view is
transmitted,
- at 11 mph (18 km/h) in reverse gear, the rear view disappears and the
screen switches to "Stand by". The view
appears again when the vehicle returns
to a speed below 9 mph (15 km/h).
Change of language
With reverse gear not engaged, press
the ON/OFF button and any other button
simultaneously.
Scroll through the languages by pressing
ON/OFF.
When the language has been selected, wait
approximately 3 seconds for it to be stored. Good practice
When vehicle conditions are optimum
(position on the road, loading level) the
maximum area of visibility covered by the
camera has a field depth approximately 3 m
long and 5.5 m wide.
The area of visibility may vary depending on
the external weather conditions (brightness,
rain, snow, fog, ...), the load in the vehicle
and the position of the vehicle on the road.
Please store the screen in its housing when
no longer in use.
When cleaning the camera and the screen,
avoid using a detergent or a tool which may
scratch the glass.
Use a non-abrasive cloth or a small brush.
Following a collision, if the screen glass has
cracked and allows liquid crystal to flow out:
do not touch it.
If you have come into contact with it, quickly
wash the contaminated part of the body with
soapy water.
Contact a PEUGEOT dealer to have the
screen repaired.
Page 130 of 167
Checks
CHECKS
Air filter and passenger compartment filter
A clogged passenger compartment filter
may reduce the performance of the
air conditioning system and generate
undesirable odours. The replacement
intervals for these components are indicated
in the servicing booklet.
Depending on the environment (dusty
atmosphere...) and the use of the vehicle
(urban driving...), change them twice as
often if necessary, refer to the "Under the
bonnet" section of chapter 7.
Manual gearbox
Have the level checked in accordance with
the manufacturer's servicing schedule. To check the main levels and certain
components, in accordance with the
manufacturer's servicing schedule, refer to
the pages of the servicing booklet which
correspond to your vehicle's engine.
Only use products recommended by
PEUGEOT or products of equivalent quality
and specification.
In order to optimise the operation of units as
important as the braking system, PEUGEOT
selects and offers specific products.
In order to avoid damaging the electrical
units, high pressure washing to clean the
engine compartment is strictly prohibited.
Parking brake
Where the parking brake travel is too great
or there is a reduction in the performance
of the system, the parking brake should be
adjusted, even between services.
Have the system checked by a PEUGEOT
dealer.
Bleeding the water contained in the Diesel filter
If this warning lamp comes on,
bleed the filter, otherwise bleed
regularly each time the engine oil
is changed.
To drain the water out, unscrew the bleed
screw or the water in Diesel sensor, located
at the base of the filter. Leave open until
all of the water has been drained out. Then
tighten the bleed screw or the water sensor.
HDi engines use advanced technology. All
work requires a special qualification which is
guaranteed by a PEUGEOT dealer.
Battery
At the start of winter, have your battery
checked by a PEUGEOT dealer.
Brake pads
Brake pad wear depends on the style of
driving, in particular for vehicles which are
used in town, over short distances. It may
be necessary to check the thickness of the
pads, even between services.
Unless there is a leak on the system, a drop
in the brake fluid level indicates that the
brake pads are worn.
Brake disc/drum wear status
For any information relating to checking
the brake disc/drum wear status, contact a
PEUGEOT dealer.
Oil filter
Change the filter regularly, in accordance
with the servicing schedule.
Page 135 of 167
Changing a wheel
4. OPERATING PROCEDURE
- Remove the trim using the screwdriver F
as a lever.
-
Release the bolts using the wheelbrace E .
- Position the jack C at one of the four
locations provided on the underbody
near the wheels. 3. SPARE WHEEL
The spare wheel retaining bolt is located on
the rear right side.
- Turn the bolt using the socket A and the
ratchet wrench B to release the wheel.
- Turn to the locking point, indicated by an increase in the force required for the
manoeuvre. - Take out the spare wheel using the
wrench.
- Unscrew the handle G and remove the
support H .
- Release the spare wheel and place it near the wheel to be changed. If you have a retractable foor board, the jack
must be positioned at 45°.
- Extend the jack using the ratchet
wrench B until the wheel is a few
centimetres off the ground.
- Unscrew the bolts fully and change the wheel.