75
4
TECHNOLOGY ON BOARD
Mode
Menu… Press... Sub-menu… Press... Select…
Confirm
and exit
Enables you to...
8 Measurement
unit (Unit) Distance
Km
Select the distance display unit.
Miles
Fuel
onsumption km/l
Select the fuel consumption
display unit.
l/100 km
9 Languages List of
languages
available Select the display language.
10 Volume of
announcements
(Buzz) Increase Increase/decrease the volume
of the announcements or of the
audible warning.
Decrease
11 Volume of
the buttons Increase
Increase/decrease the volume of
the buttons.
Decrease
12 Service Service
(Miles/km before
oil change) Display the miles/kilometres
remaining before the next oil
change.
Oil Display the oil level.
13 Passenger
airbag
(BAG P) ON
Yes
Activate the passenger airbag.
No
OFF Yes
Deactivate the passenger
airbag.
No
14 Exit from
menu Exit from the menu. Press the
arrow at the bottom to go to the
first menu.
Reversing camera
78 Initial settings With reverse gear not engaged,
press and hold the ON/OFF button
for approximately 3 seconds. The
b u t t o n fl a s h e s t w i c e t o c o n fi r m t h e
reinitialisation.
Alarm display on the screen
In the ON position, information in text
format accompanies the manoeuvre and is
displayed on the screen:
- each time reverse gear is engaged, a message appears before the first view is
transmitted,
- at 11 mph (18 km/h) in reverse gear, the rear view disappears and the
screen switches to "Stand by". The view
appears again when the vehicle returns
to a speed below 9 mph (15 km/h).
Change of language
With reverse gear not engaged, press
the ON/OFF button and any other button
simultaneously.
Scroll through the languages by pressing
ON/OFF.
When the language has been selected, wait
approximately 3 seconds for it to be stored. Good practice
When vehicle conditions are optimum
(position on the road, loading level) the
maximum area of visibility covered by the
camera has a field depth approximately 3 m
long and 5.5 m wide.
The area of visibility may vary depending on
the external weather conditions (brightness,
rain, snow, fog, ...), the load in the vehicle
and the position of the vehicle on the road.
Please store the screen in its housing when
no longer in use.
When cleaning the camera and the screen,
avoid using a detergent or a tool which may
scratch the glass.
Use a non-abrasive cloth or a small brush.
Following a collision, if the screen glass has
cracked and allows liquid crystal to flow out:
do not touch it.
If you have come into contact with it, quickly
wash the contaminated part of the body with
soapy water.
Contact a PEUGEOT dealer to have the
screen repaired.
