2010 NISSAN ALTIMA HYBRID engine oil

[x] Cancel search: engine oil

Page 343 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual 8 Maintenance and do-it-yourself
Maintenance requirements..........................8-2
General maintenance ..............................8-2
Explanation of general maintenance items .........8-2
Maint

Page 347 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual Seat beltsCheck that all parts of the seat belt
system (for example, buckles, anchors, adjusters
and retractors) operate properly and smoothly,
and are installed securely. Check the belt web-
bing for

Page 349 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual ●Never get under the vehicle while it is
supported only by a jack. If it is neces-
sary to work under the vehicle, support
it with safety stands.
● Keep smoking materials, flame and
sparks away fr

Page 350 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual 1. Brake fluid reservoir
2. Engine oil filler cap
3. Air cleaner
4. Fuse/Fusible link box/Jump-startlocation
5. Fuse box
6. Inverter coolant reservoir
7. Engine oil dipstick
8. Radiator cap
9. Drive b

Page 353 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual CHECKING INVERTER COOLANT
LEVEL
Check the coolant levelin the reservoir when
the engine and inverter are cold. If the cool-
ant level is below the MIN level
B, add coolant to
the MAX level
A.
If the

Page 354 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual 5. Remove the dipstick again and check the oillevel. It should be between the H (High) and
L (Low) marks
B. This is the normal oper-
ating oil level range. If the oil level is below
the L (Low) mark

Page 355 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual 5. Remove the drain plugBwith a wrench by
turning it counterclockwise and completely
drain the oil.
If the oil filter is to be changed, remove and
replace it at this time. See “Changing engine
oil

Page 356 of 422

NISSAN ALTIMA HYBRID 2010 L32A / 4.G Owners Manual CAUTION
Be careful not to burn yourself. The engine
oil may be hot.5. Wipe the engine oil filter sealing surface with a clean rag.
CAUTION
Be sure to remove any old gasket material
remaining on the se
Page:   < prev 1-8 9-16 17-24 25-32 next >