2010 NISSAN ALTIMA HYBRID display

2. After the tone sounds, speak a command.
To set the destination from a street address:
“Navigation” “Address” (Standard mode)
“Address” (Alternate command mode)
INFO:
When using a voice command to set a street
name, the complete street name is recom-
mended to be stated.
Examples:
Correct input — North Elm Street
East Jefferson Boulevard
Incorrect input — Elm Street
East Jefferson
FINDING A PLACE
There are 3 methods to set the destination to
places: typing the name, choosing a category or
selecting a Zagatreviewed location. To help
improve searching, different start points can be
chosen to search from such as Near Current
Location, Near the Destination, or a particular
city.
Finding a nearby place
1. Press DEST.
2. Select “Places”.3. Select the preferred nearby category from
the list.
A list screen is displayed.
INFO:
Select “Customize Nearby Places” to customize
the nearby places list to show categories that
are frequently used.
NDE0012NDE0013
Setting a destination4-7

4. Select the preferred destination from the
list. The position of the selected location is
displayed in the preview on the right side of
the screen.
INFO:
●A maximum of 100 facilities can be displayed
on the list screen.
●If the suggested route is already set, the sys-
tem displays only the facilities located along
the route.5. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.INFO:
If there is a route already set, the new selected
location becomes a waypoint.Other settings:
The destination can be set by touching the cur-
rent or scrolled location map screen and select-
ing “Nearby Places”.INFO:
Voice command
1. Press
located on the steering wheel
switch.
2. After the tone sounds, speak a command.
To display the nearby category list and se-
lect the destination from it:
“Navigation” “Places” (Standard mode)
“Places” (Alternate command mode)
NDE0014NDE0015NDE0019
4-8Setting a destination

Searching by other methods
1. Press DEST.
2. Select “Places”.3. Select “All Categories or Name”. 4. Set the narrowing down conditions for the
landmarks.INFO:
Select “Change Region” to change the region. A
screen for selecting a region is displayed.
NDE0012NDE0017NDE0018
Setting a destination4-9

INFO:
If “Select a City” is selected, a city name input
screen is displayed. Specify the city to search for
before narrowing down the categories.
●Enter the city name, select “List”. To select the
city from the recently set destinations, select
“Last 5 Cities” instead of entering the name.
●Select the preferred city from the list .5. Select the main category from the list.INFO:
To select the category by directly inputting the
category name, select “Category Search”. The
category name input screen is displayed.
NDE0019NDE0020NDE0021
4-10Setting a destination

6. Select the subcategory.
INFO:
Subcategories may not exist depending on the
category that is selected.7. Enter the name of the destination facility
and select “List”.
The facility list is displayed.
INFO:
●It is not necessary to enter the facility name
completely. It is also possible to display the
list screen only by selecting “List” without en-
tering the facility name .
●The number of narrowed down points are dis-
played in the “Matches” column.
●Up to two keywords (part of the facility name)
can be entered by selecting “AND Search” af-
ter entering the first facility name.
INFO:
The facility name can also be entered directly by
selecting “Choose Name” on the main category
list screen.
NDE0022NDE0023NDE0024
Setting a destination4-11

8. Select the preferred destination from the
list.
INFO:
●By selecting “Sort”, options can be sorted
from “By Name” or “By Distance”. When se-
lecting “By Distance”, the position of the se-
lected location is displayed in the preview on
the right side of the screen.
●In some cases, when a facility name has been
entered, the number of matching destinations
in the “Matches” column may be different from
the number displayed on the list screen. If this
occurs, enter more characters to further re-
duce the number of matches.
●The search conditions can be changed by se-
lecting “Refine”.9. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Searching for a restaurant by Zagat
rating
1. Press DEST.
2. Select “Places”.
NDE0025NDE0026NDE0012
4-12Setting a destination

3. Select “ZAGAT”. 4. Select the preferred state. A list screen is
displayed.5. Select the preferred city. A list screen is
displayed.
NDE0027NDE0028NDE0029
Setting a destination4-13

Searching for a restaurant:
1. Select “RESTAURANT”. A list screen is
displayed.2. Select the preferred category. A list screen
is displayed.3. Select the preferred sorting order. A list
screen is displayed.
NDE0030NDE0031NDE0032
4-14Setting a destination