2010 MITSUBISHI OUTLANDER clock

[x] Cancel search: clock

Page 663 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 7-66 Vehicle care and maintenance
7
3. While holding down the tab (D), pull out the socket (E). 4. Turn the bulb (F) counterclockwise to remove it.
BK0115300US.book  66 ページ  2009年7

Page 665 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 7-68 Vehicle care and maintenance
7
2. Turn the socket and bulb assembly counterclockwise to
remove it.NOTE
The tail and stop light uses an LED instead of the bulb.
Check with an authorized Mitsubish

Page 667 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 7-70 Vehicle care and maintenance
7
3. Turn the socket (A) counterclockwise to remove it. 4. Pull the bulb out of the socket.
5. To install the bulb, perform the removal steps in reverse.
BK0115300US.

Page 669 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 7-72 Vehicle care and maintenance
7
4. Remove the socket and bulb assembly (C) together by
turning it counterclockwise, and then remove the bulb by
pulling it out.
5. To install the bulb, perform the

Page 675 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 7-78 Vehicle care and maintenance
7
3. To install the bulb, perform the removal steps in reverse.NOTE
Before replacing the bulb, put the dome light (rear)/cargo
room light switch into the “OFF” p

Page 705 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual Alphabetical index
2Service brake 3-127
Warning lights 3-208
Break-in recommendations 3-2
Bulb capacity 7-51
C
California Perchlorate Materials Requirements 1-8
Capacities 9-11
Card holder 3-274
Cargo
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48