2010 MITSUBISHI LANCER fuel

Outline of the System 1-5
Introduction
Outline of the System
System Male or female voice guidance is available in 3
languages.
(English, French, Spanish)
 Trip information such as average speed, average fuel
economy, and instant fuel economy can be viewed. (page 9-5) Detailed settings can be made for vehicle equipment. (page 10-7) The vehicle maintenance timing can be managed
with the maintenance function.
(page 9-9)
 Environmental information such as the outside
air temperature, altitude, and air pressure can be
viewed.
(page 9-8)
 A special day or anniversary can be managed with
the calendar function.
(page 9-1)
 DVDs can be played.
(page 8-1)
 Music CDs can be recorded and played using the
Music Server.
(page 7-1)
Easy Operation Setting The touch panel enables easy operation.Destination Setting Addresses and nearby POIs can be easily searched
for and set as the destination.
(page 3-2)
 A route can be set for returning home.
(page 3-7)
 A new destination can be set from the 20
destinations that have been previously set. (page 3-7)
Display Guidance POI icons can be displayed on the map. There are
43 POI icon types.
(page 10-10)
 The menu and map colors can be changed. (page 10-6),(page 10-11) Markings can be displayed on the road on which the
vehicle is being driven.
(page 10-11)
Routing Detour routes can be set with speci ed distances or
streets to avoid.
(page 4-3)
 A route can be selected from 3 routes that have
different calculation conditions.
(page 4-4)
 Areas to avoid can be set.
(page 10-16)
Voice Guidance Guidance is given for the required information at the
optimum time.
(page 2-12)
 A male or female voice can be selected.
(page 10-5)
Vehicle information display (page 9-5) You can check or set driving information.
 You can check distance to empty, distance driven
after refueling, and driving time.






 


Trip 9-5
Information
Trip
Trip information can be viewed and set.
1 Press the [INFO] key, and touch
[Trip]
eng_a140

eng_a208
The trip screen is displayed.
The average speed, Average Fuel Economy, and
Instant Fuel Economy information can be viewed.NOTE Touch [Graph] to view
the average speed and
average fuel economy
as a graph, measured
in 5-minute units.
eng_a211
 Touch [Manual] to change the reset mode to “Manual
Reset Mode”.
>>> “Reset Mode” (page 9-5)
2 Touch [
]

eng_a209
The 2/3 trip screen is displayed.
The distance to empty, distance driven after refueling
and driving time can be viewed. 3 Touch [
]

eng_a210
The 3/3 trip screen is displayed.
The lap time can be measured. >>> “Lap Time” (page 9-6)
Reset Mode
Two reset modes are available:
- Auto Reset Mode automatically resets
the average speed and average fuel
economy, four hours after the ignition
switch is turned OFF.
- In Manual Reset Mode, you can reset
the items when desired.
Changing the Reset Mode
1 Display the 1/3 Trip screen
2 Touch [Manual]
eng_a208

eng_a212
“Auto Reset Mode” is changed to “Manual Reset
Mode”.










Trip 9-6NOTE Touch [Auto] to return to “Auto Reset Mode”.
 In “Manual Reset Mode” or “Auto Reset Mode”,
touch [Reset] to reset the average speed and
average fuel economy.
Driving Distance and Time
The distance to empty, distance driven
after refueling and driving time can be
viewed on the 2/3 Trip screen.
Distance to EmptyThe displayed distance to empty is calculated from
the current remaining fuel and the recent average fuel
economy.Distance Driven After RefuelingDisplays automatically the distance driven after
refueling.
It is reset when the vehicle is refueled.NOTE If the amount of fuel added is less than approximately
2.6 gallons (10 litres), automatic reset will not be
performed. Press [Refuel] to reset.Driving TimeMeasures the time from when the ignition switch is
turned “ON” to when it is turned “OFF”.
It is reset when the ignition switch is turned from “OFF”
to “ON”.
Lap Time
Time, distance, speed and mileage can be
measured.
1 Display the 3/3 Trip screen
2 Touch [Start]
eng_a210

Total Line
eng_a213
The measurement starts. At this time, the speed and
mileage are being measured, so they are not displayed. 3 Touch [Lap]

eng_a214
The current measurement results are displayed in “A”.
NOTE Touch [Lap] again
and the measurement
results displayed in
“A” are moved to
“B”, and the current
measurement results
are displayed in “A”.
eng_a215
4 Touch [Stop]

eng_a216
The measurements stop and the measurement results
are displayed in the total line.NOTE Touch [Start] to restart the measurements from
where they stopped.
 The measurements stop if the ignition switch is
turned “OFF” during measurement. If this happens,
the measurements restart when the ignition switch is
turned “ON”. 5 Touch [Reset]