been carried out. Resetting the ASSYST
service
interval display without performing
the corresponding maintenance service
may result in engine damage and/or
damage to other vehicle parts that are not
covered by the limited warranty for new
vehicles. Tire rotation
Your vehicle's tires are a critical component
to overall vehicle performance and vehicle
stability. The useful life of tires will vary and
is proportional to tire type, speed rating,
ambient
conditions, tire loading, tire inflation
pressure, road surfaces, and individual
driving style. We therefore recommend
regularly checking the tires for wear and
correct tire pressure, and - if the tire
configuration allows - that the tires are
rotated regularly.
Tires can only be rotated on vehicles with the
same tire size on the front and rear axles.
If your vehicle's tire configuration allows for
tire rotation, tire rotation should be
performed in accordance with the
recommended intervals, or sooner at first
signs of irregular (uneven) tread wear. Tire
rotation recommendations will likely
necessitate a tire rotation at least at every Oil
Service Plus/maintenance service.
Single tires at rear If your vehicle is equipped with the same tire
dimensions,
tires can be rotated by observing
a front-to-rear rotation pattern that will
maintain the intended rotation (spinning)
direction of the tire (on unidirectional tires, an
arrow on the sidewall indicates the intended
rotation or spinning direction of the tire).
Double tires at the rear If your vehicle is fitted with tires of the same
size,
the tires on the front axle can be rotated
with the inner tires on the rear axle in pairs
so that the intended rotation (spinning) direction of the tires remain the same. If the
tread
pattern on the tires is not unidirectional,
the outer tires can be rotated from one side
to another on the rear axle. Diagram showing tire rotation for single and double
tires
This Maintenance Booklet contains a
practical tire rotation confirmation page,
which you can use to record the date and
mileage for every tire rotation (
Y page 5). Arduous operating conditions
The maintenance intervals have been
determined
so that the vehicle, under normal
operating conditions, should operate
properly between maintenance services.
Arduous operating conditions may require
that the following parts be replaced at shorter
intervals:
R INTERIOR FILTERS
For example, dust filter, recirculating air
filter, activated charcoal filter or
combination filter) are replaced as required
by the maintenance computer. Under
severe dust conditions, or if the climate
control is operated frequently in air
recirculation mode, the filters should be
replaced more frequently than indicated by
the maintenance computer.
R COOLANT
The coolant (water/anticorrosion/
antifreeze mixture) should be replaced at
the specified maintenance intervals. Introduction
5
Maintenance Booklet
information about measuring the engine oil
level.
R Coolant level – The correct procedure for
checking the coolant level is described in
the Operator's Manual.
R Brake
fluid level – If the brake fluid has to
be topped up, visit an authorized Sprinter
dealer and have the cause determined, e.g.
leakage or worn brake pads.
R Windshield washer system – If the
washer fluid level falls below 1/3 full, the
warning lamp for the washer fluid level
lights up. Add washer fluid mixed with an
approved windshield washer solvent/
concentrate, test function and check wiper
blades.
R Lighting system
R Tire condition and tire pressure – Check
at least once a month. Refer to the "Tires
and Wheels" section in the Operator's
Manual for guidelines and the correct
procedure for checking the tire condition
and tire pressure. Notes on the warranty
An extensive and well-equipped network of
authorized Sprinter dealers is available to
carry
out maintenance work. Your authorized
Sprinter dealer can ensure that your vehicle
is thoroughly serviced and repaired by
professionals.
Please see the Service and Warranty
Information Booklet for detailed information
on warranty terms and coverage.
Please observe the maintenance
instructions in this Maintenance Booklet,
even if you allow a third party to use the
vehicle and entrust them with the vehicle
care. This way, you can ensure that your
warranty rights are not affected.
Service, replacement, or repair of the
emission control devices and systems
can be performed by any automotive
repair establishment or individual using
certified parts. We strongly recommend that any
maintenance work on your vehicle is
carried out by your authorized Sprinter
dealer
which is fully equipped to perform
this service.
Please note that engines have to be serviced
in accordance with special instructions and
using special measuring equipment to
comply with legal requirements concerning
exhaust emissions. Modifications to or
tampering with emissions components is not
permissible. Your authorized Sprinter dealer
is familiar with the relevant regulations. Service records
Your authorized Sprinter dealer will certify in
this booklet the maintenance services on
your vehicle which it has performed.
Other than the maintenance services
described,
the Maintenance Booklet does not
record or reflect any repair work that may
have been performed on your vehicle. Please
keep those receipts with your vehicle
records.
You can find information about the warranty
in your Service and Warranty Information
Booklet.
Your authorized Sprinter dealer will gladly
provide more information on the
maintenance of your vehicle. Parts/operating materials
We only recommend the use of genuine
Mercedes-Benz parts for service and repair
work,
as these conform to our specifications.
In addition, only fuels, lubricants and
corrosion inhibitor/antifreeze that
correspond to the factory specifications
should be used. Please see your authorized
Sprinter dealer for more information on this
subject. Introduction
7
Maintenance Booklet
