2010 MERCEDES-BENZ SLS COUPE stop start

Menu overview
CD or audio
DVD or MP3 Audio DVD
only:
0007
/0010 /
000D Track list or
folders Media or
CD changer Sound
Group (DVD-A
only) 0007
Pauses
playback Shows track list
(audio CD/
audio DVD
mode only) Media selection via
media list
R
Media
For single DVD
drive or for DVD
changer* when
operated in
Media Inter-
face* mode
R Changer
For DVD
changer* Treble
Normal track
sequence 0010
Stops
playback Selects folder
(MP3 mode
only) Bass
Random tracks 000D
Restarts
or continues
playback Balance
Random folder
(MP3 mode
only) Bang & Oluf-
sen sound
system*
0019
Switches TA
(traf-
fic announce-
ments) on/off "Gracenote
®
Media Data-
base" function
(CD mode only) 172
AudioCOMAND APS
*o
ptional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 172

Example display in audio DVD mode
0001
Type of data medium ü
0002 Track number
0015 Trac kname (only if stored on the disc as
CD text)
0014 Track time
0012 Graphic time and track display
0013 Curren tplayback settings (no icon for
"Normal track sequence")
000A Sound settings
000B Media selection (display shows either
Media orChanger)
000C Disc name (only if stored on the disc)
000D To call up the track list
000E Stop function
000F Pause function
0010 Data medium position in the media list
0011 Playback options
Example display in MP3 mode 0001
Data medium type: memory card or þ
0002 Track number
0015 Track name 0014
Track time
0012 Graphic time and track display
0013 Curren tplayback settings (no icon for
"Normal track sequence")
000A Sound settings
000B Media selection (display shows either
Changer orMedia)
000C Curren tfolder
000D To call up the folder list
000E Data medium position in the media list
000F Playback options
i If no Media Interface*(Y page 183) is
connected during operation with a DVD
changer*, 000Bdisplays Changer instead of
Media.
i For an example display of the media list,
see (Y page 175).
Stop function i
This function is only available in audio
DVD mode.
X Switch to audio DVD mode.
X To interrupt playback: select0010.
The 0007 display changes to 000D.0010
remains highlighted.
X To resume playback: select000D.
Playback continues from the point where it
was interrupted.
X To stop playback: select0010again while
playback is interrupted.
or
X Select 0010twice in quick succession dur-
ing playback.
000D is highlighted.
X To restart playback: select000D.
Playback starts from the start of the DVD. 174
AudioCOMAND APS
*o
ptional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 174

Overview of the video DVD menu
DVD-V 0007 /000D 0010
Media or
CD changer Sound
DVD functions 0007
Pauses
playback 0010
Stops
playback Media selec-
tion via media
list
(Y
page 194) Treble
Brightness 000D
Contin-
ues playback Bass
Contrast 000D
Restarts
playback Balance
Colour Bang
&Olufsen
sound system* 16:9 optimised
4:3
Widescreen
Switching to video DVD mode
From the control panel
X
Insert a video DVD (Y page 168).
COMAND loads the medium inserted and
starts to play it.
or
X From another main function: press the
000E function button.
The function button takes you directly to
the last active disc mode (audio CD, audio
DVD, MP3 CD or video DVD). COMAND
accesses all discs in the DV Dchanger* or
the disc in the single DVD drive.
If you previously selected video DVD mode,
it will now be switched on.
If you have another disc mode activated:
X Select MediaorChanger.
The media list (Y page 194) appears.
X Select video DVD. Via the COMAND controller
X
Select Videofrom the main functions
menu bar.
Hiding or showing the control menu X
To show: turn002800130029 or slide 001F0013000D.
i This function is not available while the
DVD's own menu is being displayed.
X To hide: slide001F0013000D or wait approximately
eight seconds. Video
193COMAND APS
*optional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 193 Z

X
To stop playback: select0010againwhile
playback is interrupted.
or
X Select 0010twice in quick succession dur-
ing playback.
Selection is at 000D.
X To restart playback: select000D.
Playback restarts from the beginning.
Pause function X
Show the menu system (Y page 194).
X To pause playback: select0007.
The 0007 display changes to 000D.
X To resume playback: select000D.
The menu system is hidden.
Selecting ascene/chapter X
To skip forwards/back: turn002800130029 or slide
002B0013002C .
or
X Press the 0001or0002 buttonont he con-
trol panel.
The control menu (Y page 194) appears for
approximately 8seconds.
Using the multifunction steering wheel
X In COMAND, switch to video DVD mode
(Y page 193).
X Press 0008or000E to select the Audio
menu.
X Press 000For000C to select a scene/
chapter.
Selecting afilm/title i
This function is only available if the DVD
is divided into several films/titles.
X Show the menu syste m(Ypage 194).
X Select DVD-V0004 DVD functions.
Am enu appears. DVD function menu
X
Turn 002800130029 or slide 001F0013000DuntilTitle
selection is selected.
X To call up the selection list: press0017.
X Select a film/title.
Picture settings Adjusting the brightness, contrast or col-
our
X
Show the menu system (Y page 194).
X Select DVD-V0004Brightness, Contrastor
Colour.
X To change the setting: turn002800130029 or slide
001F0013000D until the desired setting is reached.
X To save the setting: press0017.
Switching the picture format
X Show the menu system (Y page 194).
X Select DVD-V.
The DVD-V menu appears. The filled-in
option button in fron tofone of these menu
items: 16:9 optimised ,4:3 orWide‐
screen indicates the format currently
selected.
X To change the format: turn002800130029 or slide
001F0013000D until the desired format is selected.
X To save the setting: press0017.
DVD menu i
The DVD menu is the menu stored on the
DVD itself. It is structured in various ways Video
195COMAND APS
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeuV ersion: 3.0.3.6
2010-05-07T14:19:43+02:00 - Seite 195 Z

X
Reach into the gap and pull up the boo tlid. G
Risk of injury
Make sure that nobody can become trapped
when closing the boot lid. X
To close: push the boot lid down until it
engages. Use handle 0001to pull down the
boot lid if necessary.
X If necessary, lock the vehicle with the
0009 button on the key. Unlocking from inside the vehicle
You can unlock the boot lid from the driver's
seat when the vehicle is stationary. X
Press boot lid remote control button 0001.
The boot lid opens slightly. Locking the boot separately
You can lock the boot separately 10
.T he boot
can then only be unlocked using the emer-
gency key element.
X Close the boot lid.
X Take the emergency key element out of the
key (Y page 321). X
Insert the emergency key element fully into
boot lid lock 0001in the rear compartment of
the centre console.
X Turn the emergency key element clockwise
as far as possible.
X Remove the emergency key element.
X Check that the boot remains locked when
you press on the boot lid remote control
button. Key positions
KEYLESS-GO startf
unction
You can switch the engine on and off with the
Start/Stop button. To this end, the key must
be in the vehicle interio r(but not in the boot).
The Start/Stop button is in the centre con-
sole and is lit up when the vehicle is unlocked.
If you press the Start/Stop button repeatedly
without depressing the brake pedal, its func-
tion corresponds to the differen tkey posi-
tions in the ignition lock. This requires that
you do not depress the brake pedal.
10 Not available in all countries. 202
Key positionsControls
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 202

If you depress the brake pedal and press the
Start/Stop button, the engine starts immedi-
ately.
If there is a key in the ignition lock, it has pri-
ority over the KEYLESS-GO start function. X
Position 0: if Start/Stop button 0001has not
yet been pressed, this corresponds to "key
removed".
X Position 1: press Start/Stop button 0001
once.
It is now possible to switch on the wind-
screen wipers, for example.
If you press Start/Stop button 0001in this posi-
tion twice and the driver's door is open, the
powers upply is disconnected again.
X Position 2(ignition): press Start/Stop but-
ton 0001twice.
If you press Start/Stop button 0001in this posi-
tion once and the driver's door is open, the
power supply is disconnected again. Ignition lock
You can also start the vehicle using the key
in the ignition lock.
The ignition lock is in the rear compartment
of the centre console. 0008
To remove the key
0003 Power supply for some consumers, such
as the windscree nwipers
0004 Ignition (power supply for all consumers)
and drive position
0005 To start the engine
i Even if the key is not for the vehicle in
question, it will still tur ninthe ignition lock.
The ignition is not switched on. The engine
cannot be started. Seats
Please bear the following in mind
Depending on the vehicle's equipment, the
seats can be adjusted either manually or elec-
trically*. G
Risk of injury
The seats can be adjusted when the key has
been removed from the ignition/vehicle. For
this reason, children should never be left
unsupervised in the vehicle. They could adjust
the seats and become trapped. G
Risk of accident
Only adjust the driver's seat when the vehicle
is stationary. You will otherwise be distracted
from the road and traffic conditions and you
could lose control of the vehicle as a result of
the seat moving. This could cause an acci-
dent. Seats
203Controls
*optional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 203 Z

Adjusting the sea
tcushio nangle X
Slide the button up or down in the direction
of arrow 0015.
Adjusting the seat height X
Slide the button up or down in the direction
of arrow 0014.
Adjusting the backrest contour and lat-
eral structure You can adjust the contour of the seats in the
back and side areas individually. 0001
To adjust the upper back support
0002 To adjust the contour of the backrest in
the lumbar region
0015 To adjust the lateral structure and sup-
port of the seat
X To adjust the seat: select key position2
with the Start/Stop button.
X Press the upper or lower section of but-
ton 0001, 0002or0015.
i If, after a certain amount of time, the seat
no longer has the desired contour, repeat
the adjustment. Adjusting the bucket seat*
The bucket seats cannot be adjusted electri-
cally. Adjusting the seat fore-and-aft position
X
Pull handle 0001up and slide the seat for-
wards or backwards.
X Release handle 0001again.
Make sure that you hear the seat engage in
position.
Adjusting the seat height You can have the seat height adjusted to one
of three levels. To do so, please contact a
qualified specialist workshop. Mercedes-
Benz recommends that you use a Mercedes-
Benz Service Centre for this purpose.
Seat heating
G
Risk of injury
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3repeatedly. Seats
205Controls
*optional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 205 Z

The three red indicator lamps in button
0001
show which heating level the seat heating is
set to.
The system automatically switches down
from level 3to level 2after approximately five
minutes.
The system automatically switches down
from level 2to level 1after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
X Select key position 2with the Start/Stop
button.
X To switch on: press button0001repeatedly
until the desired heating level is set.
X To switch off: press button0001repeatedly
until all the indicator lamps go out.
i If the battery voltage is too low, the seat
heating is switched off automatically. Steering wheel
Please bear the following in mind
Depending on the vehicle's equipment, the
steering wheel can be adjusted either man-
ually or electrically*. G
Risk of injury
The electrically adjustable steering wheel*
can be adjusted whe nthe key is removed
from the ignition lock and the driver's door is
open. Therefore, do not leave children unsu- pervised in the vehicle as they could become
trapped as the steering wheel is adjusted.
G
Risk of accident
Only adjust the steering wheel when the vehi-
cle is stationary and do not pull away until the
steering wheel adjustment mechanism is
locked in position. You might otherwise drive
without the steering wheel adjustment mech-
anism being locked in position. As a result,
you could be distracted from road and traffic
conditions by an unintentional movement of
the steering wheel and thereby cause an acci-
dent.
However, the steerability of the vehicle is not
affected.
When you adjust the steering wheel, make
sure that:
R the steering wheel can be reached with
your arms slightly bent
R you can move your legs freely
R you can see all the displays in the instru-
ment cluster clearly Adjusting the steering wheel
Adjusting the steering wheel manually 0001
Release lever
0002 Height adjustment
0015 Fore-and-aft adjustment 206
Steering wheelControls
*o
ptional
BA 197 ECE RE 2010/6a; 1; 2, en-GB
sabbaeu
Version: 3.0.3.6 2010-05-07T14:19:43+02:00 - Seite 206