Rear axle oil ......................................... 35
Recuperation statistics (COMAND) ... 16
Rims ...................................................... 33
Risk of fire see Safety notes
S
Safety see Operating safety
Safety notes ........................................... 9
Spare wheel ......................................... 34
SRS (Supplemental Restraint System)
Indicator lamp .................................. 26
Start/Stop function
see ECO Start/Stop function
Starting
see Combustion engine
Stop-and-go traffic .............................. 17
Submenu
Multifunction and COMAND
display ............................................. 14
Resetting values (COMAND) ............16
T
Technical data
Capacities fuels, coolants,
lubricants etc. .................................. 34
Coolant ............................................ 36
Engine oils ....................................... 36
Rims and tires .................................. 33
Spare wheel ..................................... 34
Vehicle specification
S 400 HYBRID .................................. 32
Washer and headlamp cleaning
system ............................................. 35
Tires ...................................................... 33
Towing
Vehicle ............................................. 31
Trailer hitch ............................................ 7
Turning off see ECO Start/Stop function
V
Vehicle
Disuse .............................................. 27
Towing ............................................. 31
Vehicle fire
see Safety notes
Vehicle modifications ........................... 7
Vehicle specification
S 400 HYBRID .................................. 32
W
Warning labels ....................................... 9
Wheels, sizes ....................................... 33
Winter tires .......................................... 33
6Index221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 6
Disconnecting the jumper cablesXDisconnect the jumper cables in reverse
order, starting with jump start terminal 4
( Y page 30).XInstall the jump start terminal cover
( Y page 28).XInstall the high-voltage battery cover
( Y page 27).XClose the hood.XDrive the vehicle for some time in order to
charge the 12-volt battery and the high-
voltage battery.
Towing the vehicle
i For information on towing and
transporting the vehicle refer to the
Operator’s Manual.
GWarning!
When you depress the brake pedal for the first
time when towing, less brake pedal pressure
is required and the brake pedal travel is longer
than usual. The same applies if a malfunction
occurs, for example when the vehicle system
voltage is too low. If required, you have to
depress the brake pedal further. Adapt your
speed and driving accordingly.
Depress the brake pedal fully and release it
again before towing. When all necessary
systems are operational again, the required
brake pedal pressure and the brake pedal
travel are back to normal.
Practical hints31221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 31Z
