2010 LINCOLN MKZ warning

[x] Cancel search: warning

Page 119 of 318

LINCOLN MKZ 2010  Owners Manual 2. Lower the head restraint by
pressing and holding the guide
sleeve adjust/release button and
pushing down on the head restraint.
Properly adjust the head restraint so that the top of the head restra

Page 121 of 318

LINCOLN MKZ 2010  Owners Manual To reinstall the adjustable head restraint, do the following:
1. Insert the two stems into the
guide sleeve collars.
2. Push the head restraint down
until it locks.
Properly adjust the head restraint

Page 122 of 318

LINCOLN MKZ 2010  Owners Manual To lower the seatback(s), pull the
release handle(s) located inside the
trunk.
Fold the seatback(s) down.
WARNING:Before returning the seatback to its original
position, make sure that cargo or any ob

Page 123 of 318

LINCOLN MKZ 2010  Owners Manual Seat-mounted cup holders and armrest storage compartment
To access the cup holders, fold the
armrest down.
WARNING:Use only soft cups in the cup holder. Hard objects
can injure you in a collision.
SAF

Page 125 of 318

LINCOLN MKZ 2010  Owners Manual to the airbag when it begins to inflate. For some occupants, this occurs
because they are initially sitting very close to the airbag. For other
occupants, this occurs when the occupant is not properly

Page 126 of 318

LINCOLN MKZ 2010  Owners Manual Front safety belt energy management retractors
The front outboard safety belt energy management retractors allow
webbing to be pulled out of the retractor in a gradual and controlled
manner in respons

Page 127 of 318

LINCOLN MKZ 2010  Owners Manual WARNING:Never let a passenger hold a child on his or her lap
while the vehicle is moving. The passenger cannot protect the
child from injury in a collision.
WARNING:All occupants of the vehicle, inclu

Page 128 of 318

LINCOLN MKZ 2010  Owners Manual Combination lap and shoulder belts
1. Insert the belt tongue into the
proper buckle (the buckle closest to
the direction the tongue is coming
from) until you hear a snap and feel
it latch. Make sure t