2010 LINCOLN MKX warning light

[x] Cancel search: warning light

Page 143 of 316

LINCOLN MKX 2010  Owners Manual WARNING:Any alteration/modification to the front passenger
seat may affect the performance of the front passenger sensing
system.
Determining if the system is operational
The supplemental restraint sy

Page 144 of 316

LINCOLN MKX 2010  Owners Manual WARNING:Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. Contact your authorized dealer as soon as possible.
WARNING:All occupan

Page 145 of 316

LINCOLN MKX 2010  Owners Manual The fact that the airbags did not inflate in a collision does not mean that
something is wrong with the system. Rather, it means the forces were
not of the type sufficient to cause activation. Side ai

Page 148 of 316

LINCOLN MKX 2010  Owners Manual The Safety Canopysystem is designed to activate when the vehicle
sustains lateral deceleration sufficient to cause the side crash sensor to
close an electrical circuit that initiates Safety Canopyin

Page 149 of 316

LINCOLN MKX 2010  Owners Manual •The readiness light will not illuminate immediately after ignition is
turned on.
•A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and light are r

Page 186 of 316

LINCOLN MKX 2010  Owners Manual Understanding your Tire Pressure Monitoring System (TPMS)
The Tire Pressure Monitoring System measures pressure in your four
road tires and sends the tire pressure readings to your vehicle. The Low
Ti

Page 187 of 316

LINCOLN MKX 2010  Owners Manual When you believe your system is not operating properly
The main function of the Tire Pressure Monitoring System is to warn you
when your tires need air. It can also warn you in the event the system is

Page 188 of 316

LINCOLN MKX 2010  Owners Manual Low Tire Pressure
Warning LightPossible cause Customer Action Required
Flashing Warning
LightSpare tire in use Your temporary spare tire is in
use. Repair the damaged road
wheel and re-mount it on the