2010 Lexus HS250h CD player

316
3-3. Using the Bluetooth® audio system
Using the Bluetooth® audio system for the first time
Before using the Bluetooth
® audio system, it is necessary to register a
Bluetooth® enabled portable player in the system. Follow the procedure
below to register (pair) a portable player:
Press and select “BT•A MENU” using .
Press the talk switch or select “BT•A Setup” using .
The introductory guidance and portable player name registration
instructions ar
e heard.
Select “Pair Audio Player (Pair A
udio)” using a voice command
or .
Register a portable player name b
y either of the following meth-
ods:
a. Select “Record Name” using , and say the name to be
registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the inpu
t is heard.
Select “Confirm” using a voice command or .
A passkey is displayed and heard, an d a v
oice guidance instruction for
inputting the passkey into the portable player is heard.
Input the passkey into the portable player.
Refer to the manual that comes with the portable player for the opera -
tion of the portable player.

317
3-3. Using the Bluetooth® audio system
3
Interior features
Guidance for registration completion is heard.
If the portable play
er has a Bluetooth® phone, the phone can be regis -
tered at the same time. A voice guid ance instruction to r
egister a Blue-
tooth® phone is heard.
Select “Yes” or “No” using a voice command or .
(Bluetooth
® phone P. 3 3 0 )
Menu list of the Bluetooth® audio system
■ Normal oper
ation
First menuSecondmenuOperation detail
“BT•A 
Setup”
“Pair Audio”Registering a portable player
“Connect”Selecting a portable player to be used
“Change Name”Changing the registered name of a
portable player
“List Audios”Listing the registered portable players
“Set Passkey”Changing the passkey
“Delete Audio”Deleting a registered portable player
“System
Setup”
“Guidance Vol”Setting voice guidance volume
“Device Name”Displaying the Bluetooth® device
address and name
“Initialize”Initializing the system

318
3-3. Using the Bluetooth® audio system
■When using a voice command
For numbers, say a combination of sin
gle digits from zero to nine.
Say the command correctly and clearly.
■Situations that the system may not recognize your voice
●When driving on rough roads
●When driving at high speeds
●When air is blowing out of the vents onto the microphone
●When the air conditioning fan emits a loud noise
■Operations that cannot be performed while driving
●Operating the system with
●Registering a portable player to the system
■Changing the passkey
P.
3 2 5

319
3-3. Using the Bluetooth® audio system
3
Interior features
Operating a Bluetooth® enabled portable player
“PWRVOL” k nob
Pow e r Vo l u m e
Te x t b u t t o n
Playback buttonSearch playback button
Random playback button
BT·A menu knob
Repeat play button
Track selector buttons Playback/Pause button
Album selector buttons

321
3-3. Using the Bluetooth® audio system
3
Interior features
Switching the display
Press .
Each time the button is pressed, the display changes in the following order:
Elapsed time  Album title  Tr a c k t i t l e  Artist name
Using the steering wheel audio switches
P. 308
■Bluetooth® audio system functions
Depending on the portable player that is conn
ected to the system, certain functions
may not be available.
■Display
 P.
2 7 7
■Error messages
“Memory Error”: This indicates a problem in the system.

322
3-3. Using the Bluetooth® audio system
Setting up a Bluetooth® enabled portable player
Registering a portable player in the Bluetooth® audio system allows the
system to function. The following functions can be used for registered por -
table players:
■ Functions and operation procedures
To enter the menu for each function , follo
w the steps below using a
voice command or :
● R
egistering a portable player 
1. “Bluetooth Audio Setup (BT•A Setup)”  
2. “Pair Audio Player (Pair Audio)”
● Selecting a por
table player to be used 
1. “Bluetooth Audio Setup (BT•A Setup)”  
2. “Connect Audio Player (Connect)”
● Changing the r
egistered name of a portable player 
1. “Bluetooth Audio Setup (BT•A Setup)”  2. “
Change Name”
● Listing the r
egistered portable players 
1. “Bluetooth Audio Setup (BT•A Setup)”  
2. “List Audio Players (List Audios)”
● Changing the pas
skey 
1. “Bluetooth Audio Setup (BT•A Setup)”  2 “
Set Passkey”
● D
eleting a registered portable player 
1. “Bluetooth Audio Setup (BT•A Setup)”  
2. “Delete Audio Player (Delete Audio)”

323
3-3. Using the Bluetooth® audio system
3
Interior features
Registering a portable player
Select “Pair Audio Player (Pair Audio)” using a voice command or , and perform the procedure for r
egistering a portable player.
(  P. 316 )
Selecting a portable player to be used
Select “Connect Audio Player (Connect)” using a voice com-
mand or .
Select the portable player to be used b
y either of the following
methods, and select “Confirm” b
y using a voice command or
:
a. Press the talk switch and say the name of the desir
ed portable
player.
b. Press the talk switch and sa y “List A
udio Players”. When the
name of the desired portable pl ayer is read aloud, press the
talk switch.
Press the talk switch and say “From Car” or “From Audio player”,
and select “Confirm” by using a voice command or .
If “From Car” is selected, the portable player will be automatically con -
nected whenever the “POWER” switch is in either ACCESSORY or
IGNITION ON
mode.

324
3-3. Using the Bluetooth® audio system
Changing the registered name of a portable player
Select “Change Name” using a voice command or .
Select the name of the portable pl ay
er to be changed by either of
the following methods, and sele ct “
Confirm” using a voice com-
mand or :
a. Press the talk switch and say the name of desir
ed portable
player.
b. Press the talk switch and sa y “List A
udio Players”. When the
name of the desired portable pl ayer is read aloud, press the
talk switch.
Press the talk switch or select “Record Name” using ,
and say the new name.
Select “Confirm” using a voice command or .
Listing the registered portable players
Select “List Audio Players (List Audios)” using a voice command or
. The list of regis ter
ed portable players will be read aloud.
When listing is complete, the sy stem r
eturns to “BT•A Setup”.
Pressing the talk switch while the name of a portable player is being read
aloud selects the por
table player, and the following functions will become
available:
● Selecting a por
table player: “Connect Audio Player (Connect)”
● Changing a r
egistered name: “Change Name”
● Deleting a por
table player: “Delete Audio Player (Delete Audio)”