2010 JEEP COMPASS headlight bulb

NOTE:If either light remains on and does not flash, or
there is a very fast flash rate, check for a defective outside
light bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.
Lane Change Assist
Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.
High/Low Beam Switch
Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you, to switch the headlights back to low beam.
Flash-to-Pass
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.
NOTE: If the multifunction lever is held in the flash-to-
pass position for more than 30 seconds, the high beams
will shut off. If this occurs, wait 30 seconds for the next
flash-to-pass operation.
Turn Signals
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143

continuous chime will sound to alert you to turn the
signals off. If either indicator flashes at a rapid rate, check
for a defective outside light bulb.
9. High Beam IndicatorThis indicator shows that the high beam head-
lights are on. Push the multifunction lever forward
to switch the headlights to high beam, and pull toward
yourself (normal position) to return to low beam.
10. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System
(ABS). The light will turn on when the ignition
switch is turned to the ON position and may
stay on for as long as four seconds.
If the ABS light remains on or turns on while driving, it
indicates that the Anti-Lock portion of the brake system
is not functioning and that service is required. However,
the conventional brake system will continue to operate
normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced
as soon as possible to restore the benefits of Anti-Lock
brakes. If the ABS light does not turn on when the
ignition switch is turned to the ON position, have the
light inspected by an authorized dealer.
11. Seat Belt Reminder Light
When the ignition switch is first turned ON, this
light will turn on for five to eight seconds as a bulb
check. During the bulb check, if the driver’s seat
belt is unbuckled, a chime will sound. After the bulb
check or when driving, if the driver’s seat belt remains
unbuckled, the Seat Belt Reminder Light will illuminate
and the chime will sound. Refer to “Occupant Restraints”
in “Things To Know Before Starting Your Vehicle” for
further information.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 185

Lights.............................. 83,140
Airbag ...................... 57,64,70,82,184
Alarm .............................. 188
Anti-Lock ........................... 185
Back-Up ............................ 416
Brake Warning ........................ 186
Bulb Replacement ...................... 413
Cargo .............................. 169
Center Mounted Stop ................... 419
Daytime Running ...................... 142
Dimmer Switch, Headlight ............... 140
Electronic Stability Program (ESP) Indicator . . . 304
Engine Temperature Warning .............. 186
Exterior .............................. 83
Fog .......................... 142,195,415
Headlight Switch ...................... 140
Headlights ........................... 140
High Beam Indicator .................... 185
Instrument Cluster ..................... 140 License
............................. 417
Lights On Reminder .................... 141
Low Fuel ............................ 184
Malfunction Indicator (Check Engine) ........ 194
Map Reading ......................... 144
Oil Pressure .......................... 184
Seat Belt Reminder ..................... 185
Security Alarm (Theft Alarm) ............18,188
Theft Alarm (Security Alarm) .............. 188
Tire Pressure Monitoring (TPMS) ........... 190
Traction Control ....................... 304
Turn Signal ................... 83,140,142,416
Voltage ............................. 183
Warning (Instrument Cluster Description) ..... 183
Loading Vehicle ...................... 341,343
Capacities ........................... 343
Tires ............................... 313
464 INDEX