*1: For additional information, see “ENGINE OIL” in the “8. Maintenance and do-it-yourself” section for changing engine oil.
*2:INFINITI recommends Genuine NISSAN Ester Engine Oil available at INFINITI retailers.
*3: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission
durability, and may damage the automatic transmission, which is not covered by the INFINITI new vehicle limited warranty.
*4: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 32°F (0°C).
*5: See an INFINITI retailer for service.
*6: Using transfer fluid other than Genuine NISSAN Matic J ATF will cause deterioration in drive ability and transfer durability, and may damage the transfer, which is not covered by the INFINITI new vehicle limited warranty.
*7: DEXRON
TMVI type ATF may also be used.
*8: Available in mainland US through an INFINITI retailer.
*9: For additional information, see “VEHICLE IDENTIFICATION” later in this section for air conditioner specification label.
Technical and consumer information9-3
—
—
08/03/09—pattie
1. API certification mark
2. API service symbol
ENGINE OIL AND OIL FILTER
RECOMMENDATION
Selecting the correct oil
It is essential to choose the correct grade,
quality, and viscosity engine oil to ensure sat-
isfactory engine life and performance, see “CA-
PACITIES AND RECOMMENDED
FUEL/LUBRICANTS” earlier in this section.
INFINITI recommends the use of an energy
conserving oil in order to improve fuel economy.Select only engine oils that meet the American
Petroleum Institute (API) certification or Interna-
tional Lubricant Standardization and Approval
Committee (ILSAC) certification and SAE viscos-
ity standard. These oils have the API certifica-
tion mark on the front of the container. Oils
which do not have the specified quality label
should not be used as they could cause engine
damage.
Oil additives
INFINITI does not recommend the use of oil
additives. The use of an oil additive is not
necessary when the proper oil type is used and
maintenance intervals are followed.Oil which may contain foreign matter or has
been previously used should not be used.
Oil viscosity
The engine oil viscosity or thickness changes
with temperature. Because of this, it is impor-
tant that the engine oil viscosity be selected
based on the temperatures at which the vehicle
will be operated before the next oil change.
Choosing an oil viscosity other than that recom-
mended could cause serious engine damage.
Selecting the correct oil filter
Your new vehicle is equipped with a high-
quality genuine NISSAN oil filter. When replac-
ing, use the genuine oil filter or its equivalent
for the reason described in change intervals.
Change intervals
The oil and oil filter change intervals for your
engine are based on the use of the specified
quality oils and filters. Oil and filter other than
the specified quality, or oil and filter change
intervals longer than recommended could re-
duce engine life. Damage to engines caused by
improper maintenance or use of incorrect oil
and filter quality and/or viscosity is not covered
by the new INFINITI vehicle limited warranties.
Your engine was filled with a high quality
engine oil when it was built. You do not have to
STI0505
9-6Technical and consumer information
—
—
08/03/09—pattie
change the oil before the first recommended
change interval. Oil and filter change intervals
depend upon how you use your vehicle. Opera-
tion under the following conditions may require
more frequent oil and filter changes.
●repeated short distance driving at cold out-
side temperatures,
● driving in dusty conditions,
● extensive idling,
● towing a trailer,
● stop and go “rush hour” traffic,
Refer to the “INFINITI Service and Maintenance
Guide” for the maintenance schedule.AIR CONDITIONING SYSTEM
REFRIGERANT AND LUBRICANT
RECOMMENDATIONS
The air conditioning system in your INFINITI ve-
hicle must be charged with the refrigerant HFC-
134a (R-134a) and the lubricant, NISSAN A/C sys-
tem oil Type S or the exact equivalents.
CAUTION
The use of any other refrigerant or lubricant will
cause severe damage to the air conditioning
system and will require the replacement of all
air conditioner system components.
The refrigerant HFC-134a (R-134a) in your
INFINITI vehicle will not harm the earth’s ozone
layer. Although this refrigerant does not affect
the earth’s atmosphere, certain governmental
regulations require the recovery and recycling
of any refrigerant during automotive air condi-
tioning system service. Your INFINITI retailer
has the trained technicians and equipment
needed to recover and recycle your air condi-
tioning system refrigerant.
Contact an INFINITI retailer when servicing your
air conditioning system.
Technical and consumer information9-7
—
—
08/03/09—pattie
back up slowly. If possible, have someone
guide you when you are backing up.
Always block the wheels on both vehicle and
trailer when parking. Parking on a slope is not
recommended; however, if you must do so:
CAUTION
If you move the shift selector lever to the P
(Park) position before blocking the wheels and
applying the parking brake, transmission dam-
age could occur.
1. Apply and hold the brake pedal.
2. Have someone place blocks on the down- hill side of the vehicle and trailer wheels.
3. After the wheel blocks are in place, slowly release the brake pedal until the blocks
absorb the vehicle load.
4. Apply the parking brake.
5. Shift the transmission into P (Park).
6. Turn off the engine.
To drive away:
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift the transmission into gear.
4. Release the parking brake. 5. Drive slowly until the vehicle and trailer
are clear from the blocks.
6. Apply and hold the brake pedal.
7. Have someone retrieve and store the blocks.
● When going down a hill, shift into a lower
gear and use the engine braking effect.
When going up a long grade, downshift the
transmission to a lower gear and reduce
speed to reduce chances of engine overload-
ing and/or overheating.
● If the engine coolant rises to an extremely
high temperature when the air conditioning
system is on, turn off the air conditioner.
Coolant heat can be additionally vented by
opening the windows, switching the fan
control to high and setting the temperature
control to the HOT position.
● Trailer towing requires more fuel than nor-
mal circumstances.
● Avoid towing a trailer for the first 500 miles
(800 km).
● Have your vehicle serviced more often than
at intervals specified in the recommended
maintenance schedule in the INFINITI Service
and Maintenance Guide.
● When making a turn, your trailer wheels will
be closer to the inside of the turn than your vehicle wheels. To compensate for this,
make a larger than normal turning radius
during the turn.
● Crosswinds and rough roads will adversely
affect vehicle/trailer handling, possibly
causing vehicle sway. When being passed by
larger vehicles, be prepared for possible
changes in crosswinds that could affect ve-
hicle handling. If swaying does occur, firmly
grip the steering wheel, steer straight
ahead, and immediately (but gradually) re-
duce vehicle speed. This combination will
help stabilize the vehicle. Never increase
speed.
Do the following if the trailer begins to sway:
1. Take your foot off the accelerator pedal to allow the vehicle to coast and steer as
straight ahead as the road conditions
allow. This combination will help stabilize
the vehicle.
– Do not correct trailer sway by steering orapplying the brakes.
2. When the trailer sway stops, gently apply the brakes and pull to the side of the road
in a safe area.
3. Try to rearrange the trailer load so it is balanced as described earlier in this sec-
tion.
9-26Technical and consumer information
—
—
08/03/09—pattie
●Be careful when passing other vehicles.
Passing while towing a trailer requires con-
siderably more distance than normal pass-
ing. Remember the length of the trailer must
also pass the other vehicle before you can
safely change lanes.
● Down shift the transmission to a lower gear
for engine braking when driving down steep
or long hills. This will help slow the vehicle
without applying the brakes.
● Avoid holding the brake pedal down too long
or too frequently. This could cause the
brakes to overheat, resulting in reduced
braking efficiency.
● Increase your following distance to allow for
greater stopping distances while towing a
trailer. Anticipate stops and brake gradually.
● Do not use cruise control while towing a
trailer.
● Some states or provinces have specific regu-
lations and speed limits for vehicles that are
towing trailers. Obey the local speed limits.
● Check your hitch, trailer wiring harness con-
nections, and trailer wheel lug nuts after 50
miles (80 km) of travel and at every break.
● When stopped in traffic for long periods of
time in hot weather, put the vehicle in the P
(Park) position. ●
When launching a boat, don’t allow the
water level to go over the exhaust tail pipe or
rear bumper.
● Make sure you disconnect the trailer lights
before backing the trailer into the water or
the trailer lights may burn out.
When towing a trailer, the transmission fluid
should be changed more frequently. For addi-
tional information, see the “8. Maintenance and
do-it-yourself” section earlier in this manual.
FLAT TOWING
Towing your vehicle with all four wheels on the
ground is sometimes called flat towing. This
method is sometimes used when towing a
vehicle behind a recreational vehicle, such as a
motor home.
CAUTION
● Failure to follow these guidelines can result
in severe transmission damage.
● Whenever flat towing your vehicle, always
tow forward, never backward.
● DO NOT tow any automatic transmission ve-
hicle with all four wheels on the ground (flat
towing). Doing so WILL DAMAGE internal
transmission parts due to lack of transmis-
sion lubrication. ●
DO NOT tow an All-Wheel Drive (AWD) ve-
hicle with any of the wheels on the ground.
Doing so may cause serious and expensive
damage to the powertrain.
● For emergency towing procedures refer to
“TOWING RECOMMENDED BY INFINITI” in the
“6. In case of emergency” section of this
manual.
Automatic transmission
All-Wheel Drive (AWD) models :
Do not tow an AWD vehicle with any of the
wheels on the ground.
Two-Wheel Drive (2WD) models :
To tow a vehicle equipped with an automatic
transmission, an appropriate vehicle dolly
MUST be placed under the towed vehicle’s drive
wheels. Alwaysfollow the dolly manufacturer’s
recommendations when using their product.
Technical and consumer information9-27
—
—
08/03/09—pattie
You may notify INFINITI by contacting our
Consumer Affairs Department, toll-free,
at 1-800-662-6200.A vehicle equipped with All-Wheel Drive (AWD)
should never be tested using a two wheel
dynamometer (such as the dynamometers used
by some states for emissions testing), or similar
equipment. Make sure you inform test facility
personnel that your vehicle is equipped with
AWD before it is placed on a dynamometer.
Using the wrong test equipment may result in
transmission damage or unexpected vehicle
movement which could result in serious vehicle
damage or personal injury.
Due to legal requirements in some states/ areas
or provinces, your vehicle may be required to be
in what is called the “ready condition” for an
Inspection/Maintenance (I/M) test of the emis-
sion control system.
The vehicle is set to the “ready condition” when
it is driven through certain driving patterns.
Usually, the “ready condition” can be obtained
by ordinary usage of the vehicle.
If a powertrain system component is repaired or
the battery is disconnected, the vehicle may be
reset to a “not ready condition”. Before taking
the I/M test, check the vehicle’s
inspection/maintenance test readiness condi-
tion. Push the ignition switch to the ON position
without starting the engine. If the Malfunction
Indicator Light (MIL) comes on steady for 20
seconds and then blinks for 10 seconds, the I/Mtest condition is “not ready”. If the MIL does not
blink after 20 seconds, the I/M test condition is
“ready”.
If the MIL indicates the vehicle is in a “not
ready” condition, drive the vehicle through the
following pattern to set the vehicle to the
“ready condition”. If you cannot or do not want
to perform the driving pattern, an INFINITI re-
tailer can conduct it for you.
WARNING
Always drive the vehicle in a safe and prudent
manner according to traffic conditions and
obey all traffic laws.
1. Start the engine. Allow the engine to idle
until the engine coolant temperature
gauge needle points between the C and H
(normal operating temperature).
2. Accelerate the vehicle to 55 MPH (88 km/h), then quickly release the accelera-
tor pedal completely and keep it released
for at least 10 seconds.
3. Quickly depress the accelerator pedal for a moment, then drive the vehicle at a
speed of 53 to 60 MPH (86 to 96 km/h) for
at least 9 minutes.
4. Stop the vehicle. Leave the engine run- ning.
READINESS FOR INSPECTION/
MAINTENANCE (I/M) TEST
9-30Technical and consumer information
—
—
08/03/09—pattie
Checking engine coolant level......8-9
Checking engine oil level .........8-10
Engine block heater ............5-81
Engine compartment check locations . . . 8-6
Engine cooling system ...........8-9
Engine oil .................. 8-10
Engine oil and oil filter
recommendation ..............9-6
Engine oil replacement indicator .....2-25
Engine oil viscosity .............9-6
Engine serial number ...........9-12
Engine specifications ............9-8
Engine start operation indicator .....2-23
If your vehicle overheats .........6-10
Starting the engine ............5-12
Engine coolant temperature gauge ......2-7
Entry/exit function, Automatic drive
positioner ................... .3-25
Event Data Recorders (EDR) ..........9-31
Exhaust gas (carbon monoxide) ........5-2
F
F.M.V.S.S./C.M.V.S.S. certification label . . .9-12
Filter Air cleaner housing filter .........8-19
Changing engine oil and filter ......8-11
Flashers
(See hazard warning flasher switch) .....2-40
Flat tire ..................... .6-2
Flat towing .................. .9-27
Floor mat cleaning ............... .7-5
Fluid Automatic transmission fluid (ATF) . . . .8-13
Brake fluid ................. 8-14Capacities and recommended fuel/
lubricants
..................9-2
Engine coolant ...............8-9
Engine oil .................. 8-10
Power steering fluid ............8-13
Window washer fluid ...........8-14
FM-AM-SAT radio with Compact Disc (CD)
player ..................... .4-61
Fog light switch ............... .2-40
Forward Collision Warning (FCW) system . . .5-61
Front passenger air bag and status light . .1-47
Front power seat adjustment ..........1-2
Front seat, Front seat adjustment .......1-2
Fuel Capacities and recommended fuel/
lubricants .................. .9-2
Fuel
economy ............... 5-68
Fuel economy information (display) ....4-9
Fuel octane rating .............9-4
Fuel recommendation ...........9-4
Fuel-filler cap ................ 3-18
Fuel-filler door ............... 3-18
Gauge ....................2-8
Fuses ..................... .8-22
Fusible links ................. .8-22
G
Garage door opener, HomeLink Universal
Transceiver .................. .2-60
Gascap .................... .3-18
Gauge ...................... .2-5
Gauge Engine coolant temperature gauge . . . .2-7
Fuel gauge ..................2-8 Odometer
..................2-6
Speedometer ................2-6
Tachometer .................2-7
Trip computer ............... 2-27
General maintenance ..............8-2
Glove box ................... .2-48
H
Hands-free phone system, Bluetooth
(with navigation system) ...........4-104
Hands-free phone system, Bluetooth
(without navigation system) .........4-115
Hazard warning flasher switch . . . . . . . .2-40
Head restraints ................. .1-6
Headlights Aiming control (See adaptive front
lighting system (AFS)) ...........2-38
Bulb replacement ............. 8-26
Headlight switch .............. 2-36
Xenon headlights ............. 2-35
Headphones (See INFINITI mobile
entertainment system) ........4-94 , 4-102
Heater Automatic climate control .........4-40
Engine block heater ............5-81
HomeLink Universal Transceiver . . . . . .2-60
Hood release ................. .3-16
Hook Coat
hooks................ .2-49
Luggage hook ............... 2-50
Horn ...................... .2-41
10-3
—
—
10/19/09—tbrooks
I
Ignition switch (Push-button) ..........5-9
Ignition switch, Automatic transmission
models ..................... .5-13
Immobilizer system .............. .2-31
In-cabin microfilter .............. .4-45
Indicator lights ................ .2-18
Indicator, Dot matrix display .........2-21
INFINITI Vehicle Immobilizer System .....2-31
INFINITI voice recognition standard
mode ..................... .4-130
INFINITI voice recognition system ......4-129
INFO button .................. .4-8
Inside mirror ................. .3-21
Inspection/maintenance (I/M) test ......9-30
Instrument brightness control ........2-39
Instrument panel ............... .2-4
Intelligent Brake Assist (IBA) off indicator
light ...................... .2-18
Intelligent Brake Assist (IBA) system .....5-64
Intelligent Cruise Control (ICC) system
(Full Speed Range) .............. .5-28
Intelligent Cruise Control (ICC) system
MAIN switch indicator .............2-24
Intelligent Cruise Control (ICC) system
warning light ................. .2-15
Intelligent cruise control (ICC) system,
Preview function ............... .5-49
Intelligent Key ................. .3-2
Intelligent Key battery discharge
indicator ................... .2-24
Intelligent Key insertion indicator ......2-23
Intelligent Key removal indicator .......2-23Intelligent Key system
.............3-6
Intelligent Key system Battery replacement ............8-23
Key operating range ............3-8
Key operation ................3-9
Warning light ................ 2-15
Warning signals .............. 3-11
Intelligent Key warning light ..........2-15
Interior light control switch ..........2-58
Interior light replacement ...........8-26
Interior lights ................. .2-58
iPod player
operation ............4-78
ISOFIX child restraint ............. .1-22
J
Jump starting .................. .6-7
K
Keyless entry
(See remote keyless entry system) ......3-13
Keys ....................... .3-2
Keys, For Intelligent Key system ........3-6
Labels Air bag warning labels ...........1-53
Air conditioner specification label ....9-13
Emission control information label . . . 9-12
Engine serial number ...........9-12
F.M.V.S.S./C.M.V.S.S. certification
label ..................... 9-12
Tire and Loading information label . . . 9-13
Vehicle identification number (VIN) . . . 9-11 L
Lane Departure Prevention (LDP) ON
indicator light ................. .2-19
Lane Departure Prevention (LDP) system . . .5-21
Lane departure warning (LDW) switch . . . .2-42
Lane departure warning (LDW) system . . . .5-19
Lane Departure Warning (LDW) system/Lane
Departure Prevention (LDP) system ......5-18
Lane departure warning chime . .......2-21
Lane departure warning light .........2-15
LATCH system ................. .1-22
License plate, Installing front license
plate ...................... .9-14
Lift gate .................... .3-16
Light Air bag warning light ............1-53
Bulb replacement ............. 8-25
Cargo light ................. 2-60
Fog light switch .............. 2-40
Headlight switch .............. 2-36
Headlights bulb replacement . . . . . . 8-26
Indicator lights ............... 2-18
Interior light control switch .......2-58
Interior lights ............... 2-58
Map lights ................. 2-58
Personal lights ............... 2-58
Vanity mirror lights ............2-59
Warning/indicator lights and audible
reminders .................. 2-13
Xenon
headlights ............. 2-35
Light replacement .............. .8-25
Lights, Exterior and interior light
replacement ................. .8-26
10-4
—
—
10/19/09—tbrooks