2010 HYUNDAI VERACRUZ oil pressure

[x] Cancel search: oil pressure

Page 16 of 425

HYUNDAI VERACRUZ 2010  Owners Manual 17
Introduction
INDICATOR SYMBOLS ON THE INSTRUMENT CLUSTER
Seat belt warning light
High beam indicator
Turn signal indicator
ABS warning light
Parking brake & Brake fluid
warning light
Engine oil pre

Page 142 of 425

HYUNDAI VERACRUZ 2010  Owners Manual Features of your vehicle
60 4
D150305AFD
Turn signal indicator
The blinking green arrows on the instru-
ment panel show the direction indicated
by the turn signals. If the arrow comes on
but does not

Page 298 of 425

HYUNDAI VERACRUZ 2010  Owners Manual Driving your vehicle
40 5
E110700AUN
Highway driving
Tires
Adjust the tire inflation pressures to
specification. Low tire inflation pressures
will result in overheating and possible
failure of the tir

Page 345 of 425

HYUNDAI VERACRUZ 2010  Owners Manual Maintenance
4 7
WARNING 
Be careful when checking your
engine coolant level when the
engine is hot. Scalding hot coolant
and steam may blow out under
pressure. This could cause burns
or other serious

Page 356 of 425

HYUNDAI VERACRUZ 2010  Owners Manual 715
Maintenance
G060200AEN-EU
Changing the engine oil and filter
Have engine oil and filter changed by an
authorized HYUNDAI dealer according to
the Maintenance Schedule at the begin-
ning of this sec

Page 369 of 425

HYUNDAI VERACRUZ 2010  Owners Manual Maintenance
28 7
G190200AUN
Battery recharging  
Your vehicle has a maintenance-free,
calcium-based battery.
 If the battery becomes discharged in a
short time (because, for example, the
headlights or

Page 381 of 425

HYUNDAI VERACRUZ 2010  Owners Manual Maintenance
40 7
Cold Tire  Pressure: The amount of
air pressure in a tire, measured in
pounds per square inch (psi) or kilo-
pascals (kPa) before a tire has built
up heat from driving.
Curb Weight: T

Page 391 of 425

HYUNDAI VERACRUZ 2010  Owners Manual Maintenance
50 7
Engine compartment main fuse panel
Description Fuse rating Protected component
IGN 1  40A  Ignition switch(ACC, IG1) 
IGN 2  40A  Start relay, Ignition switch(IG2, START) 
I/P B+1  50
Page:   1-8 9-16 next >