2010 HONDA PILOT width

µµ
Î
Î
ÎÎ
Î
ÎÎ
Î
ÎÎ
Î Î
Î
Î
Specif ications
538
Seating Capacities
Air Conditioning
Dimensions Capacities
Weights
1.98 US gal (7.5)2.48 US gal (9.4)
4.5 US qt (4.3)
4.2 US qt (4.0)
5.3 US qt (5.0)
190.9 in (4,850 mm) 78.5 in (1,995 mm)70.9 in (1,802 mm)21.00 US gal (79.5)
TotalFrontSecondThird 33 28
Refrigerant type Charge quantityLubricant type ND-OIL821.2 22.9 oz (600 650 g)HFC-134a (R-134a)
The GCWR must be reduced 2 percent for every 1,000 feet (305meters) of elevation.
See the tire information label atta-ched to the driver’s doorjamb.8,466 lbs (3,840 kg)
LengthWidthHeight
Wheelbase Track67.5 in (1,715 mm) 67.7 in (1,720 mm)109.3 in (2,775 mm)
Excluding the oil remaining in the engine0.196 US gal (0.74)
Including the coolant in the reserve tank and that remaining in the engineReserve tank capacity:
4.2 US qt (4.0)
Fuel tank
Engine coolantEngine oil
Automatic transmissionfluid
Rear differentialfluid (4WD)Transferassemblyfluid (4WD)Windshieldwasherreservoir6.9 US qt (6.5)
72.7 in (1,846 mm)
9,579 lbs (4,345 kg)
3.6 US qt (3.4)8.6 US qt (8.1)3.6 US qt (3.4)8.6 US qt (8.1)2.96 US qt (2.80)3.01 US qt (2.85)
0.45 US qt (0.43)0.48 US qt (0.45)
Gross vehicle weight rating
Gross combined weight rating (GCWR)
Approx.
FrontRear
1:
2:
U.S. vehicles Canadianvehicles
1 :2 : Except U.S. LX modelsU.S. LX models
2WD models
1:
2:3: 4WDmodels
2WD
4WD
Change TotalChangeIncludingfilterWithoutfilterTotalChangeTotalChangeTotalChangeTotal
Change Total
1
1 2
2 3
1
2
——
y
y
(/
yy
2010 Pilot

The tires on your vehicle meet all
U.S. Federal Saf ety Requirements.
All tires are also graded f or
treadwear, traction, and temperature
perf ormance according to
Department of Transportation
(DOT) standards. The f ollowing
explains these gradings.
The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices and dif f erences in
road characteristics and climate.
The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
All passenger car tires must conf orm
to Federal Saf ety Requirements in
addition to these grades.
Quality grades can be f ound where
applicable on the tire sidewall
between tread shoulder and
maximum section width. For
example:
Unif orm T ire Quality Grading
T readwearT raction
T readwear 200
Traction AA
Temperature A
DOT Tire Quality Grading (U.S. Vehicles)
540
——
y

y
(/
yy
2010 Pilot

µ
µ
µ
µ
µ
µ
µ
µ
µ
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Speed symbol (an
alphabetical code indicating
the maximum speed rating).
Whenever tires are replaced, they
should be replaced with tires of the
same size. The f ollowing is an
exampleof tiresizewithan
explanation of what each component
means.
Vehicletype(Pindicates
passenger vehicle).
Tire width in millimeters.
Aspect ratio (the tire’s section
height as a percentage of its
width).
Tire construction code (R
indicates radial).
Rim diameter in inches.
The tire identif ication number (TIN)
is a group of numbers and letters
that look like the f ollowing example.
TIN is located on the sidewall of the
tire.
This indicates that the tire
meets all requirements of
the U.S. Department of
Transportation.
Manuf acturer’s
identification mark.
P
R
DOT
B97R
245
65
17
105
T
Tire Labeling
Tire Size
T ire Ident if icat ion Number (T IN)
542
TIRE LABELING EXAMPLE
(1) (2)(3)(4)
Tire Size Tire Identification Number (TIN) Maximum Tire PressureMaximum Tire Load
(1)
(1)
(3) (2)(4)
DOT B97R FW6X 2202
P245/65R17 105T
——
y

y
(/
yy
2010 Pilot