2010 HONDA ODYSSEY deactivate

[x] Cancel search: deactivate

Page 26 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual CONT INUED
If the shoulder part of the belt is
pulled all the way out, the lockable
retractor will activate. The belt will
retract, but it will not allow the
passenger to move f reely.
To deactivate t

Page 40 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Together, airbags and
seat belts provide the best
protection.
Tampering could cause
the airbags to deploy, possibly
causing very serious injury. This could make the
driver’s seat position sensor or

Page 45 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µ
If a child
wraps a loose seat belt around
their neck, they can be seriously
or f atally injured. (See pages and for how to activate
and deactivate the lockable
retractor.)
This can prevent childre

Page 55 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual To deactivate the lockable retractor
and remove a child seat, unlatch the
buckle, unroute the seat belt, and let
the belt fully retract.Push and pull the child seat
f orward and f rom side-to-side to

Page 126 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µµµ
There are three settings you can
choose f rom:
OFF
The auto door lock mode is
deactivated all the time.
Press the SEL/RESET button. The
display changes as shown above.
Press the INFO button

Page 128 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual µ
µ
µ While the multi-information display
shows ‘‘DOOR·WINDOW SETUP,’’
press the SEL/RESET button on the
steering wheel. Then press the
INFO button once. The display
changes to ‘‘AU

Page 155 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Make sure the shif t lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and open the driver’s
door.
The auto door locking f eature has
three possible settings:
Your

Page 157 of 526

HONDA ODYSSEY 2010 RB3-RB4 / 4.G Owners Manual Locks all doors and tailgate when thevehicle’s speed reaches about 9 mph(15 km/h). On LX, EX, EX-L and Canadian DX
models
Make sure the shif t lever is in the
Park (P) position. Pushandholdthefronto
Page:   1-8 9-16 next >