2010 HONDA INSIGHT back lights

Open the hood.
To change the bulb on the right
side, remove the upper part of the
windshield washer reservoir tank.
Use a f lat-tipped screwdriver to
remove the holding clip, then
remove the upper part by pulling it
straight up.Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Install the upper part of the
windshield washer reservoir tank
in the reverse order of removal. (Right side)
6.
1. 2.
3.4.
5.
Lights
Replacing a Front Parking Light
Bulb
362
BULB
HOLDING CLIP
SOCKET
—
—y

y
)"yy
2010 Insight

Place a cloth on the edge of the
light assembly garnish. Remove
the cover by caref ully prying in
the notch on its lef t edge with a
f lat-tipped screwdriver.Remove the socket f rom the f ront
turn signal light assembly by
turning it one-quarter turn
counterclockwise.Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
f ront turn signal light assembly.
Turn it clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Install the light assembly in the
reverse order of removal. Make
sure to secure the bolt.
Install the garnish in the original
position securely.
Remove the bolt and pull the f ront
turn light assembly f rom the
bumper while taking the tab out
f rom the holder. 5.
6.
1. 7.
8.
3. 4.
2.
Lights
Replacing the Front T urn Signal
Light Bulb
Maint enance
363
TAB
BOLT
GARNISH
NOTCH
BULB
—
—y

y
)"yy
2010 Insight

Open the hood.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
2. 3.
4.
5.
1.
Lights
Replacing a Front Side Marker
Light Bulb
364
BULB
SOCKET
—
—y

y
)"yy
2010 Insight

Remove the two mounting bolts
with an 8 mm wrench.Pull the rear of the light assembly
out as shown in the illustration
above ( ), then push the
assembly back to the original
position caref ully ( ). The f ront
part of the rear light assembly
raises slightly ( ).
Determine which of the three
bulbs is burned out: back-up light,
turn signal, or side marker.Pull the whole light assembly
outwards f rom the body caref ully.
Remove the socket by turning it
one-quarter turn counterclockwise.
Remove the burned out bulb by
pulling it straight out of its socket.
6.
7.
5.
8.
9.
10.
Lights
366
BOLT
ORIGINAL
POSITIONFront
Front
Left side BULBSOCKET SNAP FASTENERS
Left side
—
—y


y
)"y
y
2010 Insight

Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
Reinstall the socket into the light
assembly. Turn it clockwise to
lock it in place.
Testthelightstomakesurethe
new bulb is working.
When reinstalling the taillight
assembly, align and pop the snap
f asteners in place. Reinstall and
tighten the two mounting bolts. To reinstall the trim, set thebottom edge of the trim in the
original position and push the
bottom half of the trim to clip it
back securely. Then push the
upperhalfofthetrimtosecure
the top clip.Secure the hooks by pushing on
the areas of the trim as shown in
the illustration above.
11.
12.
13.
14.
15.16.
Lights
Maint enance
367
—
—y

y
)"yy
2010 Insight

If necessary, add oil to bring the
level back to the full mark on the
dipstick (see page ).The engine running generates the oil
pressure. When the Auto Idle Stop is
activated, the engine is stopped, the
oil pressure is dropped, and the low
oil pressure indicator does not come
on.
Saf ely pull of f the road, and shut
of f the engine. Turn on the hazard
warning lights.
Let the vehicle sit f or a minute.
Open the hood, and check the oil
level (see page ). An engine
very low on oil can lose pressure
during cornering and other driving
maneuvers.
Start the engine and watch the oil
pressure indicator. If it does not go
out within 10 seconds, turn of f the
engine. There is a mechanical
problem that needs to be repaired
bef ore you can continue driving
(see
on page
).
This indicator should never
come on when the engine is
running. If it starts f lashing or stays
on, the oil pressure has dropped very
low or lost pressure. Serious engine
damage is possible, and you should
take immediate action.
You will also see a ‘‘CHECK
ENGINE OIL LEVEL’’ message on
the multi-information display when
this indicator comes on. 1.
2.
3.
4.
288
348
412
L ow Oil Pressure Indicator
Emergency T owing
T aking Care of t he Unexpect ed
401
Running the engine with low oil
pressure can cause serious mechanical
damage almost immediately. Turn of f
the engine as soon as you can saf ely get
the vehicle stopped.
—
—y


y
)"yy
2010 Insight

µµµ
µ
µ
Î
Î µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
Î
Î Î Î
Î
Î
Specif ications
Technical Inf ormation
419
Air Conditioning
Tires Alignment Fuses 12 Volt Battery
Lights HFC-134a (R-134a)
15.8 17.6 oz (450 500 g) SP-10
12 V 60 W
Refrigerant type
Charge quantity
Lubricant oil type
12 V 55 W
Size
Pressure Toe-in
Camber
Caster Interior
Under-hood
60 psi (420 kPa , 4.2 kgf/cm
)
33 psi (230 kPa , 2.3 kgf/cm)
175/65R15 84S 3°20’
1°
0°
0.1 in (2.5 mm)
0.00 in (0.0 mm)
Capacity
12 V
12 V 35 AH/20 HR
28 AH/5 HR
12 V 21 W
T135/80D15 99M
12 V 5 W
See page
410or the fuse label
attached to the inside of the fuse
box door under the steering
column.
See page 411or the fuse box
cover.
Headlights
Front turn signal lights
Front parking lights
Front side marker lights
Side turn signal lights
(door mirror)
Rear turn signal lights
Stop/taillights
Back-up lights
Rear side marker lights
License plate lights
Spot lights
Ceiling light
Cargo area light
High-mount brake light
Glove box light
12 V 3.4 W12 V 12 V
12 V
12 V
12 V
12 V
5W
8W
8W
5W
2CP
16 W
12 V 21 W
Replacement of a light bulb should be done by your dealer. 5W
12 V
Front
Rear
Front
Rear
Front
High
Low
Front/Rear
Spare
Front/Rear
Spare
1:
2: (HB3)
(H11)
(Amber)
LED type
LED type
LED type
EX models (Amber)
1
1 1 2
2
2
—
—y

y
)"yy
2010 Insight

.............................
Braking System .324
.................
Break-in, New Vehicle . 284
Brightness Control, ...............................
Instruments .121
Bulb Replacement ..........................
Back-up Lights .365
..............................
Brake Lights .365
........
Front Side Marker Lights . 364
.........
Front Turn Signal Lights . 363
.................................
Headlights .359
..........................
Parking Lights .362
..........
Rear Turn Signal Lights . 365
............................
Specif ications .419
..............................
Bulbs, Halogen .359
.........................................
Card, PC .215
.........................
Cargo Area Cover .150
..........................
Cargo Area Light .158
............................
Capacities Chart .418
.............
Carbon Monoxide Hazard . 56
.............................
Carrying Cargo .295
.............
CAUTION, Explanation of . iii
..................................
Ceiling Light .157
...............................
Center Pocket .155 ...................................
Center Tray .155
........................
Certif ication Label .416
............................................
Chains .379
....................
Changing a Flat Tire .387
Changing Oil ........................................
How to .350
......................................
When to .337
...
Charging System Indicator . 63,402
............
Checklist, Bef ore Driving . 302
.....................................
Child Saf ety . 38
Child Seats .............
LATCH Anchor System . 47
.............................
Lower Anchor . 47
............................
Tether Anchor . 50
................
Childproof Door Locks . 131
.............................
Climate Control .160
.........................
Clock, Setting the .254
........................
CO in the Exhaust .425
............
Cold Weather, Starting in . 303
..............................
Compact Spare .386
.................
Console Compartment . 154
.............
Controls, Instruments and . 59
Coolant ........................................
Adding .353
....................................
Checking .289
.........................
Proper Solution .353 ...............
Temperature Indicator . 67
Crankcase Emissions Control ........................................
System .425
............
Cruise Control Operation . 256
.........................
Customer Service .432
...............
DANGER, Explanation of . iii
...................................
Dashboard .3, 60
..............
Daytime Running Lights . 120
............
Def ects, Reporting Saf ety . 434
..............
Def ogger, Rear Window . 123
..............
Def rosting the Windows . 163
....................................
Dimensions .418
.............
Dimming the Headlights . 119
Dipstick ..........
Automatic Transmission . 356
..................................
Engine Oil .288
........................
Directional Signals .118
Disc Brake Pad Wear ...................................
Indicators .325
............................
Disc Player .173, 204
.....................
Disposal of Used Oil .352
Index
C D
II
—
—y

y
)"yy
2010 Insight