2010 HONDA ELEMENT jump start

[x] Cancel search: jump start

Page 1 of 342

HONDA ELEMENT 2010 1.G Owners Manual A
Accessories andModifications .......................... 205
ACCESSORY (Ignition Key Position) ................................... 79
Accessory Power Sockets ..........100
Additives, Engine Oil .....

Page 3 of 342

HONDA ELEMENT 2010 1.G Owners Manual Cup Holders................................. 99
Customer Service .......................322
D
DANGER, Explanation of .............iii
Dashboard ............................... 3, 56
Daytime Running Li

Page 6 of 342

HONDA ELEMENT 2010 1.G Owners Manual Infant Seats.................................. 40
Tether Anchorage Point ...........48
Inflation, Proper Tire ..................271
Recommended Pressures .......272
Inside Mirror .....................

Page 17 of 342

HONDA ELEMENT 2010 1.G Owners Manual Your Vehicle at a Glance(main controls).................................................................................................................... 3
Driver and Passenger Safety (seat belts, S

Page 297 of 342

HONDA ELEMENT 2010 1.G Owners Manual This section covers the more 
common problems that motorists 
experience with their vehicles. It 
gives you information about how to 
safely evaluate the problem and what 
to do to correct it. If the

Page 305 of 342

HONDA ELEMENT 2010 1.G Owners Manual Diagnosing why the engine wont 
start falls into two areas, depending
on what you hear when you turn the
ignition switch to the START (III) position:● You hear nothing, or almost 
nothing. The engi

Page 307 of 342

HONDA ELEMENT 2010 1.G Owners Manual Although this seems like a simple 
procedure, you should take severalprecautions.
A battery can explode if you do 
not follow the correct
procedure, seriously injuring
anyone nearby. 
Keep all sparks,

Page 308 of 342

HONDA ELEMENT 2010 1.G Owners Manual 3. Connect one jumper cable to thepositive ( +) terminal on your
battery. Connect the other end to 
the positive ( +) terminal on the
booster battery.4. Connect the second jumper cable to the nega