2010 HONDA CR-V open hood

[x] Cancel search: open hood

Page 4 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual .................
Folding Rear Seat . 105, 107
..........................
Four-way Flashers . 79
............................
Front Airbags . 10, 26 
Front Seat
................................
Adjust

Page 279 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual If equipped
Once the security system is set, 
opening any door without using the
key or the remote transmitter, the
hood, or the tailgate will cause the
system to alarm.Use the remote transmitter
to q

Page 308 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Bef ore you begin driving your 
vehicle, you should know what
gasoline to use and how to check the 
levels of important f luids. You also 
need to know how to properly store
luggage or packages. The
i

Page 312 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual To close the hood, lif t it up slightly to 
remove the support rod f rom the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a f oot (30 cm) above the
f ender, then let i

Page 365 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Your vehicle does not require any oil 
additives. Additives may adversely
af f ect the engine or transmission
perf ormance and durability.Run the engine until it reaches
normal operating temperature,

Page 374 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual CONT INUED
Theheadlightswereproperlyaimed 
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustmentsshouldbedonebyyou

Page 376 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Insert the socket back into the 
headlight assembly. Turn it
clockwise to lock it in place. 
Turn on the lights to make sure 
the new bulb is working. 
(Driver’s side) 
Reinstall the coolant reserve

Page 377 of 441

HONDA CR-V 2010 RD1-RD5, RE7 / 3.G Owners Manual Insert the socket back into the 
headlight assembly. Turn it
clockwise to lock it in place. 
Turn on the lights to make sure 
the new bulb is working. 
Reinstall the f use box in place 
securely.
(Dri
Page:   1-8 9-16 next >