2010 HONDA ACCORD SEDAN width

µµ
Î
Î
ÎÎÎ
Î
Î Î
Specif ications (4-cylinder models)
380
DimensionsSeating Capacities
Capacities
Weights
Air Conditioning
Engine
110.2 in (2,800 mm) 62.6 in (1,590 mm)
LengthWidthHeightWheelbaseTrack
194.1 in (4,930 mm)72.7 in (1,847 mm)58.1 in (1,475 mm)
4.8 US qt (4.5)2.6 US qt (2.5)
6.9 US qt (6.5)2.6 US qt (2.5)2.1 US qt (2.0)2.0 US qt (1.9)5.4 US qt (5.1)4.0 US qt (3.8)4.2 US qt (4.0)
1.88 US gal (7.1)1.90 US gal (7.2)
1.56 US gal (5.9)1.59 US gal (6.0)
523
62.2 in (1,580 mm)
TotalFrontRear
Fuel tank
Engine coolant
Engine oil
Manual trans- mission fluidAutomatictransmissionfluidWindshieldwasherreservoirIncluding the coolant in the reserve tank and that remaining in theengineReserve tank capacity: 0.180 US gal (0.68)Excluding the oil remaining in the engine
Gross vehicle weight rating See the certification label attachedto the driver’s doorjamb.
Refrigerant typeCharge quantityLubricant type
HFC-134a (R-134a)14.1 15.9 oz (400 450 g)ND-OIL8
Water cooled 4-strokeDOHC i-VTEC 4-cylindergasoline engine3.43 x 3.9 in (87.0 x 99.0 mm)144 cu-in (2,354 cm)10.5 : 1ILZKR7B11SSXU22HCR11S
Type
BorexStroke DisplacementCompression ratioSpark plugs (U.S.)
Spark plugs (Canada)SXU22HCR11S ILZKR7B11SDILZKR7A11GS
18.5 US gal (70.0)Approx.
ChangeManual AutomaticTotalManualAutomatic
1:
2:
NGK: DENSO:
ChangeIncluding filterWithout filterTotalChangeTotalChangeTotal
U.S. Canada
Front/Rear
ULEV PZEV
1: 2: EX,EX-L
NGK:NGK:DENSO:
LX, LX-P1
2
1 2
09/07/08 21:45:28 31TA5620_385
2010 Accord Sedan

µµ
Î
Î
Î
Î
Specif ications (V6 models)
382
DimensionsSeating Capacities
Capacities
Weights
Air Conditioning
Engine
110.2 in (2,800 mm)
Length WidthHeightWheelbaseTrack
194.3 in (4,936 mm)72.7 in (1,847 mm)58.1 in (1,475 mm)
62.2 in (1,580 mm)
Total FrontRear
523
Fuel tank
Engine coolantEngine oil
Automatic transmissionfluidWindshieldwasherreservoir
1.74 US gal (6.6)2.27 US gal (8.6)
4.5 US qt (4.3)
5.3 US qt (5.0)3.5 US qt (3.3)7.9 US qt (7.5)
2.6 US qt (2.5)4.8 US qt (4.5)
Including the coolant in the reserve tank and that remaining in theengineReserve tank capacity:Excluding the oil remaining in the engine0.180 US gal (0.68)
Gross vehicle weight rating See the certification label attachedto the driver’s doorjamb.
Refrigerant typeCharge quantityLubricant type
HFC-134a (R-134a)14.1 15.9 oz (400 450 g)ND-OIL8
3.50 x 3.66 in (89.0 x 93.0 mm)212 cu-in (3,471 cm)10.5 : 1ILZKR7B11SXU22HCR11
18.5 US gal (70.0)
Water cooled 4-strokeSOHC i-VTEC 6-cylinder (V6)gasoline engine
4.2 US qt (4.0)
Type
BorexStroke DisplacementCompression ratioSpark plugs (U.S.)
Spark plugs (Canada)ILZKR7B11SXU22HCR11
Approx.
1:
2:
ChangeIncluding filter Without filterTotalChangeTotal
U.S. Canada
Change Total
Front/Rear
NGK:DENSO:NGK:DENSO:
2
1
——
y

y
)yy
2010 Accord Sedan

Quality grades can be f ound where
applicable on the tire sidewall
between tread shoulder and
maximum section width. For
example:
The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices and dif f erences in
road characteristics and climate.
The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
The tires on your vehicle meet all
U.S. Federal Saf ety Requirements.
All tires are also graded f or
treadwear, traction, and temperature
perf ormance according to
Department of Transportation
(DOT) standards. The f ollowing
explains these gradings.
All passenger car tires must conf orm
to Federal Saf ety Requirements in
addition to these grades.
Unif orm T ire Quality Grading
T readwear 200
Traction AA
Temperature A
T readwearT raction
DOT Tire Quality Grading (U.S. Vehicles)
384
——
y

y
)yy
2010 Accord Sedan

µ
µ
µ
µ
µ
µ
µ
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
Vehicletype(Pindicates
passenger vehicle).
Tire width in millimeters.
Aspect ratio (the tire’s section
height as a percentage of its
width).
Tire construction code (R
indicates radial).
Rim diameter in inches.
Speed symbol (an
alphabetical code indicating
the maximum speed rating).
P
R
V
225
50
93
17
Tire Labeling
Tire Size
386
(3)
(4)
Tire Labeling Example
(1)
(2)
(1)
(2) (3)(4)
(1) Tire SizeTire Identification Number (TIN) Maximum Tire Pressure Maximum Tire Load
P225/50R17 93V
——
y

y
)y
y
2010 Accord Sedan