2010 HONDA ACCORD oil additives

CONT INUED
BatteryCharging System ...........................
Indicator . 56, 365
............................
Jump Starting . 360
..............................
Maintenance . 347
....................
Specif ications . 381, 383
..............................
Bef ore Driving . 255
....................................
Belts,Seat .8,18
.........................
Beverage Holders . 111
........
HandsFreeLink. 230
..................................
Booster Seats . 48
Brakes
...........
Anti-lock System (ABS) . 287
.............
Break-in, New Linings . 256
....................
Bulb Replacement . 330
...........................................
Fluid . 322
.......................................
Parking . 109 .................
System Indicator . 57, 367
........................
Wear Indicators . 286
.............................
Braking System . 286
.................
Break-in, New Vehicle . 256
..
Brightness Control, Instruments . 72
Bulb Replacement
..........................
Back-up Lights . 330
..............................
Brake Lights . 330
.................................
Fog Lights . 332
................
Front Parking Lights . 328
.................................
Headlights . 325
.........
High-mount Brake Light . 331
................................
Rear Lights . 330
....................
Specif ications . 381, 383
............
Turn Signal Lights . 328, 330
......................
Bulbs, Halogen . 325, 332
....................................
Accessories . 267
ACCESSORY
...............
(Ignition Key Position) . 78
............
Accessory Power Sockets . 111
..................
Active Head Restraints . 96
....................
Additives, Engine Oil . 313
...........................
Advanced Airbags . 25
...............................
Airbag (SRS) . 9, 21
..........
Airbag System Components . 21
......
Air Conditioning System . 120, 125
.................................
Usage . 123, 126
...............
Air Pressure, Tires . 339, 340
......................................
Antif reeze . 316
Anti-lock Brakes (ABS)
...............................
Indicator . 58, 287
...................................
Operation . 287
..............
Anti-thef t, Audio System . 213
.
Anti-thef t Steering Column Lock . 78
................................
Audio System . 133
.....
Auto Door Locking/Unlocking . 80
...
Automatic Seat Belt Tensioners . 19
.............
Automatic Speed Control . 223
..............
Automatic Transmission . 280
..................
Capacity, Fluid . 380, 382 .......................................
Shif ting . 280
Shif t Lever Position
...............................
Indicators . 280
................
Shif t Lever Positions . 280
....................
Shif t Lock Release . 283
......................
Auxiliary Input Jack . 212
...................
Capacities Chart . 380, 382
.............
Carbon Monoxide Hazard . 51
.............................
Carrying Cargo . 269
.............
CAUTION, Explanation of . iii
.........................................
CD Care . 206Bluetooth
Index
A
B
C
INDEX
I
——
y


y
)yy

Help assure your vehicle’s f uture
reliability and perf ormance by paying
extra attention to how you drive
during the f irst 600 miles (1,000 km).
During this period:Avoid full-throttle starts and rapid
acceleration.
Do not change the oil until the
scheduled maintenance time.
Avoidhardbrakingforthefirst
200 miles (300 km).
Do not tow a trailer.
You should also f ollow these
recommendations with an
overhauled or exchanged engine, or
when the brakes are replaced. Your vehicle is designed to operate
on unleaded gasoline with a pump
octane number of 87 or higher. Use
of a lower octane gasoline can cause
a persistent, heavy, metallic rapping
noise that can lead to engine damage.
Use of gasoline with these additives
may adversely af f ect perf ormance,
and cause the malfunction indicator
lamp on your instrument panel to
come on. If this happens, contact
your dealer f or service.
In addition, in order to maintain good
perf ormance, f uel economy, and
emissions control, we strongly
recommend, in areas where it is
available, the use of gasoline that
does NOT contain manganese-based
f uel additives such as MMT.
We recommend using quality
gasolines containing detergent
additives that help prevent fuel
system and engine deposits.
You may hear a knocking noise from
the engine if you drive the vehicle at
low engine speed (below about 1,000
rpm) in a higher gear. To stop this,
raise the engine speed by shif ting to
a lower gear.
On models with manual transmission
Break-in Period, Fuel Recommendation
Break-in Period Fuel Recommendation
256
——
y
y
)y
y
Table of Contents

Honda Motor Oil is the pref erred
5W-20 lubricant f or your vehicle. It is
highly recommended that you use
Honda Motor Oil in your vehicle f or
optimum engine protection. Make
sure the API Certif ication Seal says
‘‘For Gasoline Engines.’’Your vehicle does not require any oil
additives. Additives may adversely
af f ect the engine or transmission
perf ormance and durability.
The oil viscosity or weight is
provided on the container’s label.
5W-20 oil is f ormulated f or year-
round protection of your vehicle to
improve cold weather starting and
f uel economy.
You may use a synthetic motor oil if
it meets the same requirements
given f or a conventional motor oil: it
displays the API Certif ication Seal,
and it is the proper weight. You must
f ollow the oil and f ilter change
intervals shown on the information
display.
Synthetic Oil
Engine Oil A dditives
A dding Engine Oil
Maint enance
313
API CERTIFICATION SEAL
Ambient Temperature
——
y

y
)y
y
Table of Contents

Check the f luid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground.Reinstall the under cover and put the
holding clips back in place. Make
sure the under cover is installed
under the edge of the f ront bumper.
If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certif ication Seal that says ‘‘FOR
GASOLINE ENGINES’’ as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stif f er shif ting. Replace as
soon as it is convenient.
The transmission should be drained
and ref illed with new f luid according
to the maintenance minder (see page
).
If you are not sure how to check and
add f luid, contact your dealer.
Remove the transmission f iller bolt,
and caref ully f eel inside the bolt hole
with your f inger.
The f luid level should be up to the
edge of the bolt hole. If it is not, add
Honda Manual Transmission Fluid
(MTF) until it starts to run out of the
hole. Reinstall the f iller bolt, and
tighten it securely.
To check the transmission f luid level,
remove the under cover holding clips
with a flat-tip screwdriver, then
remove the under cover caref ully. 303
4-cylinder models
T ransmission Fluid
Manual Transmission
Maint enance
321
Correct levelFILLER BOLT
CLIP UNDER COVER
——
y
y
)yy
Table of Contents