2010 FORD TAURUS spare wheel

[x] Cancel search: spare wheel

Page 220 of 378

FORD TAURUS 2010 6.G Owners Manual When your temporary spare tire is installed
When one of your road tires needs to be replaced with the temporary
spare, the TPMS system will continue to identify an issue to remind you
that the damaged

Page 221 of 378

FORD TAURUS 2010 6.G Owners Manual Low Tire
Pressure
Warning LightPossible
causeCustomer Action Required
Flashing
Warning LightSpare tire in
useYour temporary spare tire is in use.
Repair the damaged road wheel and
re-mount it on the v

Page 270 of 378

FORD TAURUS 2010 6.G Owners Manual ability to anticipate wheel slip and transfer torque to the rear wheels
before slip occurs. The AWD system is active all the time and requires no
input from the operator.
All components of the AWD sys

Page 287 of 378

FORD TAURUS 2010 6.G Owners Manual Fuse/Relay
LocationFuse Amp
RatingPower Circuits
58 — Not used
59 Half ISO relay Left halogen headlamp relay
60 Half ISO relay Right halogen headlamp relay
61 — Not used
62 — Not used
63 Half IS

Page 288 of 378

FORD TAURUS 2010 6.G Owners Manual Dissimilar spare tire/wheel information
WARNING:Failure to follow these guidelines could result in an
increased risk of loss of vehicle control, injury or death.
If you have a dissimilar spare tire/wh

Page 289 of 378

FORD TAURUS 2010 6.G Owners Manual 3.Full-size dissimilar spare without label on wheel
When driving with the full-size dissimilar spare tire/wheel,do not:
•Exceed 70 mph (113 km/h)
•Use more than one dissimilar spare tire/wheel at

Page 290 of 378

FORD TAURUS 2010 6.G Owners Manual Stopping and securing the vehicle
1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
and turn engine off.
Removing the spare tire and

Page 292 of 378

FORD TAURUS 2010 6.G Owners Manual 3. Put the jack in the jack notch
next to the tire you are changing.
Turn the jack handle clockwise until
the wheel is completely off the
ground.
Note: DO NOT LIFT ON THE
PLASTIC MOLDING, as this coul
Page:   < prev 1-8 9-16 17-24 next >