2010 FORD SUPER DUTY maintenance

[x] Cancel search: maintenance

Page 3 of 407

FORD SUPER DUTY 2010 2.G Owners Manual Customer Assistance 337
Reporting safety defects (U.S. only) 343
Reporting safety defects (Canada only) 343
Cleaning 344
Maintenance and Specifications 354
Engine compartment 356
Engine oil 359
Batter

Page 6 of 407

FORD SUPER DUTY 2010 2.G Owners Manual Do not add friction modifier compounds or special break-in oils since
these additives may prevent piston ring seating. SeeEngine oilin the
Maintenance and Specificationschapter for more information on

Page 15 of 407

FORD SUPER DUTY 2010 2.G Owners Manual bulbs work. If any light remains on after starting the vehicle, refer to the
respective system warning light description for additional information.
Note:Some warning lights are
reconfigurable telltal

Page 17 of 407

FORD SUPER DUTY 2010 2.G Owners Manual Engine oil pressure:Illuminates
when the oil pressure falls below the
normal range. Refer toEngine oil
in theMaintenance and
Specificationschapter.
Low tire pressure warning (if
equipped):Illuminates

Page 18 of 407

FORD SUPER DUTY 2010 2.G Owners Manual Check fuel cap (RTT):Displays
when the fuel cap may not be
properly installed. Continued driving
with this light on may cause the
Service engine soon warning light to
come on. Refer toFuel filler capi

Page 24 of 407

FORD SUPER DUTY 2010 2.G Owners Manual Fuel gauge:Indicates
approximately how much fuel is left
in the fuel tank (when the ignition
is in the on position). The fuel
gauge may vary slightly when the
vehicle is in motion or on a grade.
The F

Page 26 of 407

FORD SUPER DUTY 2010 2.G Owners Manual DTE is calculated using a running average fuel economy, which is based
on your recent driving history of 500 miles (800 km). This value is not
the same as the average fuel economy display. The running

Page 29 of 407

FORD SUPER DUTY 2010 2.G Owners Manual •Some messages will reappear after clearing or being reset if a problem
or condition is still present and needs your attention.
•Some messages can be acknowledged and reset by pressing the
SELECT/
Page:   1-8 9-16 17-24 25-32 33-40 ... 80 next >