2010 FORD RANGER bulb

WARNING:Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base
and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.
Install the new bulb(s) in reverse order.
Replacing front sidemarker bulbs
1. Turn the headlamp switch to the
off position, then open the hood.
2. At the back of the headlamp, pry
up the two retainer pins to release
the headlamp assembly from the
vehicle and pull headlamp forward.
3. Remove bolt(s) from lamp
assembly and disengage lamp
assembly.
Lights
51
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

4. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
5. Carefully pull bulb straight out of
socket and push in the new bulb.
6. Install the bulb socket in lamp
assembly by turning clockwise.
Install the new bulb in reverse
order.
Replacing tail lamp/backup lamp bulbs
1. Make sure the headlamp switch is
in the off position, then open the
tailgate to expose the lamp
assemblies.
2. Remove the four screws and the
lamp assembly from vehicle.
Lights
52
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

3. Rotate bulb socket
counterclockwise turn and remove
from lamp assembly.
4. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse
order.
Replacing fog lamp bulbs (if equipped)
1. Make sure the headlamp switch is
in the off position and remove the
bulb socket from the fog lamp by
turning it counterclockwise.
2. Disconnect the electrical
connector.
Install the new bulb in reverse
order.
Replacing high-mount brakelamp bulb
1. Make sure the headlamp switch is
in the off position and remove the
two screws and lamp assembly from
vehicle.
2. Remove the bulb socket from
lamp assembly by rotating it counterclockwise.
3. Carefully pull bulb straight out of socket.
Install the new bulb in reverse order.
Lights
53
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

Replacing license plate lamp bulbs
1. Make sure the headlamp switch is
in the off position and reach behind
the rear bumper to locate the bulb
socket.
2. Twist the socket counterclockwise
and remove.
3. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse
order.
Lights
54
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

AdvanceTrac
Features
Button functions
icon
statusRSC
ESC TCS
Default at start-upIlluminated
during bulb
checkEnabled Enabled Enabled
Button pressed
momentarilyIlluminated
solidEnabled Enabled Disabled
Button pressed and
held more than
5 seconds (speed
under 35 mph)Flashes
then
illuminated
solidDisabled Disabled Disabled
Button pressed and
held less than
5 seconds (speed
over 35 mph)Illuminated
solidEnabled Enabled Enabled
Button pressed
again after
deactivationNot
illuminatedEnabled Enabled Enabled
Transfer case in 4L
(4WD Low)Illuminated
solidDisabled Disabled Disabled
STEERING
To help prevent damage to the power steering system:
•Never hold the steering wheel at its furthest turning points (until it
stops) for more than a few seconds when the engine is running.
•Do not operate the vehicle with a low power steering fluid level
(below the MIN mark on the reservoir).
•Some noise is normal during operation. If the noise is excessive, check
for a low power steering fluid level before seeking service by your
authorized dealer.
•Heavy or uneven steering efforts may be caused by a low power
steering fluid level. Check for a low power steering fluid level before
seeking service by your authorized dealer.
•Do not fill the power steering fluid reservoir above the MAX mark on
the reservoir.
Driving
171
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

4. Driving through deep water—the electrical system may be wet.
These temporary malfunctions can be corrected by filling the fuel tank
with good quality fuel, properly tightening the fuel cap or letting the
electrical system dry out. After three driving cycles without these or any
other temporary malfunctions present, the service engine soon
indicator should stay off the next time the engine is started. A driving
cycle consists of a cold engine startup followed by mixed city/highway
driving. No additional vehicle service is required.
If the service engine soon
indicator remains on, have your vehicle
serviced at the first available opportunity. Although some malfunctions
detected by the OBD-II may not have symptoms that are apparent,
continued driving with the service engine soon
indicator on can
result in increased emissions, lower fuel economy, reduced engine and
transmission smoothness, and lead to more costly repairs.
Readiness for Inspection/Maintenance (I/M) testing
Some state/provincial and local governments may have
Inspection/Maintenance (I/M) programs to inspect the emission control
equipment on your vehicle. Failure to pass this inspection could prevent
you from getting a vehicle registration. Your vehicle may not pass the I/M
test if the service engine soon
indicator is on or not working
properly (bulb is burned out), or if the OBD-II system has determined
that some of the emission control systems have not been properly
checked. In this case, the vehicle is considered not ready for I/M testing.
If the service engine soon
indicator is on or the bulb does not
work, the vehicle may need to be serviced. Refer to the On board
diagnostics (OBD-II) description in this chapter.
If the vehicle’s engine or transmission has just been serviced, or the
battery has recently run down or been replaced, the OBD-II system may
indicate that the vehicle is not ready for I/M testing. To determine if the
vehicle is ready for I/M testing, turn the ignition key to the on position
for 15 seconds without cranking the engine. If the service engine
soon
indicator blinks eight times, it means that the vehicle is not
ready for I/M testing; if the service engine soon
indicator stays on
solid, it means that the vehicle is ready for I/M testing.
Maintenance and Specifications
260
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

A
ABS (see Brakes) .....................164
AdvanceTrac ..............................167
Air cleaner filter ...............266–267
Airbag supplemental restraint
system ....................................90, 98
and child safety seats ..............92
description ..........................90, 98
disposal ....................................100
driver airbag ..................90, 93, 99
indicator light ...................98, 100
operation .......................90, 93, 99
passenger airbag ...........90, 93, 99
side airbag .................................98
Ambulance packages ....................7
Antifreeze
(see Engine coolant) ................244
Anti-lock brake system
(see Brakes) ......................164–165
Anti-theft system ........................66
Audio system
(see Radio) ......................19, 21, 26
Automatic transmission ............174
driving an automatic
overdrive .................................174
fluid, refill capacities ..............268
fluid, specification ..................268
Auxiliary input jack (Line in) ....32
Auxiliary power point .................56
Axle
lubricant specifications ..........268
refill capacities ........................268
B
Battery .......................................242
acid, treating emergencies .....242jumping a disabled battery ....210
maintenance-free ....................242
replacement, specifications ...267
servicing ..................................242
Belt-Minder
...............................85
Booster seats .............................114
Brakes ........................................164
anti-lock ...........................164–165
anti-lock brake system (ABS)
warning light ...........................165
fluid, checking and adding ....262
fluid, refill capacities ..............268
fluid, specifications .................268
lubricant specifications ..........268
parking ....................................166
shift interlock ..........................173
Bulbs ............................................48
C
Capacities for refilling fluids ....268
Cell phone use ..............................9
Changing a tire .........................201
Child safety seats ......................105
attaching with tether straps ..110
in front seat ............................106
in rear seat ......................106, 109
LATCH .....................................110
recommendations ...................103
Child safety seats - booster
seats ...........................................114
Cleaning your vehicle
engine compartment ..............227
instrument panel ....................229
interior .....................................230
plastic parts ............................228
safety belts ..............................230
washing ....................................225
waxing .....................................226
Index
281
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)

preparing to drive your
vehicle .....................................172
Fuel ............................................250
calculating fuel economy .......255
cap ...........................................252
capacity ...................................268
choosing the right fuel ...........253
comparisons with EPA fuel
economy estimates .................258
detergent in fuel .....................254
filling your vehicle with
fuel ...........................250, 252, 255
filter, specifications ........250, 267
fuel pump shut-off switch .....190
improving fuel economy ........255
octane rating ...................254, 272
quality ......................................254
running out of fuel .................254
safety information relating to
automotive fuels .....................250
Fuel pump shut-off switch .......190
Fuses ..................................190–191
G
Gas cap (see Fuel cap) ............252
Gas mileage
(see Fuel economy) .................255
Gauges .........................................16
H
Hazard flashers .........................189
Headlamps ...................................44
aiming ........................................46
bulb specifications ....................49
daytime running lights .............45
flash to pass ..............................45
high beam .................................44
replacing bulbs .........................50turning on and off ....................44
Heating
heating and air conditioning
system .................................41–42
Hood ..........................................233
I
Ignition ...............................159, 272
Infant seats
(see Safety seats) .....................105
Inspection/maintenance (I/M)
testing ........................................260
Instrument panel
cleaning ...................................229
cluster ........................................12
lighting up panel and
interior .......................................45
J
Jack ............................................201
positioning .......................201, 206
storage .....................201, 203–204
Jump-starting your vehicle ......210
K
Keys .......................................62, 67
positions of the ignition .........159
L
Lamps
bulb replacement
specifications chart ..................49
daytime running light ...............45
fog lamps ...................................44
headlamps .................................44
headlamps, flash to pass ..........45
Index
283
2010 Ranger(ran)
Owners Guide, 1st Printing
USA(fus)