2010 FORD KUGA lock

ADJUSTING THE STEERING
WHEEL
WARNING
Never adjust the steering wheel
when the vehicle is moving.
Note:Make sure that you are sitting in
the correct position. See Sitting in the
correct position (page 90). WARNING
Make sure that you fully engage the
locking lever when returning it to its
original position.
AUDIO CONTROL
Select radio, CD or cassette mode on the
audio unit.
The following functions can be operated
with the remote control:
Volume
Volume up: Press the top button on the
back of the remote control.
Volume down: Press the bottom button
on the back of the remote control.
39
Steering wheel122E95178 3E95179 E78046

CHANGING THE WIPER
BLADES
Windscreen wiper blades
CAUTIONS
Set the windscreen wipers in the
service position to change the wiper
blades.
You can use the service position in
winter to provide easier access to
the wiper blades for freeing them
from snow and ice. The windscreen
wipers will return to their normal position
as soon as you switch on the ignition so
make sure that the outside of the
windscreen is free from snow and ice
before you switch on the ignition. Service position 1. Turn on the ignition.
2.
Move the wiper lever to position Aand
turn the ignition off as soon as the
wiper blades have reached the service
position.
Changing the windscreen wiper
blades
Set the windscreen wipers in the service
position and lift the wiper arms. 1. Press the locking button.
2. Remove the wiper blade.
Note:Make sure that the wiper blade
locks into place.
3. Install in the reverse order.
44
Wipers and washersE85833 E99280A E7289912

Rear window wiper blade
1. Lift the wiper arm.
2.
Position the wiper blade at right angles
to the wiper arm.
3. Disengage the wiper blade from the wiper arm.
4. Remove the wiper blade.
Note:Make sure that the wiper blade
locks into place.
5. Install in the reverse order.
45
Wipers and washers234E86456

DIRECTION INDICATORS
Note:Tap the lever up or down to make
the direction indicators flash only three times.
INTERIOR LAMPS
Courtesy lamp OffA
Door contact
B
OnC If you set the switch to position
B, the
courtesy lamp will come on when you
unlock or open a door or the luggage
compartment lid. If you leave a door open
with the ignition switch off, the courtesy
lamp will go off automatically after some
time to prevent the vehicle battery from
discharging. To switch it back on, switch
on the ignition for a short time.
The courtesy lamp will also come on when
you switch off the ignition. It will go off
automatically after a short time or when
you start or restart the engine.
If you set the switch to position Cwith the
ignition switch off, the courtesy lamp will
come on. It will go off automatically after
a short time to prevent the vehicle battery
from discharging. To switch it back on,
switch on the ignition for a short time.
Reading lamps If you switch off the ignition, the reading
lamps will go off automatically after some
time to prevent the vehicle battery from
discharging. To switch them back on,
switch on the ignition for a short time.
50
LightingE71098 CBAE71945 E71946

5. Disconnect the electrical connector.
6. Disconnect the headlamp washer
hose.
7. Remove the headlamp.
Note:When fitting the headlamp, make
sure that you fully engage the headlamp in the retaining clips.
CHANGING A BULB WARNINGS
Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by a
trained technician. There is a risk of
electric shock.
CAUTIONS
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See
Bulb
specification chart (page 58). Headlamp
Direction indicator
1. Remove the headlamp. See
Removing a headlamp (page 51). 2. Turn the bulb holder anti-clockwise
and remove it.
3. Gently press the bulb into the bulb holder, turn it anti-clockwise and
remove it.
Headlamp main and dipped beam
Note:
Remove the covers to gain access
to the bulbs.
1. Remove the headlamp. See
Removing a headlamp (page 51). 52
Lighting567E99390 E9948232 E7226032

2. Turn the bulb holder anti-clockwise
and remove it.
3. Remove the bulb.
Side lamp
1. Remove the headlamp. See Removing a headlamp (page 51).2. Remove the cover.
3. Pull the bulb holder and remove it.
Remove the bulb.
Side repeaters 1. Remove the cover.
2. Release the retaining clip.
3. Remove the bulb and bulb holder.
Remove the bulb.
Approach lamp Note:Position the mirror glass as far
inwards as possible.
1. Insert a screwdriver into the gap between the mirror housing and the
mirror glass and release the metal
retaining clip.
53
LightingE9943723 1E99397 23E99398 E722641

2. Remove the lamp.
3. Remove the bulb.
Front fog lamps
Note:You cannot separate the fog lamp
bulb from the bulb holder.
1. Using a suitable implement, remove the cover.
2. Remove the screws.
3. Remove the lamp. 4. Disconnect the electrical connector.
5. Turn the bulb holder anti-clockwise
and remove it.
Rear fog lamps 1. Carefully remove the lamp.
2. Turn the bulb holder anti-clockwise
and remove it.
3. Remove the bulb.
54
LightingE7226523 123E99405 4E994065 312E107752

Rear lamps
Direction indicator and reverse
lamp
1. Remove the trim panel.
Direction indicator
A
Reverse lamp
B
2. Disconnect the electrical connector.
3. Turn the bulb holder anti-clockwise and
remove it.
4. Remove the bulb. Tail lamp and brake lamp
1. Remove the trim panel.
2. Remove the nut.
55
Lighting1E99407 ABE99408 3E99411 2E99412