2010 FORD EXPLORER fog light

14. AdvanceTrac® with Roll
Stability Control™ (RSC®)
Stability Enhancement system
The AdvanceTrac
® stability
system helps you to maintain
stability and steerability of
your vehicle during a variety of road
conditions. If
your vehicle
becomes
stuck in the
snow, mud
or sand, try
turning off the AdvanceTrac
®
system to allow wheel spin
and help increase momentum
to dig the vehicle out. The
system defaults to on and the
control will illuminate when
turned off.
15. Overdrive Control Drive
with the vehicle in Overdrive (D) for the
best fuel
economy.
You can
deactivate
overdrive
by pressing
the transmission control
switch on the side of the
shift handle. Use this during
heavy city traffic where you
are continuously shifting in
and out of overdrive, hilly
terrain, heavy loads, trailer
towing and when engine
breaking is required. To
return to overdrive, simply
press the transmission control
switch again. 16. Heated Seats
(if equipped)
Your vehicle may be equipped
with heated seats. Press to
activate/deactivate.
17. Four-Wheel Drive (4WD,
if equipped) When 4X4
AUTO is selected, power is
automatically provided to
all four wheels. It is used for
normal street and highway
driving. 4X4 HIGH is used
for extra traction in slippery
conditions, such as in snow,
on icy roads, or in off-road
situations. It should not be
operated on dry pavement.
4X4 LOW can be selected
to provide extra gearing to
deliver maximum power to
all four wheels. It is intended
only for off-road applications
such as deep sand, steep
grades or pulling heavy objects.
SYNC
®
(if equipped)
SYNC® is a hands-free
communications and
entertainment system
with special phone and
media features. For more
information, please refer
to the SYNC
® Supplement
or to the SYNC® section in
the Navigation Supplement.
Please also feel free to visit
www.SyncMyRide.com.
All Wheel Drive (AWD)
(if equipped)
The AWD system is always
active and uses all four wheels
to power the vehicle, thereby
increasing traction and enabling you to drive over
terrain and road conditions
that a conventional
two-wheel drive vehicle
cannot. The system is capable
of handling many different
road conditions, including
street and highway driving
as well as off-road conditions
such as deep snow, ice or
shallow sand. Note: If your
vehicle is equipped with
AWD, a spare tire of a
different size (other than the
tire provided) should never
be used. Using a different size
could cause the AWD system
to stop functioning and
default to front wheel drive.
Refer to your Owner’s Guide
for more information.
Use extreme caution when using any device or feature
that may take your attention off the road. Your primary
responsibility is the safe operation of the vehicle. Only use
non-essential features and devices when it is safe to do so.
1 3 910
7
6 8
4
2
2010 EXPLORER
INSTRUMENT PANELSET – repeatedly until the
desired speed is reached.
•
To return to a previously
set speed, press RES.
•
To turn off, press the brake
pedal or press OFF.
5. Airbag Readiness Light
Illuminates briefly when the
ignition is turned on. If this
light fails to illuminate,
remains on or continues to
flash after the engine is
started, contact your
authorized dealer for
service as soon as possible.
A chime will also sound if
there is a malfunction in the
indicator light.
6. Service Engine Soon Light
The Service Engine soon light
illuminates briefly when
the ignition is turned on. If it
remains on or is blinking after
the engine is started, the On
Board Diagnostics System
(OBD-II) has detected a
malfunction. Drive in a moderate fashion and have your vehicle
serviced immediately by an
authorized dealer.
7. Hazard Flasher Control The hazard
flasher is
located on
the steering
column,
just behind
the steering
wheel. Press to activate all
front and rear direction signals.
Press again to deactivate. 8. Message Center
(if equipped)
The message center displays
important vehicle information
through a
constant
monitoring
of vehicle
systems. The
system will
also notify
you of potential vehicle
problems with a display of
system warnings followed by
a long indicator chime.
9. Low Tire Pressure
Warning light

Illuminates when your tire
pressure is low. If the light
remains on, the tire pressure
should be checked. If the light
does not turn on at ignition
or begins to flash, contact
your authorized dealer as
soon as possible.
10. ABS Warning Light
The ABS light
illuminates
briefly when the ignition is
turned on. If the ABS light
remains on or continues
to flash, a malfunction has
been detected. Contact your
authorized dealer as soon as
possible. Normal braking
(less ABS) is still functional
unless the brake warning
light
is also illuminated.
11. Steering Wheel Controls
VOL +/- : Press to
increase/decrease
volume levels.
: Press to access the
previous/ next radio
station, CD track or
preset satellite
radio channel.
MEDIA: Press repeatedly
to access all possible
media sources.
VOICE: Press to access
voice recognition,
if equipped.
: Press to access SYNC®
phone features,
if equipped.
12. Navigation System
(if equipped)
The mobile media navigation
system allows you to record
CDs, list to your saved music
and play DVDs in addition to
navigating the vehicle. For
more information, refer to
your Navigation supplement
(if equipped).
13. Power Adjustable Pedals
(if equipped)
Press the bottom of the
control q to move the pedals
closer to you or the top of
the control p to move the
pedals further away from you. The pedals
should only
be adjusted
when the
vehicle is
stopped and
in Park (P).
1417
15 16 2010 EXPLORER
DUAL AUTOMATIC TEMPERATURE CONTROL (IF EqUIPPED)
A
A. Driver/Passenger Side Temperature
Control: Press to increase or decrease the
temperature on the driver or passenger side
of the vehicle. Pressing the passenger side
control will activate dual zone where the
driver and passenger are able to select their
own individual settings. If the passenger side
controls are not activated, the driver side
controls will determine the temperature
setting for the entire vehicle (single zone).
B. AUTO: Press to engage full automatic
operation. The system will automatically
determine fan speed, airflow distribution,
A/C on or off and either outside or
recirculated air to heat or cool the vehicle
to reach the desired temperature.
C. Fan Speed: Press to increase or decrease
fan speed.
D. OFF: Outside air is shut out and the fan will
not operate. Note: If your vehicle is equipped
with the auxiliary climate control system, the
auxiliary fan can still operate with the front
system off. E. Manual Override Controls:
Press to manually
determine where airflow is directed. To return
to fully automatic control, press AUTO.
F. Windshield Defroster
: Outside air
is distributed through the windshield
defroster vents.
G. DUAL: Press to activate dual zone mode
where the driver and passenger have control
of their individual temperature settings.
Press again to return to single zone where
the driver’s settings will determine the
temperature for the entire vehicle.
H. Rear Window Defroster
: Press to
clear the rear window of thin ice and fog.
The defroster turns off automatically after ten
minutes or when the ignition is turned off.
To manually turn off the defroster before ten
minutes have passed, press the control again.
B CDE FH
G A
13
1. Headlamp Control
O: Turns the headlamps off.
: Turns on parking,
instrument panel, license
plate and tail lamps.
: Turns on headlamps.
: Autolamps (if equipped)
Automatically turns the
exterior lamps on/off
based on available daylight.
: Turns on fog lamps
by pulling the control
towards you.
Panel dimmer control
Move to adjust the level of
brightness on the instrument
panel when the exterior lights are on.
Move to the
full right
position
to turn on
the interior
lamps. Move
to the left position to turn off
the lights.
2. Parking Brake Release
Pull the lever to release the
parking brake. Driving with
the parking brake engaged
will cause the brakes to wear
out prematurely and reduce
fuel economy.
3. Multi-function Lever
Rotate the end of the control
up/down to increase/decrease
the speed of the wipers.
Push the end of the stalk:
• quickly for a single swipe
without fluid. •
and hold briefly for three
swipes with washer fluid.
• and hold for a longer
wash cycle.
To operate your rear window wiper,
turn the
rear wiper
control to 1
(intermittent
speed), 2
(normal
speed) or O (off). For a rear
wash cycle, rotate and hold
the rear wiper control
to either
position.
For better visibility, your
headlamps will turn on
(during daylight) if your
windshield wipers and
autolamps (if equipped) are
on. Note: For optimal wiper
performance, clean your
blades and glass regularly.
Refer to your Owner’s Guide
for more information.
4. Speed Control

To set the speed:
1.
Press ON.
2.
Accelerate
to the
desired
speed.
3.
Press SET + or and take your
foot off the accelerator.
•
To set a higher speed, press
and hold SET + or press
SET + repeatedly until the
desired speed is reached.
•
To set a lower speed, press
and hold SET – or press
51112