2010 FIAT LINEA RHD height

32
The fabric upholstery of your
car is designed to withstand
the normal wear and tear of
your car for a long time. Some
precautions are however needed. Avoid
prolonged rubbing against clothing ac-
cessories, such as metal buckles, Velcro
strips and the like, which by applying a
high pressure on the fabric in a small
area could cause the breakage of some
threads and damage the upholster y.
Seat height adjustment
(where provided) fig. 22
Move lever Bupwards or downwards to
achieve the required height.
IMPORTANT
Adjustment must be car-
ried out only seated in the relevant seat.
FRONT SEATS
fig. 22F0R0021m
All adjustments must be
made with the car stationary.
WARNING
Backwards/Forwards adjustment
fig. 22
Lift lever Aand push the seat forwards
and backwards: ensure
your arms should
rest on the steering wheel rim while you
are driving.
After releasing the lever, al-
ways check that the seat is
locked on the guides by tr ying to
move it backwards and forth. If it is
not locked, the seat may move unex-
pectedly and make you loose control
of the car.
WARNING
For maximum safety, keep
the back of your seat up-
right, lean back into it and make sure
the seat belt fits closely across your
chest and hips.
WARNING
Back rest angle adjustment fig. 22
Push lever C.
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
LINEA Owner HAND BOOK RHD.pdf 32LINEA Owner HAND BOOK RHD.pdf 328/21/09 2:16:03 PM8/21/09 2:16:03 PM

33
The fabric upholstery of your
car is designed to withstand
the normal wear and tear of
your car for a lon g tim e.
Some precautions are however need-
ed. Avoid prolonged rubbing against
clothing accessories,
such as metal
buckles, Velcro strips and the like,
which by applying a high pressure on
the fabric in a small area could cause
the breakage of some threads and
damage the upholstery.
HEAD RESTRAINTS
FRONT fig. 23
To improve passenger safety, the height of
the head restraints can be adjusted. They
lock into place automatically in the requi-
red position.
To adjust head restraints proceed as
fol-
lows:
upward adjustment: raise the head re-
Downward adjustment: push the head straint until you hear it click.
restraint down to the required position
REAR SEATS
To folds the rear seats refer to paragraph
“Extending the boot” ‘Refer page no. 68’
of this section.
SAFETY
DEVICES CORRECT USE
OF THE
CAR
WARNING
LIGHTS AND
MESSAGES IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS


The head restraints must be
adjusted so that they sup-
port your neck and not your head.
Only in this way may they perform
their protective action.
WARNING
LINEA Owner HAND BOOK RHD.pdf 33LINEA Owner HAND BOOK RHD.pdf 338/21/09 2:16:03 PM8/21/09 2:16:03 PM

35
STEERING WHEEL
The driver can adjust the steering wheel
position in height.
Proceed as follows:
release the lever A-fig. 25pushing it
forwards (position 1);
adjust the steering wheel as required;
lock the lever Apulling it towards the
steering wheel (position 2).
fig. 25F0R0026m
Any adjustment of the steer-
ing wheel position must be
carried out only with the car station-
ary and the engine turned off.
WARNING
It is absolutely forbidden to
carr y out whatever after-
market operation involving steering
system or steering column modifica-
tions (e.g .: installation of anti-theft
device) that could badly affect per-
formance and safety, cause the lapse
of warranty and also result in non-
compliance of the car with homolo-
gation requirements.
WARNING
SAFETY
DEVICES CORRECT USE
OF THE
CAR
WARNING
LIGHTS AND
MESSAGES IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS

 
LINEA Owner HAND BOOK RHD.pdf 35LINEA Owner HAND BOOK RHD.pdf 358/21/09 2:16:03 PM8/21/09 2:16:03 PM

78
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
The rear seat belts must be used as shown
in the diagram in fig. 2.
SEAT BELTS
USING THE SEAT BELTS fig. 1
The belt should be worn keeping the chest
straight and rested against the seat back.
To fasten the seat belts, take hold
the
tongue Aand insert it into the buckle B,
until hearing the locking click.
At removal, if it jams, let it rewind for a
short stretch, then pull it out again with-
out jerking.
Press button Cto release the belt. Ac-
company the belt while it is being
re-
wound to prevent twisting.
Through the reel, the belt automatically
adapts to the body of the passenger wear-
ing it, allowing freedom of movement.
The reel may lock when the car is parked
on a steep slope:
this is perfectly normal.
Furthermore, the reel mechanism locks
the belt if it is pulled and in the event of
sudden braking, collisions and on high
speed bends.
The rear seat is fitte d with inertial seat
belts with three anchor points and reel.
fig. 1F0R0150m
fig. 2F0R0088m
Never press button C-fig. 1
when travelling.
WARNING
fig. 3
A
B
F0R0151m
ADJUSTING THE FRONT SEAT
BELT HEIGHT
Always adjust the seat belt height to the
passenger’s body: this precaution may
considerably reduce the risk of injury in
the event of a collision.
Correct regulation is obtained when the
belt passes approximately half way
be-
tween the shoulder and the neck.
To adjust, move the grip A-fig. 3of the
locking mechanism either up or down and
at the same time move the ring B-fig. 3
to the most suitable of the allowed posi-
tions.
CORRECT USE
OF THE
CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
PRESS
LINEA Owner HAND BOOK RHD.pdf 78LINEA Owner HAND BOOK RHD.pdf 788/21/09 2:16:11 PM8/21/09 2:16:11 PM

84
Do not plac e a cradle sea t
facing backwards on the
front seat if the passenger side airbag
is on. Deployment of the airbag in an
accident could cause fatal injuries to
the baby regardless of the severity of
the collision. It is advisable to carr y
children in an appropriate restraint
system on the rear seat which is the
most protected position in the event
of an accident.
WARNING
SEVERE DANGER If you
need to carry a baby on the
front passenger seat in a
cradle restraint system fac-
ing backwards, the passen-
ger side airbags (front and
side bags , where provided) must be
deactivated using the setup menu.
Check the warning light on the
instrument panel. Move the passen-
ger’s seat as far back as possible to
avoid contact between the cradle and
the dashboard.
WARNINGOver 1.50 m in height, from the point of
view of restraint systems, children are
considered as adults and wear the seat
belts normally.
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
LINEA Owner HAND BOOK RHD.pdf 84LINEA Owner HAND BOOK RHD.pdf 848/21/09 2:16:12 PM8/21/09 2:16:12 PM

WHEN NEEDING TO
CHANGE A BULB
GENERAL INSTRUCTIONS
When a bulb is not working, check that
the corresponding fuse is intact before
replacing it: refer to the “If a fuse
blows” paragraph in this chapter for
fuse location.
before changing a bulb check the con-
tacts for oxidation;
burnt bulbs must be replaced by others
of the same type and power;
always check the height of the headlight
beam after changing a bulb, for reasons
of safety.
IMPORTANT A
slight misting may appear
on the internal surface of the headlight:
this does not indicate a fault and is caused
by low temperature and the degree of hu-
midity in the air. Misting will rapidly dis-
appear when the headlights are switched
on.
The presence of drop inside the head-
lights indicates infiltration of water. Go to
a Fiat Dealership.
TYPES OF BULBS
Various types of bulbs are fitted
to your car:AAll glass bulb: clipped into place. Pull
to extract.
BBayonet bulbs:
to remove this type
of bulb from its holder, press the
bulb and turn it anticlockwise.
CCylindrical bulbs:
release from the
contacts to extract.
D-EHalogen bulbs: release the fastening
clip from the corresponding seat to
remove the lamp. Halogen lamps must be han-
dled
holding the metallic part
only. Touching the transparent
part of the
bulb with your fin-
gers may reduce the intensity of the
emitted light and even
compromise du-
ration of the lamp itself. In the case of
accidental contact, rub the lamp with a
cloth and spirit and leave to dry.
Modifications or repairs to
the electrical system (elec-
tronic control units) that are not car-
ried out properly or do not take the
technical specifications of the system
into account can cause malfunctions
leading to the risk of fire.
WARNING
Halogen bulbs contain pres-
surised gas which, if broken,
may cause small fragments of glass to
be projected outwards.
WARNING
fig. 7F0R0112m
119
CORRECT USE
OF THE CAR
TECHNICAL
INDEX
DASHBOARD
SAFETY
WARNING
LIGHTS AND
MESSAGES IN AN
EMERGENCY
CAR
MAINTENANCE
SPECIFICATIONS
AND CONTROLS
DEVICES
LINEA Owner HAND BOOK RHD.pdf 119LINEA Owner HAND BOOK RHD.pdf 1198/21/09 2:16:19 PM8/21/09 2:16:19 PM

Replacing the windscreen wiper
blades fig. 10
How to remove the blade:
raise the windscreen wiper arm Afrom
the windscreen;
turn blade B90° around pin C, locat-
ed at the end of the wiper arm;
press the blade locking tabs;
remove the blade from pin C.
fig. 10F0R0236m
SPRAY NOZZLES
Windscreen washer fig. 11
If there is no jet of fluid, firstly check that
there is fluid in the reservoir: see “Check-
ing fluid levels” in this section).
Then check that the nozzle holes are not
clogged, if necessary using a needle.
The windscreen jets are directed by ad-
justing the angle of the nozzles.
Fluid jets shall be directed at about
1/3height from the window upper edge.
fig. 11F0R0143m
How to insert the blade:
insert the blade fastening tabs in the
hole on the end of the arm;
refit the arm with the blade on the
windscreen.
154
CORRECT USE
OF THE CAR
AND CONTROLS
DEVICES
SPECIFICATIONS
WARNING
LIGHTS AND
MESSAGES IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
SAFETY
TECHNICAL
LINEA Owner HAND BOOK RHD.pdf 154LINEA Owner HAND BOOK RHD.pdf 1548/21/09 2:16:35 PM8/21/09 2:16:35 PM

DIMENSIONS
Dimensions are expressed in mm and re-
fer to the vehicle fitted with standard
tyres.
The height refers to the unladen vehicle.
Boot volume
Unladen boot volume
(V.D.A. standards) ...................... 500 dm
3
Boot capacity with rear
seat folded ..................................... 870 dm3
fig. 4
Versions A B C D E F G H
1.4 16v
4560 928 2603 1029 1487
1.3 Multijet
IMPORTANT Track measurements may vary according to rim/tyre size.
F0R0237m
169
TECHNICAL
SPECIFICATIONS
CAR
MAINTENANCE
CORRECT USE
OF THE CAR
INDEX
DASHBOARD
SAFETY
WARNING
LIGHTS AND
MESSAGES IN AN
EMERGENCY
AND CONTROLS
DEVICES
1471
1946,21
1483
LINEA Owner HAND BOOK RHD.pdf 169LINEA Owner HAND BOOK RHD.pdf 1698/21/09 2:16:37 PM8/21/09 2:16:37 PM