2010 FIAT DUCATO technical specifications

[x] Cancel search: technical specifications

driver seat adjustment suspension navigation update handbrake wheelbase stop start

Page 229 of 286

FIAT DUCATO 2010 Owner handbook (in English) 228
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
❒wipe a sponge with a slightly soapy solution

228
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
❒wipe a sponge with a slightly soapy solution over the
bodywork, frequently rinsing the sponge;
❒rinse well with water and dry with a jet of air or
a chamois leather.
Dry the less visible parts particularly carefully, such as
the door frames, bonnet and the headlight frames,
where water may stagnate more easily. It is a good idea
to leave the vehicle outdoors for a while after washing it
to give the water time to evaporate.
Do not wash the vehicle after it has been left in the sun
or with the bonnet hot: this may alter the shine of the
paintwork.
Exterior plastic parts should be cleaned in the same way
as the rest of the vehicle.
Where possible, do not park the vehicle under trees;
the resinous substances released by many species give
the paint a dull appearance and increase the possibility
of rust.
To protect the paint more effectively, polish
occasionally with special protective waxes; when the
paint tends to cloud because of a build-up of smog,
polish with slightly abrasive protective waxes.
IMPORTANT Bird droppings must be washed off
immediately and carefully as the acid they contain is
particularly aggressive. VEHICLE BODY AND UNDERBODY
WARRANTY
Your vehicle is covered by warranty against perforation
due to rust of any original element of the structure or
body.
For the general terms of this warranty, refer to the
Warranty Booklet.
ADVICE FOR PRESERVING THE BODYWORK
Paint
Paintwork does not only serve an aesthetic purpose, but
also protects the underlying sheet metal. Touch up
abrasions and scratches immediately to prevent rust
formation. Use only original paint products for touch-
ups (see “Bodywork paint identification plate” in the
“Technical specifications” section). Normal maintenance
of paintwork consists in washing the car: the frequency
depends on the conditions and environment where the
car is used. For example, it is advisable to wash the
vehicle more often in areas with high levels of
environmental pollution or on roads spread with salt.
To correctly wash the vehicle proceed as follows:
❒remove the aerial from the roof to prevent damage
to it if the vehicle is washed in an automatic system;
❒wash the body using a low pressure jet of water;
207-230 DUCATO LUM EN 7ed 6/21/10 2:18 PM Page 228