Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the MENU button. To reset the oil change indica-
tor system (after performing the scheduled maintenance)
refer to the following procedure.
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE:If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.Trip Functions
Press and release the MENU button until one of the
following Trip Functions displays in the EVIC:
•Average Fuel Economy
•Distance To Empty
•Trip A
•Trip B
•Elapsed Time
•Display Units of Measure in
Press the SCROLL button to cycle through all the Trip
Computer functions.
The Trip Functions mode displays the following.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 173
NOTE:
•The oil change indicator message will not monitor the
time since the last oil change. Change your vehicle’s
oil if it has been six months since your last oil change,
even if the oil change indicator message is NOT
illuminated.
•Change your engine oil more often if you drive your
vehicle off-road for an extended period of time.
•Under no circumstances should oil change intervals
exceed 6,000 miles (10,000 km) or six months, which-
ever comes first.
Your authorized dealer will reset the oil change indicator
message after completing the scheduled oil change. If a
scheduled oil change is performed by someone other than your authorized dealer, the message can be reset by
referring to the steps described under “Electronic Vehicle
Information Center (EVIC)/Oil Change Required” in
“Understanding Your Instrument Panel” or under “In-
strument Cluster Description/Odometer/Trip Odom-
eter” in “Understanding Your Instrument Panel” for
further information.
At Each Stop for Fuel•Check the engine oil level. Refer to “Maintenance
Procedures/Engine Oil” in “Maintaining Your Ve-
hicle” for further information.
•Check the windshield washer solvent and add if
required.
8
M
A I
N T
E
N A
N CE
S
C
H E
D
U L
E
SMAINTENANCE SCHEDULES 387
Heated.............................. 79
Outside .............................. 77
Vanity ............................... 80
Modifications/Alterations, Vehicle ............. 7
Monitor, Tire Pressure System ............... 298
Mopar Parts ......................... 341,411
MTBE/ETBE ........................... 305
Multi-Function Control Lever ............... 126
New Vehicle Break-In Period ................ 68
Occupant Restraints ................... 35,51,55
Occupant Restraints (Sedan) .............47,51,53
Octane Rating, Gasoline (Fuel) ............304,383
Odometer ............................. 158
Trip ................................ 158
Oil Change Indicator ..................... 172
Oil Change Indicator, Reset ................. 172 Oil, Engine
......................... 343,383
Capacity ............................ 382
Change Interval ....................... 343
Checking ............................ 343
Dipstick ............................. 343
Disposal ............................ 344
Filter ............................ 345,383
Filter Disposal ........................ 344
Materials Added to ..................... 344
Recommendation ................... 344,382
Viscosity ......................... 344,382
Oil Filter, Change ........................ 345
Oil Filter, Selection ....................... 345
Onboard Diagnostic System ..............339,340
Opener, Garage Door (HomeLink) ........... 137
Operating Precautions .................... 339
Operator Manual (Owner’s Manual) ............ 4
Outside Rearview Mirrors .................. 77
Overhead Console ....................... 136
10
INDEX 427
