2010 DODGE CALIBER key battery

CAUTION!
•If the vehicle being towed requires steering, the
ignition switch must be in the ACC position, not
in the LOCK position.
•Do not attempt to use sling-type equipment when
towing. When securing the vehicle to a flatbed
truck, do not attach to front or rear suspension
components. Damage to your vehicle may result
from improper towing.
Without The Ignition Key
Special care must be taken when the vehicle is towed
with the ignition in the LOCK position. A dolly should be
used under the front wheels if the rear wheels are raised.
Proper towing equipment is necessary to prevent dam-
age to the vehicle.
Battery power is required to release the brake/
transmission interlock system (automatic transmission
only). There is a removable plug in the right side of the
shift lever housing that allows you to insert your finger to
override the system. The ignition key must be in the ON
position to use the override lever.
6
WHAT TO DO IN EMERGENCIES 387

persists, the message will appear the next time the
vehicle is started. This might indicate a damaged cap. If
the problem is detected twice in a row, the system will
turn on the MIL. Resolving the problem will turn the MIL
light off.
EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS
In some localities, it may be a legal requirement to pass
an inspection of your vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.For states that require an Inspection and Mainte-
nance (I/M), this check verifies the “Malfunction
Indicator Light (MIL)” is functioning and is not
on when the engine is running, and that the OBD II
system is ready for testing.
Normally, the OBD II system will be ready. The OBD II
system may notbe ready if your vehicle was recently serviced, recently had a dead battery or a battery replace-
ment. If the OBD II system should be determined not
ready for the I/M test, your vehicle may fail the test.
Your vehicle has a simple ignition key-actuated test,
which you can use prior to going to the test station. To
check if your vehicle’s OBD II system is ready, you must
do the following:
1. Turn the ignition switch to the ON position, but do not
crank or start the engine.
2. If you crank or start the engine, you will have to start
this test over.
3. As soon as you turn the ignition switch to the ON
position, you will see the MIL symbol come on as part of
a normal bulb check.
394 MAINTAINING YOUR VEHICLE

Overheating.......................... 373
Selection Of Lubricant ................... 416
Shifting ............................. 300
Special Additives ...................... 416
Autostick ............................. 302
Battery ............................... 401
Keyless Transmitter Replacement (RKE) ....... 24
Belts, Seat .............................. 87
Beverage Cooler ........................ 175
Body Mechanism Lubrication ............... 403
B-Pillar Location ........................ 326
Brake Assist System ...................... 314
Brake Fluid ............................ 435
Brake, Parking .......................... 308
Brake System ........................ 310,413
Anti-Lock (ABS) .................... 31 1,314
Master Cylinder ....................... 413
Parking ............................. 308 Warning Light
........................ 195
Brakes ............................. 310,413
Brake/Transmission Interlock ............... 299
Break-In Recommendations, New Vehicle ........ 84
Bulb Replacement ....................... 427
Bulbs, Light .......................... 89,427
Capacities, Antifreeze (Engine Coolant) ........ 433
Capacities, Fluid ........................ 433
Caps, Filler Fuel ............................... 353
Oil (Engine) ....................... 392,399
Power Steering ........................ 307
Car Washes ............................ 418
Carbon Monoxide Warning ...............86,352
Cargo Area Cover ....................... 179
Cargo Area Features ...................... 178
Cargo Compartment Light ............................... 178
10
INDEX 467

Hitches............................. 360
Minimum Requirements ................. 363
Trailer and Tongue Weight ............... 362
Wiring .............................. 367
Trailer Towing Guide ..................... 361
Trailer Weight .......................... 361
Transaxle ............................. 298
Automatic .................... 12,293,298,416
Autostick ............................ 302
Manual .......................... 293,296
Operation ........................... 298
Overdrive ........................... 302
Selection of Lubricant ................... 416
Transmission Range Indicator ....................... 197
Transmitter Battery Service
(Remote Keyless Entry) .................... 24
Transmitter, Garage Door Opener (HomeLink) . . 158
Transporting Pets ........................ 84 Tread Wear Indicators
.................... 335
Trip Odometer .......................... 197
Trip Odometer Reset Button ................ 199
Turn Signals ...................... 148,200,429
UCI Connector ......................... 262
Uconnect™ (Hands-Free Phone) .............. 99
Understanding Your Instrument Panel ......... 189
Uniform Tire Quality Grades ................ 462
Universal Consumer Interface (UCI) Connector . . . 262
Universal Transmitter ..................... 158
Unleaded Gasoline ....................... 348
Vanity Mirrors ........................... 98
Vehicle Certification Label ................. 355
Vehicle Identification Number (VIN) ............ 6
Vehicle Loading ................... 327,355,357
Vehicle Modifications/Alterations .............. 7
Vehicle Storage ....................... 285,427
10
INDEX 481