2010 Citroen DS3 DAG service
[x] Cancel search: servicePage 14 of 253
37Monitoring
System which informs the driver when the next ser vice is due, in accordance with the manufacturer's ser vicing schedule. The point at which the ser vice is due is calculated from the last indicator zero reset.It is determined by two parameters: - the distance travelled, - the time elapsed since the last ser vice.
Service indicator
Between 600 miles (1 000 km) and 1 800 miles (3 000 km) remain before the next service is due
For a few seconds after the ignition is switched on, the spanner symbolising the ser vice operations comes on. The distance recorder display line indicates the distance remaining before the next ser vice is due. Example: 1 700 miles/2 800 km remain before the next ser vice is due. For a few seconds after the ignition is switched on, the display indicates:
Less than 600 miles (1 000 km) remain before the next service is due
Example: 400 miles/900 km remain before the next ser vice is due. For a few seconds after the ignition is switched on, the display indicates:
A few seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on to indicate that a ser vice must be carried out soon. A few seconds after the ignition is switched on, the spanner goes off ; the distance recorder off
resumes its normal operation. The display then indicates the total and trip distances.
More than 1 800 miles (3 000 km) remain before the next service is due
When the ignition is switched on, no ser vice
information appears on the display.
Page 15 of 253
A few seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on .
The distance remaining may be weighted by the time factor, depending on the driver's driving habits.
Therefore, the spanner may also come on if you have exceeded the two year ser vice inter val.
Service indicator zero reset
After each ser vice, the ser vice indicator must be reset to zero. The procedure for resetting to zero is as follows: switch off the ignition, press and hold the trip distance recorder zero reset button, switch on the ignition; the distance recorder display begins a countdown, when the display indicates "=0" , release the button; the spanner disappears.
Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least five minutes for the zero reset to be taken into account.
Retrieving the service information
You can access the ser vice information at any time. Press the trip distance recorder zero reset button. The ser vice information is displayed for a few seconds, then disappears.
Service overdue
For a few seconds after the ignition is switched on, the spanner flashes to indicate that the ser vice must be carried out as soon as possible. Example: the service is overdue by 300 miles (km). For a few seconds after the ignition is switched on, the display indicates:
Page 192 of 253
SOS
SOS
SOS
EMERGENCY OR ASSISTANCE CALL
EMERGENCY CALL ASSISTANCE CALL OPERATION OF THE SYSTEM
In an emergency, press this button for more than 2 seconds. Flashing of the green indicator lamp and a v o i c e m e s s a g e c o n fi r m t h a t t h e c a l l h a s b e e n m a d e t o the CITROËN Emergency team * . v o i c e m e s s a g e c o n fi r m t h a t t h e c a l l h a s b e e n m a d e t o v o i c e m e s s a g e c o n fi r m t h a t t h e c a l l h a s b e e n m a d e t o
Pressing this button again immediately cancels the request. The green indicator lamp goes off.
T h e g r e e n i n d i c a t o r l a m p r e m a i n s o n ( w i t h o u t fl a s h i n g ) w h e n communication is established. It goes off at the end of commun ication.
This call is dealt with by the CITROËN Emergency team which re ceives locating information from the vehicle and can send a detailed alert to the appropriate emergency services. In countries in which the team is no t operational, or when the locating service has been expressly refused, t h e c a l l i s d e a l t w i t h d i r e c t l y b y t h e e m e r g e n c y s e r v i c e s ( 1 1 2 ) w i t h o u t t h e vehicle location.
If an impact is detected by the airbag ECU, and independently of any triggering of the airbags, an emergency call is made automatically.
* This service is subject to conditions and availability. Consult a CITROËN dealer. * This service is subject to conditions and availabilityThis service is subject to conditions and availability
Press this button for more than 2 seconds to request assistance if the vehicle breaks down.
A v o i c e m e s s a g e c o n fi r m s t h a t t h e c a l l h a s b e e n m a d e * .
Pressing this button again immediately cancels the request.
T h e c a n c e l l a t i o n i s c o n fi r m e d b y a v o i c e m e s s a g e .
When the ignition is switched on, the green indicator lamp comes on for 3 seconds indicating that the system is operating correctly.
I f t h e o r a n g e i n d i c a t o r l a m p fl a s h e s : t h e r e i s a system malfunction.
If the orange indicator lamp is on c o n t i n u o u s l y : t h e b a c k u p b a t t e r y m u s t b e replaced.
In both cases, consult a CITROËN dealer.
Page 211 of 253
08
1
2
3
2
1
4
243
* The services available depend on the network, the SIM
card and the compatibility of the Bluetooth telephone used. Check the t elephone manual and with your network provider for details of the services available to you. A list of mobile telephones with the best level of compatibility is available from the dealer network.
BLUETOOTH TELEPHONE
CONNECTING A TELEPHONE
For reasons of safety and because they require prolonged atte ntion For reasons of safety and because they require prolonged attent ion on the part of the driver, the operations for pairing the Bluetooth , the operations for pairing the Bluetooth mobile telephone to the hands-free system of the MyWmobile telephone to the hands-free system of the MyWay must be carried out with the vehicle stationary. The ignition must b e on. The ignition must be on.
Activate the telephone's Bluetooth function.
The last telephone connected is reconnected automatically.
Enter the authentication code on the telephone. The code to be entered is displayed on the screen.
To change the telephone connected, p r e s s t h e P H O N E b u t t o n , t h e n s e l e c t Phone Menu and press the dial to c o n fi r m .
Once the telephone has been connected, MyWay can synchronise ay can synchronise the address book and the call list. This synchronisation may take a This synchronisation may take a few minutes * .
Select "Connect phone". Select the t e l e p h o n e a n d p r e s s t o c o n fi r m .
T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s T h e l i s t o f t e l e p h o n e s c o n n e c t e d p r e v i o u s l y ( 4 m a x i m u m ) a p p e a r s on the multifunction screen. Select the telephone required on the multifunction screen. Select the telephone required for a new connection.
P r e s s t h e P H O N E b u t t o n .
F o r a fi r s t c o n n e c t i o n , s e l e c t "Search phone" and press the dial to c o n fi r m . T h e n s e l e c t t h e n a m e o f t h e telephone.
Search phone
Connect phone
Page 232 of 253
S a i s i r c o d e a u t h e n t i i c a t i o n 0 1 O K D e l 2 3 4 5 6 7 8 9 _
06
11
22
44
55
33
66
77
99
1010
88
265
BLUETOOTH FUNCTIONS
F o r s a f e t y r e a s o n s a n d b e c a u s e t h e y r e q u i r e p r o l o n g e d a t t e n t i o n o n t h e p a r t o f t h e d r i v e r , t h e o p e r a t i o n s f o r p a i r i n g o f t h e B l u e t o o t h mobile telephone with the Bluetooth hands-free system of your audio equipment must be carried out with the vehicle station ary a n d t h e i g n i t i o n o n .
Press the MENU button.
A w i n d o w i s d i s p l a y e d w i t h " S e a r c h i n g . . . " .
Activate the telephone's Bluetooth function.
I n t h e m e n u , s e l e c t :
- Bluetooth telephone function - Audio
- B l u e t o o t h c o n fi g u r a t i o n
- Perform a Bluetooth search
The services offered depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. C o n s u l t y o u r t e l e p h o n e ' s m a n u a l a n d y o u r o p e r a t o r t o fi n d o u t w h i c h services are available to you. A list of mobile telephones which offer the best r a n g e o f s e r v i c e s i s a v a i l a b l e f r o m t h e n e t w o r k . C o n s u l t a C I T R O Ë N d e a l e r . services are available to you. A list of mobile telephones which offer the best list of mobile telephones which offer the best
BLUETOOTH TELEPHONE SCREEN C
T h e T E L E P H O N E m e n u p e r m i t s a c c e s s t o t h e f o l l o w i n g f u n c t i o n s i n p a r t i c u l a r : D i r e c t o r y * , C a l l l i s t , P a i r i n g m a n a g e m e n t .
T h e fi r s t 4 t e l e p h o n e s r e c o g n i s e d a r e d i s p l a y e d i n t h i s w i n d o w .
A virtual keypad is displayed on the s c r e e n : e n t e r a c o d e w i t h a t l e a s t 4 d i g i t s .
C o n fi r m b y p r e s s i n g O K .
I f p a i r i n g f a i l s , t h e n u m b e r o f a t t e m p t s i s n o t l i m i t e d .
Select the telephone to be connected from the list. Only one telephone can be connected at a time.
A m e s s a g e i s d i s p l a y e d o n t h e s c r e e n o f t h e t e l e p h o n e c h o s e n : t o a c c e p t t h e p a i r i n g , e n t e r t h e s a m e c o d e o n t h e t e l e p h o n e , t h e n c o n fi r m b y p r e s s i n g O K .
" P a i r i n g o f N a m e _ t e l e p h o n e s u c c e s s f u l " a p p e a r s o n t h e s c r e e n . The automatic connection authorised is only active after the t e l e p h o n e h a s b e e n c o n fi g u r e d . The directory and the call list can be accessed afterthe synchronisation period.
PAIRING A TELEPHONE
* If your telephone is fully compatible.
T h e p a i r i n g c a n a l s o b e i n i t i a t e d f r o m t h e t e l e p h o n e .
(AVAILABILITY DEPENDS ON MODEL AND VERSION)