Page 30 of 253
55Multifunction screens
16/9 colour screen (MyWay)
It displays the following information automatically and directly: - time, - date, - altitude, - ambient temperature (the value displayed flashes if there is a risk of ice),
- check of the doors, - warning and vehicle function status messages, displayed temporarily,
- audio functions, - trip computer information (see the "Monitoring" section), - satellite navigation system information.
Displays on the screen
MyWay To select one of the applications, at the control panel: press the dedicated "R ADIO" , "MUSIC" , "NAV" , "TR AFFIC" , "SETUP" or "PHONE" button for access to the corresponding menu, turn the dial to change the selection, press the dial to confirm the selection, or press the "ESC" button to abandon the
current operation and return to the previous display.
Controls
For more information on these applications, refer to the "Audio and Telematics" section or to the specific user guide given to you with the other owner's documents.
Page 37 of 253
Front demist - defrost
W i t h t h e h e a t i n g / v e n t i l a t i o n
system
Put the temperature and air flow controls to the dedicated marked position. Put the air intake control to the "Exterior air intake" position (manual control to the right or electric control with indicator lamp off). Put the air distribution control to the " Windscreen" position.
These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows.
W i t h t h e m a n u a l a i r
conditioning system
Put the temperature and air flow controls to the dedicated marked position. Put the air intake control to the "Exterior air intake" position (manual control to the right or electric control with indicator lamp off). Put the air distribution control to the " Windscreen" position. Switch on the air conditioning by pressing the "A /C" button; the associated green
warning lamp comes on.
With Stop & Star t, when the demisting, air conditioning and air flow functions are activated, STOP mode is not available.
Page 41 of 253
Front demist - defrost
W i t h t h e h e a t i n g / v e n t i l a t i o n
system
Put the temperature and air flow controls to the dedicated marked position. Put the air intake control to the "Exterior air intake" position (manual control to the right or electric control with indicator lamp off). Put the air distribution control to the " Windscreen" position.
These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows.
W i t h t h e m a n u a l a i r
conditioning system
Put the temperature and air flow controls to the dedicated marked position. Put the air intake control to the "Exterior air intake" position (manual control to the right or electric control with indicator lamp off). Put the air distribution control to the " Windscreen" position. Switch on the air conditioning by pressing the "A /C" button; the associated green
warning lamp comes on.
With Stop & Star t, when the demisting, air conditioning and air flow functions are activated, STOP mode is not available.
Page 42 of 253
Front demist - defrost
W i t h t h e h e a t i n g / v e n t i l a t i o n
system
Put the temperature and air flow controls to the dedicated marked position. Put the air intake control to the "Exterior air intake" position (manual control to the right or electric control with indicator lamp off). Put the air distribution control to the " Windscreen" position.
These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows.
W i t h t h e m a n u a l a i r
conditioning system
Put the temperature and air flow controls to the dedicated marked position. Put the air intake control to the "Exterior air intake" position (manual control to the right or electric control with indicator lamp off). Put the air distribution control to the " Windscreen" position. Switch on the air conditioning by pressing the "A /C" button; the associated green
warning lamp comes on.
With Stop & Star t, when the demisting, air conditioning and air flow functions are activated, STOP mode is not available.
Page 59 of 253
lamps and flashing of the direction indicators for a few seconds.
Locating your vehicle
Press the closed padlock to
locate your locked vehicle in a car park.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for star ting to be possible. This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents star ting of the engine by anyone who does not have the key.
In the event of a malfunction, you are informed by lighting of this warning lamp, an audible signal and a message on the multifunction screen. In this case, your vehicle does not star t; contact a CITROËN dealer as soon as possible.
- Position 1: Stop - Position 2: Ignition - Position 3: Star ting
Ignition switch
Page 61 of 253
lamps and flashing of the direction indicators for a few seconds.
Locating your vehicle
Press the closed padlock to
locate your locked vehicle in a car park.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for star ting to be possible. This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents star ting of the engine by anyone who does not have the key.
In the event of a malfunction, you are informed by lighting of this warning lamp, an audible signal and a message on the multifunction screen. In this case, your vehicle does not star t; contact a CITROËN dealer as soon as possible.
- Position 1: Stop - Position 2: Ignition - Position 3: Star ting
Ignition switch
Page 64 of 253
Following disconnection of the vehicle battery,
replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. First of all, use the key in the lock to unlock or lock your vehicle. Then, reinitialise the remote control. If the problem persists, contact a CITROËN dealer as soon as possible.
Remote control problem
Reinitialisation
Switch off the ignition. Turn the key to position 2 (Ignition) . Press the closed padlock immediately for a few seconds. Switch off the ignition and remove the key from the ignition switch. The remote control is fully operational again.
Changing the battery
Battery ref.: CR1620/3 volts. This replacement battery is available from CITROËN dealers.
Maintain pressure on lug A and remove the chrome finisher by sliding it off at 45°. Unclip the casing by inser ting a coin at the
notch and rotating. Slide the flat battery out of its location. Slide the new battery into its location obser ving the original direction. Clip the casing in place, then the chrome finisher. Reinitialise the remote control.
If the battery is flat, you are informed by lighting of this warning lamp in the instrument panel, an audible signal and a message on the multifunction screen.
Unfold the key. Release the chrome finisher by pressing on
lug A .
Page 68 of 253
Doors
From outside
After unlocking the vehicle using the remote control or the key, pull the door handle.
From inside
Pull the door lever to open the door; this unlocks this vehicle completely.
Closing
When a door is not closed correctly:
- when the engine is running , this warning lamp comes on, accompanied by a message on the multifunction screen for a few seconds,
- when the vehicle is moving (speed higher than 6 mph (10 km/h)), this warning lamp comes on, accompanied by an audible signal and a message on the multifunction screen for a few seconds.
