2010 CITROEN C4 PICASSO ECU

Downloaded from www.Manualslib.com manuals search engine VI
108
FITTINGS
MATS
Removable carpet protection com-
ponent.

Fitting

When fi tting the mat for the fi rst time,
on the driver's side, use only the fi x-
ings provided in the wallet attached.
The other mats are simply placed on
the carpet.


Removal

To remove the mat on the driver's side:


)
move the seat as far back as
possible,

)
unclip the fi xings,

)
remove the mat.



Refitting

To refi t the mat on the driver's side:


)
position the mat correctly,

)
refi t the fi xings by pressing,

)
check that the mat is secured
correctly. To avoid any risk of jamming of the
pedals:


- only use mats which are suited
to the fi xings already present in
the vehicle; their use is essen-
tial,

- never fi t one mat on top of
another.



Front door

The front door pockets can hold ob-
jects equivalent in volume to a 1.5 litre
bottle.
They may have their own lighting,
which comes on automatically when
your hand approaches.
This lighting goes out automatical-
ly after a few moments when your
hand is taken away.


Rear door

The rear door pockets can hold
objects equivalent in volume to a
0.5 litre bottle.
USB BOX


This connection box, consisting of an
auxiliary JACK socket and a USB port,
is located on the centre console.
It permits the connection of portable
equipment, such as a digital audio
player of the iPod
® or USB memory
stick type.
It reads the audio fi le formats which are
transmitted to your audio equipment
and played via the vehicle's speakers.
You can manage these fi les using the
steering mounted controls or the audio
equipment control panel and display
them on the multifunction screen.

When it is in use, the portable equip-
ment charges automatically.

For more information on the use of
this equipment, refer to the "Audio
and Telematics" section.

Downloaded from www.Manualslib.com manuals search engine VI
109
FITTINGS
AIRCRAFT-STYLE REARTABLES

Rear table stowed


Rear table opened


The backrests of the front seats are
fi tted with aircraft-style tables. These
incorporate a cup-holder A
and a
retaining strap B
, for the placing of
objects.


)
Pull the table downwards to
open.

)
To stow the table, raise it until
the latch locks.

For safety reasons, these tables col-
lapse downwards if excessive pressure
is exerted on them.

Reading lamps C
may be fi tted in
the front seat backrests, behind the
tables. They illuminate the surface
of the tables without disturbing the
other passengers.
They can be used only while the table
is down.


)
Press the "on/off" button to turn
the lamp on or off.

SECOND ROW FOOTWELL


Depending on the confi guration, the
vehicle has one or two storage com-
partments under the footwell, locat-
ed between the seats of the fi rst and
second rows. They can be accessed
via clipped fl aps with a handle A
.
The compartment on the left-hand
side may contain the temporary
puncture repair kit and the tool kit
may be stored in the compartment
on the right-hand side. In this case
the fl ap is secured by means of a
screw B
. To gain access to the com-
partment, turn the screw a quarter
turn anticlockwise using a coin.
On vehicles fi tted with pneumatic
suspension, the left-hand fl ap is
locked.


Individual reading lamps

Downloaded from www.Manualslib.com manuals search engine VI
114
FITTINGS
CARGO NET(GRAND C4 PICASSO)

This enables you to maximise the
vehicle’s loadspace.
It retains objects, preventing them
from sliding towards the front of the
passenger compartment.

You insert it under the luggage-
cover roller securing it on the
third-row side mouldings.




Position 1

5-seat confi guration: installed behind
the second row.

Installing the roller



)
Remove the protective covers
located under the blind roller
notches.

)
Position the roller under that of
the luggage-cover blind.

)
Raise the fl ap on the blind, posi-
tioning it on top of the blind.

)
Deploy the net, passing it be-
tween the rollers and the seats.

)
Pull the net upwards.

)
Anchor it to the roof by means of
the fi xing points (after you have
removed their covers).

Removing the roller



)
Carry out these operations in re-
verse order.



Position 2

2-seat confi guration; installed be-
hind the fi rst row.

Removing the roller



)
Carry out these operations in re-
verse order.

Installing the roller



)
With the second-row seats fold-
ed away, remove the covers of
the Isofi x mounting points locat-
ed on the seat backrests.

)
Secure the roller on the Isofi x
mounting points.

)
Deploy the net and pull it up-
wards.

)
Anchor it to the roof by means of
the fi xing points (after you have
removed their covers).

Downloaded from www.Manualslib.com manuals search engine VI
11 5
FITTINGS
LUGGAGE ANCHORING
RINGS (C4 PICASSO)

There are 4 anchoring rings in the
boot to enable you to secure your
luggage:


- 1, 2, 3
and 4
on the boot fl oor.

LUGGAGE ANCHORINGRINGS (GRAND C4 PICASSO)


There are 4 anchoring rings in the
boot to enable you to secure your
luggage:


- 1, 2, 3
and 4
on the boot fl oor.
For reasons of safety in the event of
sudden braking, it is recommended
that you place heavy objects on
the fl oor as:m! close as possible
to the backrests of the second-row
seats.
LUGGAGE RETAINING NET (GRAND C4 PICASSO)
Attached to the luggage anchoring
rings, it allows objects to be held on
the boot fl oor.

Downloaded from www.Manualslib.com manuals search engine VII
11 9
CHILD SAFETY
CHILD SEATS RECOMMENDED BY CITROËN
CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt
:


Group 0+: from birth to 13 kg



Groups 1, 2 and 3: from 9 to 36 kg









L1

"RÖMER Baby-Safe Plus"
Installed in the rearwards-facing
position.







L2

"KIDDY Comfort Pro"
The impact shield must be used
for carrying young children
(from 9 to 18 kg).


Groups 2 and 3: from 15 to 36 kg








L3

"RECARO Start''






L4

"KLIPPAN Optima"
From the age of 6 years
(approximately 22 kg), the booster
is used on its own.







L5

"RÖMER KIDFIX"
Can be fi tted to the vehicle's ISOFIX mountings.
The child is restrained by the seat belt.

Downloaded from www.Manualslib.com manuals search engine VII
120
CHILD SAFETY

*
Applies only to the CITROËN Grand C4 Picasso.
LOCATIONS FOR CHILD SEATS SECURED WITH THE VEHICLE SEAT BELT

In conformity with European law, this table tells you to what extent each of the seat positions in your vehicle may take a
child seat that is secured with the vehicle seat belt and approved as Universal (a), according to the weight of the child and
the position in the vehicle.
(a) Universal child seat: child seat which can be installed in all vehicles by means of the seat belt.
(b) Group 0: from birth to 10 kg. Shell seats and "car cots" cannot be installed on the front passenger seat.
(c) Consult the legislation in force in your country before installing your child on this seat.

U
: seat position suitable for the installation (in conjunction with the vehicle seat belt) of a universal rearwards-facing and/or
forwards-facing child seat.

For seats in groups 1, 2 and 3, check that the child seat is correctly secured on the backrest of the vehicle seat. If
necessary, remove and stow the head restraint.
To install a voluminous child seat in the 2nd or 3rd row, move the rear seat fully back so as to avoid interference with the
front seat.



Seat position



Weight groups established by legislation




< 10 kg and < 13 kg

(groups 0 (b) and 0+)

9 – 18 kg

(group 1)

15 – 25 kg

(group 2)

22 – 36 kg

(group 3)


1st
row


Front passenger
(c)

U



U



U



U




2nd row

Outer


U



U



U



U



Centre


U



U



U



U




3rd row
*


Outer


U



U



U



U

Downloaded from www.Manualslib.com manuals search engine VII
121
CHILD SAFETY

*
According to country and current
local legislation.
ADVICE ON CHILD SEATS


Installing a booster seat
The chest part of the seat belt must
be positioned on the child's shoul-
der without touching the neck.
Ensure that the lap part of the
seat belt passes correctly over the
child's thighs.
CITROËN recommends the use of
a booster seat which has a back,
fi tted with a seat belt guide at
shoulder level.
As a safety precaution, do not leave:


- one or more children alone and
unsupervised in a vehicle,

- a child or an animal in a vehicle
which is exposed to the sun, with
the windows closed,

- the keys within reach of children
inside the vehicle.
To prevent accidental opening of the
doors, use the "Child lock".
Take care not to open the rear win-
dows by more than one third.
To protect young children from the
rays of the sun, fi t side blinds on the
rear windows.
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
When installing a child seat using the
seat belt, check that the seat belt is
tightened correctly on the child seat
and that it secures the child seat
fi rmly on the seat of your vehicle.

Remember to fasten the seat belts or
the child seat harnesses keeping the
slack
in relation to the child's body to
a minimum, even for short journeys.
For optimum installation of the "for-
wards-facing" child seat, ensure
that the back of the child seat is in
contact with the back of the vehicle's
seat and that the head restraint does
not cause any discomfort.
If the head restraint has to be re-
moved, ensure that it is stored or
attached securely to prevent it from
being thrown around the vehicle in
the event of sharp braking. Children under the age of 10 must
not travel in the "forwards-facing"
position on the front passenger seat,
unless the rear seats are already oc-
cupied by other children, cannot be
used or are absent.
Deactivate the passenger airbag *
when a "rearwards-facing" child
seat is installed on the front seat.
Otherwise, the child would risk be-
ing seriously injured or killed if the
airbag were to infl ate.

Downloaded from www.Manualslib.com manuals search engine VII
122
CHILD SAFETY
"ISOFIX" MOUNTINGS

Your vehicle has been approved in
accordance with the latest ISOFIX
regulation s.
The three second row seats are fi tted
with regulation ISOFIX mountings. There are three rings for each seat:


- two rings A
, located between the
vehicle seat back and cushion,
indicated by a label,

- a ring B
, used to fi x the upper
strap, referred to as the TOP
TETHER
, indicated by a label
on a cover at the top of the seat
back. This ISOFIX mounting system pro-
vides fast, reliable and safe fi tting of
the child seat in your vehicle.
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
For information on installing ISOFIX
child seats in your vehicle, refer to the
table showing the locations that can
be used for ISOFIX child seats.
ISOFIX child seats
are fi tted with
two latches which are secured easily
on the two rings A
.
Some also have an upper strap

which is attached to the ring B
.
To attach this strap, remove the ve-
hicle seat's head restraint and the
cover at the top of the seat back.
Then fi x the hook on the ring B
and
tighten the upper strap.