2010 Citroen C4 DAG tyre pressure
[x] Cancel search: tyre pressurePage 1 of 284
4
F A M I L I A R I S A T I O N
E X T E R I O R
Directional headlamps
This lighting function automatically
improves forward vision when cor-
nering. Lane departure warning
system
Above 50 mph, this system is activated
automatically if you inadvertently wander
from your lane.
Parking sensors, front/rear
This system warns you if an obsta-
cle is detected when manoeuvring
the vehicle.
Guide-me-home lighting
The headlamps stay on for a short
period after switching off the ignition.
74
73
121
Vehicle maintenance
When washing your vehicle, hold
the end of the high pressure nozzle
more than 30 centimetres from the
s e l f - a d h e s i v e fi l m fi n i s h e r s .
Temporary puncture repair kit
This kit is a complete system, consis-
ting of a compressor and an integral
sealant product, for the temporary re-
pair of a tyre.
120
136
Page 118 of 284
96
VIII
S A F E T Y
TYRE UNDER-INFLATION DETECTION
S e n s o r s fi t t e d i n e a c h v a l v e c h e c k
the tyre pressure during driving and
trigger a warning in the event of
malfunction (speed above 12 mph
(20 km/h)).
U n d e r - i n fl a t e d t y r e T h e t y r e u n d e r - i n fl a t i o n d e t e c t i o n
system is an aid to driving which
does not replace the vigilance or
responsibility of the driver. Puncture
The service warning lamp
comes on in the instru-
ment panel, accompanied
by an audible signal and
a message on the multi-
function screen locating
the wheel concerned.
Check the tyre pressures as soon as
possible. This check must be carried
out when the tyres are cold. The
STOP warning lamp
comes on in the instru-
ment panel, accompanied
by an audible signal and
a message on the multi-
function screen locating
the wheel concerned.
Stop immediately, avoiding any sud-
den movement of the steering wheel
and the brakes.
Change the damaged wheel (punctured
o r v e r y d e fl a t e d t y r e ) , a n d h a v e t h e t y r e
pressure checked as soon as possible.
S e n s o r ( s ) n o t d e t e c t e d o r f a u l t y
The service warning
lamp comes on in the
instrument panel, ac-
companied by an audible
signal and a message on
the multifunction screen
locating the wheel or wheels which
are not detected or indicating a fault
in the system.
Have the faulty sensor(s) checked
by a CITROËN dealer. All repairs and changing of tyres
o n a w h e e l fi t t e d w i t h t h i s s y s t e m
must be carried out by a CITROËN
dealer.
If, when changing a tyre, you in-
stall a wheel which is not detected
b y y o u r v e h i c l e ( e x a m p l e : fi t t i n g
of snow tyres), you must have the
system reinitialised by a CITROËN
dealer.
This system does not avoid the
need to have the tyre pressures
checked regularly (refer to the
" T e c h n i c a l d a t a - § I d e n t i fi c a t i o n
markings" section) to ensure that
the optimum dynamic performance
of the vehicle is maintained and
prevent premature wear of the
tyres, particularly in arduous driv-
ing conditions (heavy load, high
speed).
The tyre pressures must be
checked cold, at least once a
month. Remember to check the
pressure of the spare wheel.
T h e t y r e u n d e r - i n fl a t i o n d e t e c t i o n
s y s t e m m a y e x p e r i e n c e t e m p o r a r y
interference due to electro-magnetic
signals on a frequency close to that
used by the system.
This message is also displayed
when one of the wheels is away
from the vehicle (being repaired) or
when one or more wheels without a
s e n s o r a r e fi t t e d .
T h e s p a r e w h e e l i s n o t fi t t e d w i t h a
sensor.
Page 119 of 284
97
VIII
S A F E T Y
BRAKING ASSISTANCE SYSTEMS
Group of supplementary systems
which help you to obtain optimum
braking in complete safety in emer-
gency situations:
- anti-lock braking system (ABS),
- electronic brake force distribution (EBFD),
- emergency braking assistance (EBA).
A n t i - l o c k b r a k i n g s y s t e m
and electronic brake force
distribution
Linked systems which improve the
stability and manoeuvrability of your
vehicle when braking, in particular
on poor or slippery surfaces.
Activation
The anti-lock braking system comes
into operation automatically when
there is a risk of wheel lock.
Normal operation of the ABS may
make itself felt by slight vibration of
the brake pedal. Operating fault
When braking in an emergency,
p r e s s v e r y fi r m l y w i t h o u t r e l e a s i n g
the pressure. If this warning lamp comes
on, accompanied by an au-
dible signal and a message
on the multifunction screen,
it indicates a malfunction of the anti-
lock braking system which could re-
sult in loss of control of the vehicle
when braking.
If this warning lamp comes
on, together with the STOP
and ABS warning lamps,
accompanied by an audible
signal and a message on the multi-
function screen, it indicates a mal-
function of the electronic brake force
distribution which could result in loss
of control of the vehicle when brak-
ing.
You
must
stop as soon as it is
safe to do so.
In either case, contact a CITROËN
dealer.
When replacing wheels (tyres and
rims), ensure that they conform to
the manufacturer's recommenda-
tions.
E m e r g e n c y b r a k i n g a s s i s t a n c e
System which, in an emergency,
enables you to obtain the optimum
braking pressure more quickly, thus
reducing the stopping distance.
Activation
It is triggered by the speed at which
the brake pedal is pressed.
The effect of this is a reduction in
the resistance of the pedal and an
i n c r e a s e i n b r a k i n g e f fi c i e n c y .
When braking in an emergency,
p r e s s fi r m l y w i t h o u t r e l e a s i n g t h e
pressure.
Page 161 of 284
137
XI
P R A C T I C A L I N F O R M A T I O N
S w i t c h o n t h e c o m p r e s s o r b y
moving the switch B to posi-
tion "I" u n t i l t h e t y r e p r e s s u r e
r e a c h e s 2 . 0 b a r s . If after around 5 to 7 minutes the
pressure is not attained, this indicates
t h a t t h e t y r e i s n o t r e p a i r a b l e ; c o n t a c t
a C I T R O Ë N d e a l e r f o r a s s i s t a n c e .
Remove the kit and rescrew the
c a p o n t h e w h i t e p i p e . T a k e c a r e
t o a v o i d s t a i n i n g y o u r v e h i c l e
w i t h t r a c e s o f fl u i d . K e e p t h e k i t
t o h a n d .
D r i v e i m m e d i a t e l y f o r a p p r o x i m a t e -
l y t h r e e m i l e s ( fi v e k i l o m e t r e s ) , a t
r e d u c e d s p e e d ( b e t w e e n 1 5 a n d
3 5 m p h [ 2 0 a n d 6 0 k m / h ] ) , t o p l u g
t h e p u n c t u r e .
Stop to check the repair and the
t y r e p r e s s u r e u s i n g t h e k i t . Checking tyre pressures/
I n fl a t i n g a c c e s s o r i e s
You can use the compressor, with-
out injecting the product, for the
routine check and adjustment of
t h e t y r e p r e s s u r e s o n y o u r v e h i c l e .
I t c a n a l s o b e u s e d t o i n fl a t e o t h e r
i t e m s s u c h a s a b a l l o r b i c y c l e t y r e .
Turn the selector to the "AIR" posi-
tion, connect the black pipe to the
valve of the wheel or the item to
b e i n fl a t e d w i t h , i f n e c e s s a r y , o n e
of the connectors supplied with the
kit, then follow the remainder of the
procedure below until the kit is re-
m o v e d .
Turn the selector A to
the "AIR" position:
Connect the black pipe D to the
v a l v e o f t h e w h e e l .
Page 195 of 284
169
XII
T E C H N I C A L D A T A
IDENTIFICATION MARKINGS
Various visible marking components
f o r v e h i c l e i d e n t i fi c a t i o n a n d s e a r c h e s .
T h e v e h i c l e i d e n t i fi c a t i o n n u m b e r
is also indicated on the registration
document.
All CITROËN genuine replacement
parts are available exclusively within
the dealer network.
For your safety and in order to re-
main within the terms of the war-
ranty, you are advised to use only
CITROËN replacement parts . A. Manufacturer’s label
1. EU type approval number.
2.
V e h i c l e I d e n t i fi c a t i o n N u m b e r ( V I N ) .
3. Gross vehicle weight.
4. Gross train weight.
5. Maximum weight on front axle.
6. Maximum weight on rear axle. B. Vehicle Identification
Number (VIN)
Located on bodywork and behind
windscreen.
C. Paint colour code
Tyre reference
Tyre pressures
Located on the driver's door interior
pillar.
Use the tyre pressures recom-
mended by CITROËN.
Check the tyre pressures when the
tyres are cold, on a frequent basis.
Never reduce the pressure of a hot
tyre.
If replacing your tyres, it is essen-
tial to use the tyre sizes that are
recommended for your vehicle.