i !
!
Practical information
110
Towing the vehicle
Procedure for having your vehicle towed using fixed mechanical equipment.
To w i ng your vehicle
The towing eye is welded to the body below
the front bumper. ) Install the towing bar. )
Start your vehicle ("Ready" lamp on). )
Put the drive selector in position N . )
Release the parking brake. )
Switch on the hazard warning lamps onyour vehicle. )
Have your vehicle towed for no more than 20 miles (30 km) without exceeding a speed of 20 mph (30 km/h)
.
When towing the vehicle with the four wheels on the ground, always use a towing bar.
When towing with only two wheels onthe ground, use professional lifting equipment.
Failure to follow these instructions may cause damage to braking components and the electric motor.
Changing
a wiper blade
Removing a front or rear
wiper blade
)Raise the corresponding wiper arm. )Remove the wiper blade, sliding it towards
the outside.
Fitting a front or rear wiper
blade
)Put the new wiper blade in place and
secure it. )Fold down the wiper arm carefully.
To w i ng another vehicle
Your vehicle cannot be used in any circumstances to tow another vehicle.
