2010 CHEVROLET SILVERADO automatic transmission fluid

[x] Cancel search: automatic transmission fluid

Page 9 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual A.Outlet Adjustment on page 4‑28.
B. Turn Signal/Multifunction Lever on page 4‑4.
C. Driver Information Center (DIC) Buttons. See Driver Information Center (DIC) on page 4‑49.
D. Hazard Warning

Page 11 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual A.Outlet Adjustment on page 4‑28.
B. Turn Signal/Multifunction Lever on page 4‑4.
C. Instrument Panel Cluster on page 4‑29.
D. Hazard Warning Flashers
on page 4‑3.
E. Shift Lever. See Automati

Page 270 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual Fuel Used
Press the trip/fuel button until FUEL USED displays.
This display shows the number of gallons (gal) or
liters (L) of fuel used since the last reset of this menu
item. To reset the fuel used

Page 276 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual Transmission Temperature
Press the trip odometer reset stem until TRANS TEMP
displays. This display shows the temperature of the
automatic transmission fluid in either degrees
Fahrenheit (°F) or degr

Page 441 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine
3. Shift into a gear
4. Release the parking brake
5. Let up on the brake pedal.
6. Drive slowly until the trailer

Page 445 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual Section 6 Service and Appearance Care
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Accessories and Modifications . . . . . . . . . . . . . . . .

Page 461 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual A.Engine Air Cleaner/Filter on page 6‑21.
B. Coolant Surge Tank and Pressure Cap. See Cooling System on page 6‑29.
C. Positive (+) Terminal. See Jump Starting
on
page 6‑44.
D. Battery on page 6

Page 467 of 626

CHEVROLET SILVERADO 2010 2.G Owners Manual 3. Remove the engine air cleaner/filter from thehousing. Care should be taken to dislodge as little
dirt as possible.
4. Clean the engine air cleaner/filter sealing surfaces and the housing.
5. Inspec
Page:   1-8 9-16 17-24 next >