Adjusting clutch-lever
play
Push back boot1.
Slacken nut2.
To increase clutch play: turnadjusting screw3clockwise.
To reduce clutch play: turn ad-justing screw3counter-clock-wise.
Checking clutch-lever play(73).
Repeat the steps in this pro-cedure until clutch play is setcorrectly.
Tighten nut2.
Pull boot1back over the ad-justing screw.
Tyres
Checking tyre tread depth
Your motorcycle's handlingand grip can be impairedeven before the tyres wear tothe minimum tyre tread depthpermitted by law.
Have the tyres changed in goodtime before they wear to theminimum permissible treaddepth.
Make sure the ground is leveland firm and place the motor-cycle on its stand.
Measure the tyre tread depthin the main tread grooves withwear marks.
Tyres have wear indicatorsintegrated into the maintread grooves. The tyre is wornout when the tyre tread has worndown to the level of the marks.
The locations of the marks areindicated on the edge of the tyre,e.g. by the letters TI, TWI or byan arrow.
If the tyre tread is worn to minim-um:
Replace tyre or tyres, as applic-able.
Rims
Checking rims
Make sure the ground is leveland firm and place the motor-cycle on its stand.
Visually inspect the rims fordefects.
Have damaged rims checkedand, if necessary, replaced by aspecialist workshop, preferablyan authorised BMW Motorraddealer.
8
74
zMaintenance
BMW Motorrad recommendsBMW tar remover for removingspecks of tar. Remember to waxthe parts treated in this way.
Protective wax coating
BMW Motorrad recommendsapplying only BMW car wax orproducts containing carnaubawax or synthetic wax.
It is time to rewax the paint-work when water "puddles" onthe surface, instead of formingbeads.
Laying up motorcycle
Clean the motorcycle.
Remove the battery.
Spray the brake and clutchlever pivots, the side standpivots and the centre standpivots (if the motorcycle is fit-ted with a centre stand) with asuitable lubricant.
Coat bright metal and chrome-plated parts with an acid-freegrease (e.g. Vaseline).
Stand the motorcycle in a dryroom in such a way that thereis no load on either wheel.
Before laying the vehicleup out of use, have the en-gine oil and the oil filter elementchanged by a specialist work-shop, preferably an authorisedBMW Motorrad dealer. Com-bine work for laying up/restoringto use with a BMW service orinspection.
Restoring motorcycle
to use
Remove outer preservation.
Clean the motorcycle.
Install operational battery.
Before starting: work throughthe checklist.
9
104
zCare
