
Things to remember when driving
116
Things to remember when driving
Break-in period
Moving parts need breaking-in time to adjust to 
each other. Please follow the instructions below 
in order to achieve the optimal service life and 
economy of operation for your vehicle.
Engine and differential
Always obey all official speed limits.
Up to 1,200 miles/2,000 km
Drive at varying engine and road speeds but do 
not exceed:
>Gasoline engine
4,500 rpm or 100 mph/160 km/h
>Diesel engine
3,500 rpm or 93 mph/150 km/h
Avoid full-throttle operation and use of the 
transmission's kickdown mode.
After driving 1,200 miles/2,000 km
Engine and vehicle speeds can be gradually 
increased.
Tires
Due to technical factors associated with their 
manufacture, tires do not achieve their full trac-
tion potential until after an initial break-in 
period. Therefore, drive cautiously during the 
first 200 miles/300 km.
Brake system
Brakes require an initial break-in period of 
approx. 300 miles/500 km to achieve optimized 
contact and wear patterns between brake pads 
and rotors. Drive cautiously during this break-in 
period.
Clutch
The function of the clutch reaches its optimal 
level only after a distance driven of approx. 
300 miles/500 km. During this break-in period, 
engage the clutch gently.
Following part replacement
The same break-in procedures should be 
observed if any of the components mentioned 
above have to be renewed in the course of the 
vehicle's operating life.
Saving fuel
The fuel consumption of your vehicle depends 
on several factors. You can lower fuel consump-
tion and the environmental impact by taking 
certain measures, adjusting your driving style 
and having the vehicle serviced regularly.
Remove any unneeded cargo
Additional weight increases fuel consumption.
Remove any mounted parts after you 
have finished using them
Remove unneeded additional mirrors, the roof 
rack and the rear luggage rack after use. 
Mounted parts affect the vehicle's aerodynam-
ics and increase fuel consumption.
Close the windows and glass roof
An open glass roof or window causes higher air 
resistance and thus increases fuel consump-
tion.
Check tire inflation pressure regularly
Check the tire inflation pressure at least twice a 
month and before embarking on a long journey, 
and correct it if necessary.
Low tire inflation pressure causes higher rolling 
resistance and thus increases fuel consumption 
and tire wear.
Set off immediately
Do not let the engine warm up while the car is 
still standing, but set off immediately at moder-
ate engine speed. This is the fastest way for the 
cold engine to reach its operating temperature. 

Things to remember when driving
118 for a short period after the engine is switched 
off.
Hydroplaning
When driving on wet or slushy roads, 
reduce road speed. If you do not, a wedge 
of water can form between tires and road sur-
face. This situation, known as hydroplaning, 
means that the tire can completely lose contact 
with the road surface, so that neither the car can 
be steered nor the brake be properly applied.<
The risk of hydroplaning increases with declin-
ing tread depth on the tires, refer also to Mini-
mum tread depth on page215.
Driving through water
Drive through water on the road only if it is 
not deeper than 1 ft/30 cm, and then only 
at walking speed at the most. Otherwise, the 
vehicle's engine, the electrical systems and the 
transmission may be damaged.<
Use the parking brake on inclines
On inclines, do not hold the vehicle for a 
lengthy period using the clutch; use the 
parking brake instead. Otherwise, greater 
clutch wear will result.<
For more information about the drive-off assis-
tant, refer to page84.
Braking safely
Your BMW is equipped with ABS as a standard 
feature. Applying the brakes fully is the most 
effective way of braking in situations in which 
this is necessary. Since the vehicle maintains 
steering responsiveness, you can still avoid 
possible obstacles with a minimum of steering 
effort.
Pulsation of the brake pedal, combined with 
sounds from the hydraulic circuits, indicate that 
ABS is in its active mode.
Driving in wet conditions
When roads are wet or there is heavy rain, 
briefly exert gentle pressure on the brake pedal 
every few miles. Monitor traffic conditions to 
ensure that this maneuver does not endanger other road users. The heat generated in this 
process helps dry the pads and rotors to ensure 
that full braking efficiency will then be available 
when you need it.
Hills
To prevent overheating and the resulting 
reduced efficiency of the brake system, 
drive long or steep downhill gradients in the 
gear in which the least braking is required. Even 
light but consistent brake pressure can lead to 
high temperatures, brake wear and possibly 
even brake failure.<
You can increase the engine's braking effect by 
shifting down, all the way to first gear if neces-
sary. This strategy helps you avoid placing 
excessive loads on the brake system. Down-
shifting in manual mode of the automatic trans-
mission, refer to page57.
Never drive with the clutch held down, 
with the transmission in neutral or with 
the engine switched off; otherwise, engine 
braking action will not be present or there will be 
no power assistance to the brakes or steering. 
Never allow floor mats, carpets or any other 
objects to protrude into the area around the 
pedals; otherwise, pedal function could be 
impaired.<
Corrosion on brake rotors
When the vehicle is driven only occasionally, 
during extended periods when the vehicle is not 
used at all, and in operating conditions where 
brake applications are less frequent, there is an 
increased tendency for corrosion to form on 
rotors, while contaminants accumulate on the 
brake pads. This occurs because the minimum 
pressure which must be exerted by the pads 
during brake applications to clean the rotors is 
not reached.
Should corrosion form on the brake rotors, the 
brakes will tend to respond with a pulsating 
effect that even extended application will fail to 
cure. 

Reference 255
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Average fuel consumption71
– setting the units73
Average speed71
Avoid highways in 
navigation134
Avoiding unintentional 
alarms34
Axle loads, refer to 
Weights247
B
Backrest contour, refer to 
Lumbar support43
Backrests, refer to Seat 
adjustment42
Backrest width adjustment43
Back seats
– refer to Rear seats44
Backup lamps
– replacing bulb233,234
Band-aids, refer to First aid 
pouch237
Bar, refer to Towing 
methods240
Base plate for telephone or 
mobile phone
– refer to Snap-in adapter184
– refer to Snap-in adapter in 
the center armrest storage 
compartment106
Bass, tone setting144
Battery235
– charging235
– disposal35,236
– jump-starting238
– remote control26
– replacing235
– temporary power failure236
Battery for mobile phone185
Battery renewal
– remote control35
– remote control for vehicle35
Being towed240
Belts, refer to Safety belts46
Belt tensioner, refer to Safety 
belts46
Beverage holders, refer to 
Cupholders107Blower, refer to Air volume98
Bluetooth, activating/
deactivating176
BMW
– car shampoo227
BMW Advanced Diesel198
BMW Assist188
BMW Assist, 
activating190,192
BMW Homepage4
BMW Maintenance 
System223
BMW Search190
BMW webpage4
Bottle holders, refer to 
Cupholders107
Brake Assist, refer to Dynamic 
Brake Control DBC82
Brake fluid, refer to Service 
requirements73
Brake Force Display89
Brake lamps
– Brake Force Display89
– replacing bulb233,234
Brake pads116
– breaking in116
Brake rotors118
– brakes116
– breaking in116
Brakes
– ABS82
– BMW Maintenance 
System223
– Brake Force Display89
– breaking in116
– parking brake56
– service requirements73
Brakes, refer to Braking 
safely118
Brake system116
– BMW Maintenance 
System223
– breaking in116
– disc brakes118
Breakdown services, refer to 
Roadside Assistance237
Breaking in the clutch116Breaking in the differential, 
refer to Engine and 
differential116
Break-in period116
Brightness of the Control 
Display80
Bulb changing, refer to Lamps 
and bulbs229
Button for starting the engine, 
refer to Start/stop button54
Buttons on the steering 
wheel11
C
California Proposition 65 
warning5
Call
– accepting177
– ending178
– rejecting178
Calling, refer to Phone 
numbers, dialing178
Can holders, refer to 
Cupholders107
Capacities248
Capacity of the cargo area247
Car battery, refer to Vehicle 
battery235
Car care, refer to Care225