Page 221 of 271

CAR MAINTENANCE
219
ADDITIONAL
OPERATIONS
Every 1000 kmor before long journeys,
check and if necessary top up:
– engine coolant fluid level
– brake/hydraulic clutch control fluid level
– power steering fluid level
– windscreen washer and headlamp wash-
er fluid level
– tyre pressure and conditions.
Every 3000 kmcheck and if necessary
top up the engine oil level.
The use of FL Seleniaproducts is rec-
ommended which have been designed and
made expressly for Alfa Romeo cars (see
“Refuelling” in the “Technical Specifica-
tions” chapter).
ANNUAL INSPECTION
PROGRAMME
For cars with an annual mileage
of below 20,000 km (for example
about 10,000 km) the following
yearly inspection programme is ad-
vised:
– Check tyre conditions/wear and if nec-
essary adjust the pressure (including spare
wheel)
– Check operation of lighting system
(headlights, direction indicators, hazard
warning lights, boot, passenger compart-
ment, glovebox lights, warning lights, etc.)
– Check operation of windscreen wiper
system, spray jet adjustment
– Check windscreen blade position/wear
– Check front disk brake pad conditions
and wear
– Check cleanness of bonnet and boot
locks, and lever cleanness and lubrication.– Sight check for conditions of: engine,
gearbox, transmission, pipes (exhaust - fu-
el supply - brakes), rubber parts (boots -
sleeves - bushes etc..), brake and fuel sup-
ply system hoses
– Check battery charge
– Sight check for conditions of various dri-
ve belts
– Check and if necessary top up fluid lev-
els (engine coolant, brakes, windscreen
washer, battery etc. )
– Change engine oil and oil filter
– Change pollen filter.
Page 228 of 271

CAR MAINTENANCE
226
The cooling system is
pressurised. If necessary,
replace the cap only with
another genuine one, otherwise
system efficiency could be compro-
mised. Do not remove the reservoir
cap when the engine is hot: you
risk scalding yourself.
The cooling system uses
PARAFLU UP antifreeze.
Do not add fluid having dif-
ferent specifications from that al-
ready existing. PARAFLU UP can-
not be mixed with other types of
fluids. Should other fluids be
added, do not start the engine and
contact Alfa Romeo Authorized
Services as soon as possible.ENGINE COOLANT FLUID
(fig. 10)
Do not remove the cap
when the engine is hot:
danger of burns.
The level of the coolant in the header tank
(reservoir) should be checked with the en-
gine cold and the car on a level surface and
it should be between the MINandMAX
marks on the tank.
fig. 10
A0A0240b
If the level is low, loosen the header tank
cap (A) and slowly pour a mixture of 50%
distilled water and 50% PARAFLU UP FL
Seleniathrough the filler neck until near-
ing the MAXmark.
The antifreeze mixture of 50% PARAFLU
UPand 50% distilled water guarantees pro-
tection down to –35 °C.
Page 254 of 271

REFILLING
2.0JTS
Selespeed
63 (
▲)
7 (▲)
7,2
4.4
(❍)
2.0
0.6
1.2
0.52
2.5
4.2
3.2V6
63 (▲)
7 (▲)
7.2
5.9
(❍)
2.0
–
1.2
0.52
2.5
4.2
1.8 T.
SPARK
63 (▲)
7 (▲)
7.2
4.4 (❏)
2.0
–
1.2
0.52
2.5
4.2
2.0JTS
63 (
▲)
7 (▲)
7.2
4.4
(❍)
2.0
–
1.2
0.52
2.5
4.2TECHNICAL SPECIFICATIONS
252
JTD16V
63 (■)
7 (■)
7.2
4.5 (
●)
2.0
–
1.2
0.52
2.5
4.2
Fuel tank: litres
– including a reserve of litres
Engine cooling
system litres
Oil sump and filter litres
Mechanical transmission/
differential litres
Selespeed transmission litres
Hydraulic power steering litres
Hydraulic brake circuit
with ABSlitres
Windscreen washer and rearscreen
washer fluid reservoir litres
– with headlamp washer litresRecommended products and
genuine lubricants
(▲)Unleaded petrol with no less than
95 R.O.N
(■)Diesel fuel for motor vehicles
(Specification EN590)
Mixture of distilled water
andPARAFLU UP at 50%
(❏)SELENIA 20 K for Alfa Romeo
(❍)SELENIA RACING(●)SELENIA WR
TUTELA CAR TECHNYX
TUTELA CAR CS SPEED
TUTELA GI/A
TUTELA TOP 4
for Alfa Romeo
Mixture of water and fluid
TUTELA
PROFESSIONAL SC 35
Page 255 of 271

TECHNICAL SPECIFICATIONS
253
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Should non-genuine products be used, lubricants with minimum ACEA A3 properties for petrol engines and ACEA B4 for Diesel engines are tolerated; in this
event top engine performance is not guaranteed.
Using low-quality products, not compliant with ACEA A3 and ACEA B4 properties and specifications could cause engine damages not covered by warranty.
For very cold temperatures, consult Alfa Romeo Authorised Services for the proper Seleniaproduct to use.
SELENIA 20K for
ALFA ROMEO
SELENIA RACING
SELENIA WRAs per Service
Schedule
As per Service
Schedule
As per Service
Schedule Use Fluid and lubricant specifications Genuine fluids Change
for correct car operation and lubricants intervals
Lubricants for
petrol engines
1.8 T. SPARK
Lubricants for
petrol engines
2.0 JTS - 3.2
V6
Lubricants for
Multijet engines
Synthetic-based oils, grade SAE 10W-40
FIAT 9.55535-G2qualification
Synthetic-based oil, grade SAE 10W-60
FIAT 9.55535-H3qualification
Synthetic-based oil, grade SAE 5W-40
FIAT 9.55535-N2qualification.