2010 Alfa Romeo Brera/Spider oil

Engine oil consumption
Max engine oil consumption is usually
400 grams every 1000 km.
When the car is new, the engine needs
to run in, therefore the engine oil con-
sumption can only be considered sta-
bilised after the first 5000 - 6000 km.
IMPORTANTThe oil consumption de-
pends on driving style and the conditions
under which the car is used.
IMPORTANTDo not add oil with
specifications other than that already
in the engine. Topping up engine oil
If the oil level is near or even below the
MINmark, add oil through the filler
neckB, until reaching the MAXmark.
Oil level shall never exceed the MAX
mark.
IMPORTANT If a routine check re-
veals that the oil level is above the
MAXmark, contact Alfa Romeo Au-
thorized Services to have the correct lev-
el restored.
IMPORTANT After adding or chang-
ing the oil, let the engine turn over for
a few seconds and wait a few minutes
after turning it off before you check the
level.
218
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
When the engine is hot,
take care when work-
ing inside the engine compart-
ment to avoid burns. Remem-
ber that when the engine is
hot, the fan may cut in: danger
of injury. Scarves, ties and
other loose clothing might be
pulled by moving parts.
WARNING
Used engine oil and fil-
ter contain harmful sub-
stances for the environ-
ment. Contact Alfa Romeo Au-
thorized Services to have the oil
and filter changed.

234
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
INTERIOR PLASTIC PARTS
Clean plastic parts with a cloth
mositened with water and non-abrasive
neutral detergent. To remove grease or
hard stains, use appropriate products de-
signed to preserve the appearance of
components.
IMPORTANTNever use spirit or pe-
troleum to clean the instrument panel
or other plastic parts.Never use flammable
products like oil ether
or rectified petrol for cleaning
car interiors. Electrostatic dis-
charges generated by rubbing
during cleaning operations
could cause fire.
WARNING
Do not keep aerosol
cans in the car: they
might explode. Aerosol cans
must never be exposed to a
temperature above 50°C. The
temperature inside the car ex-
posed to the sun may go well
beyond that figure.
WARNING
STEERING WHEEL/GEAR
LEVER KNOB WITH
GENUINE LEATHER
COVERING
(for versions/markets,
where provided)
These components shall only be cleaned
with water and neutral soap. Never use
spirit or alcohol-based products.
Before using special products for clean-
ing interiors, read carefully label in-
structions and indications to make sure
they are free from spirit and/or alcohol-
based substances.
If when cleaning the windscreen with
special glass products, some drops fall
on the leather covering of the steering
wheel/gear lever knob remove them
immediately and then clean with wa-
ter and neutral soap.
IMPORTANTTake the utmost care
when engaging the steering lock to pre-
vent scratching the leather covering.

For diesel engines, in the event of emergencies when genuine products are not available, lubricants providing at least ACEA B4 or
ACEA C2 performance are allowed; in that case, engine best performance is not guaranteed; we recommend to have it replaced as
soon as possible with the recommended lubricants by the Alfa Romeo Authorized Services.
Use of products with low-quality properties than ACEA A3 and ACEA B4 could cause damages to the engine that are not covered by the
warranty.
251
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
According to
Service Schedule
According to
Service Schedule
According to
Service Schedule
According to
Service Schedule
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use Fluid and lubricant specifications Original fluids Change
for correct car operation and lubricants
Lubricants for
petrol engines
(2.2 JTS and
3.2 JTS versions)
Lubricant for
petrol engines
(1750 TURBO
BENZINA versions)
Lubricants for
diesel engines
(2.4 JTDMversions)
Lubricants for
diesel engines
(2.0 JTDMversions)Synthetic-based oils, SAE 5W-40 grade.
FIAT 9.55535-H2qualification
Synthetic-based oils, SAE 5W-40 grade, ACEA C3.
FIAT 9.55535-S2 qualification
Synthetic-based oils, SAE 5W-40 grade.
FIAT 9.55535-N2 qualification
Synthetic-based oils, SAE 5W-30 grade.
FIAT 9.55535-S1 qualificationSELENIA StAR
Contractual Technical
Reference N
°F216.D05
SELENIA StAR P.E.
Contractual Technical
Reference N
°F603.D08
SELENIA WR
Contractual Technical
Reference N
°F515.D06
SELENIA WR P.E.
Contractual Technical
Reference N
°F510.D07

252
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
TUTELA CAR
MATRYX
Contractual Technical
Reference N° F108.F02
TUTELA
MULTIAXLE
Contractual Technical
Reference N° F426.E06
TUTELA GI/RContractual Technical
Reference N° F428.H04
TUTELA ALL STARContractual Technical
Reference N° F702.G07
TUTELA STAR 700Contractual Technical
Reference N° F701.C07
TUTELA TOP 4Contractual Technical
Reference N° F001.A93
PARAFLUUP(●)Contractual Technical
Reference N° F101.M01
TUTELADIESEL ARTContractual Technical
Reference N° F601.L06
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference N° F201.D02
Mechanical gearbox and
differential
Rear differential and
transmission unit
(3.2 JTS version)
Power steering
CV joints
on wheel side
CV joints
on differential side
Hydraulic brake and
clutch controls
Cooling circuits
Proportion:
50% water and
50%PARAFLU
UP(❑)
To be mixed with fuel oil
(25 cc per 10 litres)
To be used diluted or
undiluted in windscreen/
rear window washer/
wiper systems Brake fluid
Windscreen/
headlight washer
fluid
Use Fluid and lubricant specifications Original fluids Applications
for correct car operation and lubricants
Protective agent
for radiators Lubricants and
greases
for transmission
(●)IMPORTANTDo not top up or mix with fluids having different specifications from those described here.(❑)For particularly hard climate conditions, we recommend use of a 60% PARAFLUUPand 40% demineralized water mixture.
Additive for
diesel fuel
Synthetic-based oil, grade SAE 75W-85
Passes API GL 4 specifications.
QualificationFIAT 9.55550-MZ1
Synthetic-based oil, grade SAE 75W-90
Passes API GL-5, ZF-TE ML 18 specifications.
QualificationFIAT 9.55550-DA3
Synthetic fluid for hydraulic and electrohydraulic systems.
QualificationFIAT 9.55550-AG3.
Grease containing Molybdenum bisulphide for high temperature
appliances. N.L.G.I. 1-2 consistency.
QualificationFIAT 9.55580.
Grease for homokinetic joints with low friction coefficient.
NLGI 0-1 consistency.
QualificationFIAT 9.55580.
Synthetic fluid for Brake and clutch controls FMVSS n° 116
DOT 4, ISO 4925, SAE J1704, CUNA NC 956-01
QualificationFIAT 9.55597.
Protective with antifreeze action, red colour based on inhibited
monoethylen glycol and organic formula, that passes
CUNA NC 956-16, ASTM D 3306 specifications
QualificationFIAT 9.555523.
Additive for diesel fuels with antifreeze and protective action for
Diesel engines
Mixture of alcohol, water and surfactants CUNA NC 956-11
QualificationFIAT 9.55522.

260
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
INDEX
Engine starting ........................ 138
Environment protection ............. 114
EOBD system .......................... 104
External lights ......................... 65
Fix&Go automatic (device) ....... 176
Flashing the headlights ............. 65
Fluid level checks..................... 214
Fluids and lubricants ................. 251
Follow me home (device) ......... 66
Front air bags.......................... 128
Front ceiling lights
– bulb replacement ................ 191
– control .............................. 75
Front fog lights
– bulb replacement ................ 188
– control .............................. 67
Front headlights (washed) ........ 232
Fuel
– consumption...................... 253
– fuel cut-off switch ............... 77
– fuel gauge ......................... 22Fuel cut-off and power
supply switches ..................... 77
Fuel feed ................................ 240
Fuel filler cap .......................... 113
Fuses (replacement) ................ 194
Gearbox (use) ........................ 144
Glove compartment.................. 81
Glove compartment light
– bulb replacement ................ 192
Handbrake ............................. 143
Hazard lights ........................... 67
Head restraints ........................ 44
Headlight washer
– control .............................. 71
– fluid level.......................... 219
Headlights
– adjusting headlight beam ..... 97
– headlight adjustment abroad .. 98
– headlight aiming device ....... 97
– front fog light adjustment ..... 98
Hill Holder system. ................... 102 DPF (Diesel Particulate Filter) .... 114
Dimensions ............................. 247
Dipped beam headlights
– bulb replacement ................ 186
– control .............................. 65
Direction indicators
– bulb replacement 186-187-188
– control .............................. 65
Doors ..................................... 86
Electronic key .......................... 11
Engine
– identification code ............... 238
– marking ............................ 237
– technical data .................... 239
Engine compartment (washed) .. 233
Entine coolant
temperature gauge................. 23
Engine oil
– consumption...................... 217
– level check ........................ 216
– specifications ..................... 251
Engine oil temperature gauge .... 24

DASHBOARD
A0F0188mfig. 1
1.Adjustable and swivel side air vents - 2.Front side window demisting/defrosting vents - 3.Passenger’s air bag -
4.Fuel level gauge/engine coolant temperature gauge/engine oil temperature gauge (petrol versions) or turbocharger pres-
sure gauge (diesel versions) - 5.Adjustable swivel centre air vents - 6.Upper central vent - 7.External lights control lever -
8.Driver’s air bag and horn - 9.Instrument panel - 10.Windscreen wiper control lever - 11.Front side window demist-
ing/defrosting vents - 12.Adjustable swivel side air vents - 13.Switches for external lights, trip meter reset and headlamp
aiming device - 14.Dashboard fusebox lid - 15.Bonnet opening lever - 16.Sound system controls on the steering wheel
(where provided) - 17.Driver’s knees air bag - 18.Cruise Control lever (where provided) - 19.Ignition device - 20.En-
gineSTART/STOPbutton - 21.Heating/ventilation/climate controls - 22.Sound system (where provided) -
23.Glove box - 24.Passenger’s knees air bag (where provided)
263
RIGHT HAND DRIVE VERSION

Oil change? The experts recommend Selenia
The engine of your car is factory filled with Selenia.
This is an engine oil range which satisfies the most advanced
international specifications. Its superior technical characteristics
allowSelenia to guarantee the highest performance
and protection of your engine.
The Selenia range includes a number of technologically advanced products:
SELENIA SPORT
Fully synthetic lubricant capable of meeting the needs of
high performance engines.
Studied to protect the engine also in high thermal stress
conditions, it prevents deposits on the turbine to achieve
the utmost performance in total safety.
SELENIA WR PURE ENERGY
Fully synthetic lubricant that can meet the requirements of
the latest diesel engines.
Low ash content to protect the particulate filter from the
residual products of combustion. High Fuel Economy
System that allows considerable fuel saving.
It reduces the danger of dirtying the turbine to ensure the
protection of increasingly high performance diesel
enginesSELENIA StAR PURE ENERGY
Synthetic lubricant designed for petrol engines that need
products with a low ash content. It maximises the
characteristics of engines with high specific power,
protects the parts mostly subjected to stress and helps
to keep modern catalysts clean.
SELENIA RACING
This lubricant has been developed as a result of Selenia’s
extensive experience in track and rally competitions,
it maximises engine performance in all kinds of
competition use.
The range also includes K Pure Energy, Selenia Digitech,
Selenia Multipower, Selenia 20K, Selenia 20K AR.
For further information on Selenia products visit the web
sitewww.selenia.com

ENGINE OIL CHANGE (litres)
REFUELLING (litres)
CUSTOMER SERVICESTECHNICAL SERVICES – SERVICE ENGINEERING
Largo Senatore G. Agnelli, 5 – 10040 Volvera – Torino (Italia)
Fiat Group Automobiles S.p.A.
Publication no. 60438106 – 3 Edition – 04/2010
All rights reserved. Reproduction, even in part is prohibited without written permission
from Fiat Group Automobiles S.p.A.
SERVICE
1750 TURBO BENZINA 3.2 JTS 2.0 JTDM2.4 JTDM
Engine oil circuit 5.0 5.4 4.9 6.4
Do not discard used oil in the environment.
COLD TYRE INFLATION PRESSURE
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
Inflate tyres to full load pressures if driving at continuous speed exceeding 160 km/h
(
▼) Unchainable tyres. When using winter tyres, use 225/50 R17 98 tyres or 235/45 R18 98.
1750 TURBO BENZINA - 2.0 JTDM- 2.4 JTDM- 3.2 JTS
Fuel tank capacity 70
Reserve 10
For cars with petrol engine, only use unleaded petrol with no less than 95 (R.O.N.).
For cars with diesel engine, only use diesel fuel for motor vehicles (Specification EN590).
average loadbar
full loadbar
Sapce-saver spare wheelT125/80 R17
4.2
Tyres
225/50 R17 98W
front rear
2.5 2.5
2.7 2.7
Tyres
235/45 R18 98W (O)
front rear
2.7 2.5
2.8 2.6
Tyres
235/40 ZR19 96Y (O)
front rear
2.7 2.5
2.9 2.7