2010 Alfa Romeo Brera/Spider technical specifications

245
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CARAdd +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
Inflate tyres to full load pressures if driving at continuous speed exceeding 160 km/h.
(
▼) Unchainable tyres. When using winter tyres, use 225/50 R17 98 tyres or 235/45 R18 98.
COLD TYRE INFLATION PRESSURE
average load bar
full load barSapce-saver spare wheel
T125/80 R17
4.2
Tyres
225/50 R17 98W
front rear
2.5 2.5
2.7 2.7
Tyres
235/45 R18 98W (O)
front rear
2.7 2.5
2.8 2.6
Tyres
235/40 ZR19 96Y (O)
front rear
2.7 2.5
2.9 2.7

246
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS– camber
front wheels: – caster
– half toe-in
17” rim (*)
18” rim (*)
– camber
Rear wheels:
– half toe-in
17” rim (*)
18” rim (*)
CORRECT USE
OF THE CAR
WHEEL GEOMETRY
1750 TURBO BENZINA - 2.2 JTS - 2.0 JTDM- 2.4 JTDMversions
–34’ ± 18’
max. difference right/left: 24’
4° 15’ ± 18’
max. difference right/left: 18’
–1.00 ± 0.5 mm
–1.05 ± 0.5 mm
–56’ ± 18’
max. difference right/left: 24’
–1.63 ± 0.9 mm
–1.73 ± 0.9 mm
3.2 JTS version
–26’ ± 18’
max. difference right/left: 24’
4° 15’ ± 18’
max. difference right/left: 18’
–1.00 ± 0.5 mm
–1.05 ± 0.5 mm
–58’ ± 18’
max. difference right/left: 24’
–1.63 ± 0.9 mm
–1.73 ± 0.9 mm
– camber
Front wheels: – caster
– half toe-in
17” rim (*)
18” rim (*)
– camber
Rear wheels:
– half toe-in
17” rim (*)
18” rim (*)
(*) values in degrees: – 8’ ± 4’ (maximum right/left difference: 4’)

247
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
DIMENSIONS
Dimensions are
expressed in mm and
refer to the car fitted
with standard tyres.
Min. size variations
when optional tyres are
fitted.
The height refers to
the car unladen.
BOOT VOLUME
Boot volume: 220 dm3
(or 300 dm3according
to versions)
(■) With tyres 225/50 R17”
A0F0044mfig. 6
ABCDE FGH
4410 1000 2528 882 1341 1593 1830 1573
1579 (■) 1559 (■)

248
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
PERFORMANCE
Top speed Acceleration Kilometer with standing start
from 0-100 km/h
km/h sec. sec.
1750 TURBO BENZINA235 7.7 28.9
3.2 JTS 4x2250 (*) 7.0 26.9
3.2 JTS 4x4244 6.8 27.2
2.0 JTDM218/215 (**) 8.8/9.0 (**) 30.2/30.5 (**)
2.4 JTDM231 7.9 28.4
(*) With Michelin 17” tyre
(**) For specific markets

249
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
WEIGHTS
2.4 JTDM
1575
1200
1050
2035
460
1500
60
80
1750 TURBO
BENZINA
1430
1100
1050
1890
460
1450
60
80
3.2 JTS 4x4
1605
1200
1050
2065
460
1500
60
80
3.2 JTS 4x2
1540
1200
1050
2000
460
1500
60
80
2.0 JTDM
1480
1200
1050
1940
460
1500
60
80
Weights (kg)
Weight empty
(including fluids, 90% fuel
in the tank and no optional)
Maximum admitted load (*)
– front axle
– rear axle
– total
Payload including
driver (**)
Towable loads
Max. load
on ball
Max. load
on tailgate (***)
(*) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot an/or on the roof so
that they comply with these limits.
(**) If special equipment is fitted (sunroof, tow hitch etc.) the unladen weight increases, thus reducing the payload as specified in the
maximum weight allowed.
(***) Lineaccessori Alfa Romeo roof racks, max. capacity: 50 kg.

CAPACITIES
2.4 JTDM
70❍10❍
7.35
6.4
❑
2.8
6.0
1750 TURBO
BENZINA
70●10●
6.6
5.0
✰
2.0
6.0
3.2 JTS
70●10●
10.3
5.4
■
2.8
6.0
Fuel tank: litres
– including a reserve of litres
Engine cooling system litres
Lubrication system
engine litres
Mechanical gearbox/differential litres
Windscreen washer fluid reservoir
with headlight washer litres
250
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
Specified fuelsand original lubricants
●Unleaded petrol with no less than
95 R.O.N. (Specifica EN228)
❍Diesel fuel for motor vehicles
(EN590 Specification)
Mixture of 50% water and PARAFLU
UP(❑)
■SELENIA StAR
✰SELENIA StAR P.E.
(1750 TURBO BENZINA versions)
❑SELENIA WR
★SELENIA WR P.E.(2.0 JTDMversions)
TUTELA CAR MATRYX
Mixture of water and
TUTELA PROFESSIONAL SC 35
(
❑)For particularly hard climate conditions, we recommend use of a 60% PARAFLUUPand 40% demineralized water mixture.
2.0 JTDM
70❍10❍
6.1
4.9
★
2.8
6.0

For diesel engines, in the event of emergencies when genuine products are not available, lubricants providing at least ACEA B4 or
ACEA C2 performance are allowed; in that case, engine best performance is not guaranteed; we recommend to have it replaced as
soon as possible with the recommended lubricants by the Alfa Romeo Authorized Services.
Use of products with low-quality properties than ACEA A3 and ACEA B4 could cause damages to the engine that are not covered by the
warranty.
251
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
According to
Service Schedule
According to
Service Schedule
According to
Service Schedule
According to
Service Schedule
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use Fluid and lubricant specifications Original fluids Change
for correct car operation and lubricants
Lubricants for
petrol engines
(2.2 JTS and
3.2 JTS versions)
Lubricant for
petrol engines
(1750 TURBO
BENZINA versions)
Lubricants for
diesel engines
(2.4 JTDMversions)
Lubricants for
diesel engines
(2.0 JTDMversions)Synthetic-based oils, SAE 5W-40 grade.
FIAT 9.55535-H2qualification
Synthetic-based oils, SAE 5W-40 grade, ACEA C3.
FIAT 9.55535-S2 qualification
Synthetic-based oils, SAE 5W-40 grade.
FIAT 9.55535-N2 qualification
Synthetic-based oils, SAE 5W-30 grade.
FIAT 9.55535-S1 qualificationSELENIA StAR
Contractual Technical
Reference N
°F216.D05
SELENIA StAR P.E.
Contractual Technical
Reference N
°F603.D08
SELENIA WR
Contractual Technical
Reference N
°F515.D06
SELENIA WR P.E.
Contractual Technical
Reference N
°F510.D07

252
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
CORRECT USE
OF THE CAR
TUTELA CAR
MATRYX
Contractual Technical
Reference N° F108.F02
TUTELA
MULTIAXLE
Contractual Technical
Reference N° F426.E06
TUTELA GI/RContractual Technical
Reference N° F428.H04
TUTELA ALL STARContractual Technical
Reference N° F702.G07
TUTELA STAR 700Contractual Technical
Reference N° F701.C07
TUTELA TOP 4Contractual Technical
Reference N° F001.A93
PARAFLUUP(●)Contractual Technical
Reference N° F101.M01
TUTELADIESEL ARTContractual Technical
Reference N° F601.L06
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference N° F201.D02
Mechanical gearbox and
differential
Rear differential and
transmission unit
(3.2 JTS version)
Power steering
CV joints
on wheel side
CV joints
on differential side
Hydraulic brake and
clutch controls
Cooling circuits
Proportion:
50% water and
50%PARAFLU
UP(❑)
To be mixed with fuel oil
(25 cc per 10 litres)
To be used diluted or
undiluted in windscreen/
rear window washer/
wiper systems Brake fluid
Windscreen/
headlight washer
fluid
Use Fluid and lubricant specifications Original fluids Applications
for correct car operation and lubricants
Protective agent
for radiators Lubricants and
greases
for transmission
(●)IMPORTANTDo not top up or mix with fluids having different specifications from those described here.(❑)For particularly hard climate conditions, we recommend use of a 60% PARAFLUUPand 40% demineralized water mixture.
Additive for
diesel fuel
Synthetic-based oil, grade SAE 75W-85
Passes API GL 4 specifications.
QualificationFIAT 9.55550-MZ1
Synthetic-based oil, grade SAE 75W-90
Passes API GL-5, ZF-TE ML 18 specifications.
QualificationFIAT 9.55550-DA3
Synthetic fluid for hydraulic and electrohydraulic systems.
QualificationFIAT 9.55550-AG3.
Grease containing Molybdenum bisulphide for high temperature
appliances. N.L.G.I. 1-2 consistency.
QualificationFIAT 9.55580.
Grease for homokinetic joints with low friction coefficient.
NLGI 0-1 consistency.
QualificationFIAT 9.55580.
Synthetic fluid for Brake and clutch controls FMVSS n° 116
DOT 4, ISO 4925, SAE J1704, CUNA NC 956-01
QualificationFIAT 9.55597.
Protective with antifreeze action, red colour based on inhibited
monoethylen glycol and organic formula, that passes
CUNA NC 956-16, ASTM D 3306 specifications
QualificationFIAT 9.555523.
Additive for diesel fuels with antifreeze and protective action for
Diesel engines
Mixture of alcohol, water and surfactants CUNA NC 956-11
QualificationFIAT 9.55522.